Sig Sauer - Manufacturers - Top Gun Supply

Factory slide stop for Sig Sauer P230 models.

The Sig Sauer SRD556 is a direct thread suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.4x1.625 in.

-Weight: 11.5 ounces

-Threads: 1/2-28 tpi

-dB level - 133dB

The Sig Sauer SRD556-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.5x1.625 in

-Weight: 14.0 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

The Sig Sauer SRD556Ti is a Grade 5 Titanium direct thread suppressor. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.4x1.75 in.

-Weight: 9.8 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

The Sig Sauer SRD762 is a direct thread suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. The SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads.

-Length: 6.6x1.625 in.

-Weight: 15.5 ounces

-Threads: 5/8"-24 tpi

-dB level - 139dB

The Sig Sauer SRD762-QD is a quick detach suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD762-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads. The SRD762-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake.

-Length: 7.0x1.625 in.

-Weight: 17.0 ounces

-Threads: 5/8"-24 tpi

-dB level - 140dB

The Sig Sauer SRD762Ti is a Grade 5 Titanium direct thread suppressor. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. The SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads.

-Length: 9.3x1.75 in.

-Weight: 17.6 ounces

-Threads: 5/8"-24 tpi

-dB level - 135dB

The Sig Sauer SRD762Ti-QD is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD762Ti-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads. The SRD762Ti-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake. Other muzzle devices are available.

-Length: 8.3x1.75 in.

-Weight: 15.8 ounces

-Threads: 5/8"-24 tpi

-dB level - 137dB

The Sig Sauer SRD9 9mm Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD9 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD9 ships with both 1/2”x 28tpi and M13.5x1mm LH pistons.

-Length: 7.2 x 1.38 in.

-Weight: 9.0 ounces

-Threads: 1/2-28 tpi / M13.5x1LH

-dB level - 128dB

The Sig Sauer P220 SRT Kit includes all of the necessary parts to reduce the reset on you Sig Sauer pistol. We recommend installation to be performed by a certified armorer.

The Sig Sauer P226, P227, P228 and P229 SRT Kit includes all of the necessary parts to reduce the reset on you Sig Sauer pistol. We recommend installation to be performed by a certified armorer.

The Sig Sauer P239 SRT Kit includes all of the necessary parts to reduce the reset on you Sig Sauer pistol. We recommend installation to be performed by a certified armorer.

Sig Sauer SRT Safety Lever for the P226, P228, and P229 series pistols. Will NOT work on P227 series.

Sig Sauer factory SRT Sear for P220, P226, P229 and P239 DA/SA models. Short Reset Trigger Sear.

Sig Sauer factory Standard Trigger for the P320. Black finish.