Sig Sauer

The SIG SAUER P238 Blackwood pistol is the ultimate choice for deep concealment or back-up gun, measuring only 5.5" by 3.96 " and weighing less than 1 pound. This pistol comes with a SIGLITE night sights, Two-Tone finish, logo Blackwood grips and a SAO trigger with a manual thumb safety. Comes with one 6RD magazine.

Factory Sig Sauer P320/250 Grip Module allows the shooter to tailor the pistol to meet their specific grip size requirements. Black polymer construction. This is the small grip for the 9mm, .40S&W and .357SIG P320/250 Compact. New style grip module with picatinny rail. Only new style P250 magazines will fit this module.

*Note: These are the updated Grip Modules these Grip Modules are NOT compatible with the older style slide catch lever.

New from Sig Sauer comes the P320 striker fired pistol. Featuring a newly designed striker fired action that is pretensioned for a crisp light pull and a short, positive reset. Slide takedown is prohibited without removal of the magazine, and takedown is accomplished without tools or manipulation of trigger for enhanced safety. A five point safety system as well as the ability to completely change caliber and grip configurations for different size hands make this ideal for duty or home defense. The P320 Carry features a full size grip with a shortened slide for ease of carry. Comes with two 17RD magazines, lock and case.

Slightly larger than the P238, the Sig Sauer P938 9mm is chambered in 9mm and has a standard capacity of 6+1 rounds. Single Action Only, with an ambidextrous external thumb safety, the P938 is a very accurate pistol, much like the 1911 platform handguns, except much smaller! Easy concealment, 9mm, all metal contstruction.

The Sig Sauer Romeo1 Miniature Reflex Sight was designed for quick, natural target acquisition with the modern semi-auto pistol, MSR platforms, and shotguns. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, and manual brightness control, 3MOA red dot with multiple intensity settings for a wide range of lighting conditions, Aircraft grade CNC aluminum housing with top mounted battery compartment, waterproof and fogproof performance, and high performance coating for superior brightness and light transmission. Comes with M1913 mount.

When fast target acquisition is a must, look no further than the Sig Sauer Romeo4H red dot sight. As tough and dependable as Sig Sauer firearms, the Romeo4 lets you shoot with both eyes open no matter the weather conditions, lighting conditions or terrain. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds), 12 illumination settings, CR2032 battery with 50,000 hours of runtime, torx mount and QD mount, as well as advanced waterproof and fogproof performance.

Converts your SIGPRO 2022/2340 from .40S&W to 357SIG or replaces your original 357SIG barrel. These are factory Sig Sauer barrels. May require fitting. Will not fit SigPro's with the loaded chamber indicator on the top of the slide.

* NOTE * All barrels may require minor fitting.

The Sig Sauer SRD338Ti-QD Suppressor is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD338Ti-QD is rated up to the 338 Lapua Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 300 Win Mag, 7.62x39mm, 7.62x35 (300 Blackout), 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. The SRD338Ti-QD comes with one M18x1.5mm Taper-Lok muzzle brake. Other muzzle devices are available.

-Length: 10.5x1.75 in.

-Weight: 18.9 ounces

-Threads: M18x1.5mm

-dB level - 138dB

The Sig Sauer SRD45 Suppressor Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD45 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD45 ships with both .578-28tpi and M16x1mm LH pistons. The SRD45 can be converted to use with 9mm or .40S&W host pistols by using the appropriate threaded accessory piston.

-Length: 7.9x1.38 in.

-Weight: 12.0 ounces

-Threads: .578-28 tpi / M16x1

-dB level - 133dB

The Sig Sauer SRD556-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.5x1.625 in

-Weight: 14.0 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

The Sig Sauer SRD762Ti is a Grade 5 Titanium direct thread suppressor. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. The SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads.

-Length: 9.3x1.75 in.

-Weight: 17.6 ounces

-Threads: 5/8"-24 tpi

-dB level - 135dB

Factory Sig Sauer Sriker Housing for the P320.

SIG factory Standard Nickel Trigger for older production P220 and P245 models with the narrow trigger, 8mm. Will not fit current produced P220's with 10mm trigger.

Sig Sauer factory Magazine Base Plate for P239 9mm 8 round magazines.

Sig Sauer .44 Magnum 240 GR. Elite V-Crown Jacketed Hollow Point - 20RD Box

-Muzzle Velocity: 1300 FPS

-Muzzle Energy: 901 FT-LBS

Sig Sauer 300BLK 125 GR. Elite Match Grade OTM - 20RD Box

-Muzzle Velocity: 2200 FPS

-Muzzle Energy: 1343 FT-LBS

Factory replacement nickel grip plate screw (1) for P220, P225, P230 and P245. These will also work for the P232 where a thinner head is desired for the grip.