Sig Sauer

The Sig Sauer Romeo1 Miniature Reflex Sight was designed for quick, natural target acquisition with the modern semi-auto pistol, MSR platforms, and shotguns. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, and manual brightness control, 3MOA red dot with multiple intensity settings for a wide range of lighting conditions, Aircraft grade CNC aluminum housing with top mounted battery compartment, waterproof and fogproof performance, and high performance coating for superior brightness and light transmission. Comes with M1913 mount.

The Sig Sauer Romeo3 Reflex Sight is designed with quick target acquisition in mind. Ideal for handguns, rifles, carbines and shotguns, the Romeo3 is designed for Picatinny and Keymod mounts. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, and manual brightness control, 3MOA red dot with multiple intensity settings for a wide range of lighting conditions, Aircraft grade CNC aluminum housing, waterproof and fogproof performance, and proprietary red notch coating for superior brightness and light transmission. Comes with M1913 high mount.

When fast target acquisition is a must, look no further than the Sig Sauer Romeo4H red dot sight. As tough and dependable as Sig Sauer firearms, the Romeo4 lets you shoot with both eyes open no matter the weather conditions, lighting conditions or terrain. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds), 12 illumination settings, CR2032 battery with 50,000 hours of runtime, torx mount and QD mount, as well as advanced waterproof and fogproof performance.

Sig Sauer factory Safety Lever Pin for the P320.

Replacement barrel for your SIGPRO 2022/2009. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. Note: Will fit SigPro's with the loaded chamber indicator on the top of the slide. M13.5 X 1 LH Threads. Thread Protector Included.

* NOTE * All barrels may require minor fitting.

Sig Sauer factory Slide Catch Spring Post for the P320.

The Sig Sauer SRD45 Suppressor Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD45 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD45 ships with both .578-28tpi and M16x1mm LH pistons. The SRD45 can be converted to use with 9mm or .40S&W host pistols by using the appropriate threaded accessory piston.

-Length: 7.9x1.38 in.

-Weight: 12.0 ounces

-Threads: .578-28 tpi / M16x1

-dB level - 133dB

The Sig Sauer SRD762-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD762-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads. The SRD762-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake.

-Length: 7.0x1.625 in.

-Weight: 17.0 ounces

-Threads: 5/8"-24 tpi

-dB level - 140dB

The Sig Sauer SRD762Ti is a Grade 5 Titanium direct thread suppressor. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. The SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads.

-Length: 9.3x1.75 in.

-Weight: 17.6 ounces

-Threads: 5/8"-24 tpi

-dB level - 135dB

The Sig Sauer SRD9 9mm Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD9 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD9 ships with both 1/2”x 28tpi and M13.5x1mm LH pistons.

-Length: 7.2 x 1.38 in.

-Weight: 9.0 ounces

-Threads: 1/2-28 tpi / M13.5x1LH

-dB level - 128dB

Factory Sig Sauer Sriker Housing for the P320.

Sig Sauer factory Trigger Bar for P226/228/229 DAK models.

Sig Sauer factory Trigger Pivot Pin for P239 models.

Sig Sauer factory Trigger Pivot Pin for the SP2022.

The Sig Sauer X-RAY3 Night Sights are rugged, all steel sights for duty, carry, or sporting pistols. This 3 dot tritium night sight set features a blacked out rear with green high visibility front sight for intuitive front sight acquisition day or night. Ideal for duty and defensive pistols where a quick front sight picture is advantageous. Available with U-notch or traditional square rear sight picture. Green/Green. Fits Classic P-Series, P320, P250, P938 and P238.

Sig Sauer .40S&W 165 GR. Elite V-Crown Jacketed Hollow Point - 20RD Box

-Muzzle Velocity: 1090 FPS

-Muzzle Energy: 435 FT-LBS

Replacement barrel for your P229-1 E2 9mm. These are factory Sig Sauer drop-in barrels. Not for use in a 357SIG or .40S&W Slide. NOTE: This barrel will not fit standard P228/P229 9mm models.

* NOTE * All barrels may require minor fitting.

Sig Sauer factory magazine catch for the Sig P238. Satin Nickel finish.