SHORT BARREL RIFLES | SHOTGUNS

Sig Sauer MCX Virtus 9 inch short barrel rifle chambered in 300 Blackout. The Sig Sauer MCX Virtus is a completely modular weapon system built around Sig's proven short stroke gas piston system. Lightweight, free-floating aluminum M-LOK rail system, quick change barrel capability, ambidextrous AR-style controls, 9" CHF barrel, low-profile folding/telescoping stock, and multi-caliber capability, 5.56mm, .300 Blackout. Additional Virtus specific features include the Matchlite™ Duo trigger for crisp, clean pull, and flat dark earth finish. Comes with one 30RD magazine.

Featuring a 5.5" PDW barrel, the MCX platform has never been more compact or accessible. Ready to go where-ever it's needed, the MCX Rattler has a thin, foldable stock for easy concealment and stowage. This gun was designed from the ground up to be as discrete as possible while retaining all the capabilities of the MCX. Free-floating M-LOK handguards matched with a PDW upper and a PDW Ultra Thin Folding Aluminum Stock, the MCX Rattler SBR is the ideal choice for fast-moving operators.

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the Flat Dark Earth MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized (FDE or Black)

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

• LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
• UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
• BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
• GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
• BUFFER: H Buffer
• SIGHTS: Sold Separately
• HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum
• FINISH: Daniel Defense Tornado Cerakote

Taking the market by storm, the Sig Sauer MPX PDW has redefined the submachinegun category. Every component of the MPX has been thoroughly designed and rigorously tested to ensure reliability in any circumstance. Features AR-style ambidextrous controls, 8" barrel, rotating bolt system, short stroke piston, flared and beveled magwell, monolithic upper receiver, collapsible stock, Keymod aluminum handguard with detachable rail sections, flip-up sights and a 30RD 9mm magazine capacity. Comes with sling, detachable rail sections, and one 30RD (Gen 2) magazine.