Sig Sauer

Products

Sig Sauer P938 9mm, Night Sights, Rosewood

Sig Sauer P938 9mm, Night Sights, Rosewood

Slightly larger than the P238, the Sig Sauer P938 Rosewood 9mm is chambered in 9mm and has a standard capacity of 6+1 rounds. Single Action Only, with an ambidextrous external thumb safety, the P938 is a very accurate pistol, much like the 1911 platform handguns, except much smaller! Easy concealment, 9mm, all metal contstruction. Comes with one 6RD magazine, lock, and case.

938-9-RG-AMBI

In stock

$629.99

Sig Sauer Romeo1 1X30mm Miniature Reflex Sight - 3MOA Red Dot

Sig Sauer Romeo1 1X30mm Miniature Reflex Sight - 3MOA Red Dot

The Sig Sauer Romeo1 Miniature Reflex Sight was designed for quick, natural target acquisition with the modern semi-auto pistol, MSR platforms, and shotguns. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, and manual brightness control, 3MOA red dot with multiple intensity settings for a wide range of lighting conditions, Aircraft grade CNC aluminum housing with top mounted battery compartment, waterproof and fogproof performance, and high performance coating for superior brightness and light transmission. Comes with M1913 mount.

SOR11001

In stock

$399.99

Sig Sauer Romeo3 1X25mm Reflex Sight - 3MOA Red Dot

Sig Sauer Romeo3 1X25mm Reflex Sight - 3MOA Red Dot

The Sig Sauer Romeo3 Reflex Sight is designed with quick target acquisition in mind. Ideal for handguns, rifles, carbines and shotguns, the Romeo3 is designed for Picatinny and Keymod mounts. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, and manual brightness control, 3MOA red dot with multiple intensity settings for a wide range of lighting conditions, Aircraft grade CNC aluminum housing, waterproof and fogproof performance, and proprietary red notch coating for superior brightness and light transmission. Comes with M1913 high mount.

SOR31002

In stock

$349.99

Sig Sauer Romeo4H 1X20mm Red Dot/Ballistic Circle Dot - 2 MOA

Sig Sauer Romeo4H 1X20mm Red Dot/Ballistic Circle Dot - 2 MOA

When fast target acquisition is a must, look no further than the Sig Sauer Romeo4H red dot sight. As tough and dependable as Sig Sauer firearms, the Romeo4 lets you shoot with both eyes open no matter the weather conditions, lighting conditions or terrain. Features MOTAC (Motion Activated Illumination System), a motion sensor for automatic on/off, 4 different integrated reticle options (Dot, Circle-Dot, Dot with Holds, Circle-Dot with Holds), 12 illumination settings, CR2032 battery with 50,000 hours of runtime, torx mount and QD mount, as well as advanced waterproof and fogproof performance.

SOR43011

In stock

$349.99

Sig Sauer SRD338Ti-QD Suppressor - .338 Lapua

Sig Sauer SRD338Ti-QD Suppressor - .338 Lapua

The Sig Sauer SRD338Ti-QD Suppressor is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD338Ti-QD is rated up to the 338 Lapua Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 300 Win Mag, 7.62x39mm, 7.62x35 (300 Blackout), 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. The SRD338Ti-QD comes with one M18x1.5mm Taper-Lok muzzle brake. Other muzzle devices are available.

-Length: 10.5x1.75 in.

-Weight: 18.9 ounces

-Threads: M18x1.5mm

-dB level - 138dB

SRD338TI-QD

In stock

$999.99

Sig Sauer SRD45 Suppressor - .45ACP

Sig Sauer SRD45 Suppressor - .45ACP

The Sig Sauer SRD45 Suppressor Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD45 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD45 ships with both .578-28tpi and M16x1mm LH pistons. The SRD45 can be converted to use with 9mm or .40S&W host pistols by using the appropriate threaded accessory piston.

-Length: 7.9x1.38 in.

-Weight: 12.0 ounces

-Threads: .578-28 tpi / M16x1

-dB level - 133dB

SRD45

In stock

$699.99

Sig Sauer SRD556-QD Suppressor - 5.56mm

Sig Sauer SRD556-QD Suppressor - 5.56mm

The Sig Sauer SRD556-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.5x1.625 in

-Weight: 14.0 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

SRD556-QD

In stock

$679.99

Sig Sauer SRD762Ti Suppressor - 7.62mm

Sig Sauer SRD762Ti Suppressor - 7.62mm

The Sig Sauer SRD762Ti is a Grade 5 Titanium direct thread suppressor. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. The SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads.

-Length: 9.3x1.75 in.

-Weight: 17.6 ounces

-Threads: 5/8"-24 tpi

-dB level - 135dB

SRD762TI

In stock

$999.99

Sig Sauer SRT Sear - P220/226/229/239

Sig Sauer SRT Sear - P220/226/229/239

Sig Sauer factory SRT Sear for P220, P226, P229 and P239 DA/SA models. Short Reset Trigger Sear.

SEAR-3

In stock

$39.95

Sig Sauer Striker Housing - P320

Sig Sauer Striker Housing - P320

Factory Sig Sauer Sriker Housing for the P320.

1300745

In stock

$19.99

Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue

Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue

Sig Sauer factory Take Down Lever for P227, P220, P225, P226, P228, P229, P239 and P245 models. Part number changed from 34229065.

LEVER-6

In stock

$29.95

Sig Sauer X-RAY3 Night Sights, #6 Front, #6 Rear - U-Notch

Sig Sauer X-RAY3 Night Sights, #6 Front, #6 Rear - U-Notch

The Sig Sauer X-RAY3 Night Sights are rugged, all steel sights for duty, carry, or sporting pistols. This 3 dot tritium night sight set features a blacked out rear with green high visibility front sight for intuitive front sight acquisition day or night. Ideal for duty and defensive pistols where a quick front sight picture is advantageous. Available with U-notch or traditional square rear sight picture. Green/Green. Fits Classic P-Series, P320, P250, P938 and P238.

SOX10006

In stock

$129.99

SIG Standard Trigger - P220, P245 Nickel

SIG Standard Trigger - P220, P245 Nickel

SIG factory Standard Nickel Trigger for older production P220 and P245 models with the narrow trigger, 8mm. Will not fit current produced P220's with 10mm trigger.

34221210N

In stock

$39.95

Hogue Rubber Finger Groove Grips P220 w/Sig Logo - Dark Earth

Hogue Rubber Finger Groove Grips P220 w/Sig Logo - Dark Earth

Hogue rubber wrap around grip with Sig Logo for the Sig P220 pistol.

20005

In stock

$17.95

Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

TRIGGER-5

In stock

$29.95

Sig Sauer E2 Grip Kit P229 DAK

Sig Sauer E2 Grip Kit P229 DAK

Sig Sauer E2 Grip Kit for the P229 pistol with DAK trigger mechanism. This kit includes all of the required parts to convert to the E2 grip. The ergonomically designed, reduced circumference makes the shooters grip much more comfortable and will especially help those with smaller hands.

**Will not work on standard DA/SA trigger mechanisms**


GRIPKIT-229-E2-DAK

In stock

$67.99

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer factory ejector for P224, P228, P229, P239, P226 .40S&W and P226 .357SIG models.

EJECTOR-2

In stock

$7.95

Sig Sauer Extractor Spring - P227, P226, P229, P239 & P220

Sig Sauer Extractor Spring - P227, P226, P229, P239 & P220

SIG factory extractor spring for models with an external extractor.

SPRING-11

In stock

$3.95