SUPPRESSORS

Sig's MODX-9 features a user configurable modular baffle design. It has titanium construction with an unique exterior design which doubles as a wrench flats. Included are 1/2"-28 & M13.5x1LH threads, and fixed barrel spacer for use with carbines. The MODX-9 also features 21 points of impact adjustment.

The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights.

The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer.

9mm & 300 BLK

8.8oz, 6.90" Length

The Sig Sauer SRD22X .22LR Suppressor can be used on both pistols and rifles and features a Grade 9 Titanium outer tube with stainless steel baffles. An inner stainless steel tube enables easy disassembly and cleaning. Due to the durability of its materials, the SRD22X can be used with .22LR pistols or rifles, and pistols or rifles chambered in .17HMR/.17 Mach II and .22 Magnum. The SRD22X comes with a 1/2”x 28tpi and an available M9x.75 rear mount. Specifications are subject to change.

-Length: 5.8 in (147 mm)

-Weight: 5.1 oz (144 g)

-Threads: 1/2-28 tpi

The Sandman-S features a QD system is design perfection. The Satellite baffles are welded into a solid core for added strength and durability. An innovative 7.62 design first, the front cap is detachable and features an integrated flash hider. This affords better performance, particularly in low light conditions. The detachable front cap also provides some level of insurance should the Sandman-S get dropped or abused. *Note: Barrel must be concentric with bore- 7.62X39MM and 7.62X54R.

The Sig Sauer SRD556 is a direct thread suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.4x1.625 in.

-Weight: 11.5 ounces

-Threads: 1/2-28 tpi

-dB level - 133dB

Will ship from our St. Augustine Location.

The Sig Sauer SRD556Ti-QD is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556Ti-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.8x1.75 in.

-Weight: 11.8 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

Will ship from our St. Augustine location.

The Sig Sauer SRD762Ti-QD is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the mount. The SRD762Ti-QD is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. Utilizes the popular 5/8"-24tpi threads. The SRD762Ti-QD comes with one 5/8"-24tpi Taper-Lok muzzle brake. Other muzzle devices are available.

-Length: 8.3x1.75 in.

-Weight: 15.8 ounces

-Threads: 5/8"-24 tpi

-dB level - 137dB

Will Ship from our St. Augustine Location.

The Sig Sauer SRD9 9mm Pistol Suppressor features a Grade 9 Titanium tube and 17-4PH Stainless Steel baffles allowing for light weight and durability. The SRD9 features a booster for use with "Browning Tilting Barrel" type pistols. A fixed barrel spacer is also available. The SRD9 ships with both 1/2”x 28tpi and M13.5x1mm LH pistons.

-Length: 7.2 x 1.38 in.

-Weight: 9.0 ounces

-Threads: 1/2-28 tpi / M13.5x1LH

-dB level - 128dB

Will ship from our St. Augustine Location.

What sets the Mask apart is its marvelous performance and the ease with which it can be disassembled. It provides balance of performance, weight and extraordinary cleaning intervals that are unmatched by the competition. It features a blend of titanium and 17-4 PH stainless steel construction for direct thread applications. 6.60oz and 5.10" OAL.

Compatible with 22Hornet/5.7x28mm/22LR/17HMR/17WSM/22MAG

NOTE: Muzzle Brake is not included with Suppressor.

The Sandman-S features a QD system is design perfection. The Stellite baffles are welded into a solid core for added strength and durability. An innovative 7.62 design first, the front cap is detachable and features an integrated flash hider. This affords better performance, particularly in low light conditions. The detachable front cap also provides some level of insurance should the Sandman-S get dropped or abused. Compatible with 5.7X28MM (FNH), 17HMR, 17 HORNET, 22 HORNET, 5.56 NATO, 22-250 REM, .204 RUGER, .243 WIN, 6.5 CREEDMOOR, 6.8 SPC, 7.62 NATO, 7MM REM MAG, .30-06 SPRINGFIELD, 300 BLACKOUT, .300 WIN , 5.45X39MM. *Note- Barrel must be concentric with bore- 7.62X39MM and 7.62X54R.

The Wolfman is the next generation of suppression. Like its predecessor, it's a modular, multi-caliber suppressor. It specializes in subgun, light-duty rifle, and pistol use. It provides ultimate suppression in its full-length configuration while still providing exceptional performance when set up in the short configuration.

17-4PH Stainless Steel, Ships with 1/2x28 Direct Thread Insert.