SUPPRESSORS

The Sig Sauer SRD22X .22LR Suppressor can be used on both pistols and rifles and features a Grade 9 Titanium outer tube with stainless steel baffles. An inner stainless steel tube enables easy disassembly and cleaning. Due to the durability of its materials, the SRD22X can be used with .22LR pistols or rifles, and pistols or rifles chambered in .17HMR/.17 Mach II and .22 Magnum. The SRD22X comes with a 1/2”x 28tpi and an available M9x.75 rear mount. Specifications are subject to change.

-Length: 5.8 in (147 mm)

-Weight: 5.1 oz (144 g)

-Threads: 1/2-28 tpi

SilencerCo Hybrid 46 DTM is the same familiar face as the Hybrid 46 with a lighter mount. Featuring a titanium tube and fully-welded, 17-4 stainless steel and Inconel baffle stack, the Hybrid 46 DTM is tough enough to tame nearly every round that’ll fit through its .46 caliber bore. From pistols up to .45 caliber, lever guns up to .45-70 Gov’t, rifles in 5.56 on up to 338 Lapua Magnum energy levels firing bullets up to .46 caliber, this do-it-all silencer has you covered!

Full-auto and magnum-rated, the Hybrid 46 DTM uses a titanium tube to keep its weight down to just 13.7 ounces. The Hybrid 46 DTM can easily swap between all of your host weapons by using ASR mounts, a pistol booster, 3-Lug adapters, direct thread adapters, and more.

As with its modular siblings, the Omega 36M and Hybrid 46M, the Hybrid 46 is manufactured in Utah and protected by SilencerCo’s lifetime warranty.

TECHNICAL SPECIFICATIONS:

• Weight: 13.7 oz
• Length: 7.8”
• Diameter: 1.56"
• Build materials: titanium; stainless steel; Inconel
• Full-auto and magnum rated!
• The Hybrid uses the same pistons as the Octane Series, Osprey Series, and Omega K Series

The Hybrid is the silencer for any platform. Compatible with pistol calibers from 9mm to .45ACP, rifle calibers from 5.56mm to .4570 GOV and many in between like .458 SOCOM, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles and submachine guns. Boasting low-120 dBs on .300 BLK and remaining hearing safe with .4570 GOV, the Hybrid offers an unparalleled pairing of versatility and performance a combination youve come to expect from SilencerCo products. The Hybrid is rated down to 16" barrels for .4570 GOV and .458 SOCOM and down to 18" barrels for all magnum calibers up to .338 Lapua Magnum. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand.

SilencerCo's first modular centerfire rifle silencer the Omega 36M. The front baffle section can be removed to minimize weight and length or retained for maximum sound suppression. Installation of the front baffle section only needs to be hand tightened. Tool slots ensure easy removal with existing SilencerCo Charlie tools (shipped with the Omega 36M). Compatible with Charlie accessories, Direct Thread, ASR muzzle devices, Silencerco Pistons and the 9mm 3-Lug Mount. Functional on pistol, rifle and subgun platforms. The Omega 36M is rated down to 10" barrels for 223 Remington/5.56mm NATO, 16" barrels for 308 Winchester/7.62mm NATO, and 18" barrels for 300 Win Mag and 338 Lapua Mag. No barrel restrictions for 9MM and 300 BLK Subsonic. OAL is 5.10" - 7.60" and weighs 9.20-16.60oz.

• CALIBER: 9MM TO .45 ACP INCLUDING .300 BLK
• MUZZLE AVERAGE:

9MM: 137.7 DB
.40 S&W: 136.2 DB
.45 ACP: 135.9 DB
.300 BLK SUB: 133.5 DB
.300 BLK SUPER: 136.1 DB

• WEIGHT: 10.7 OZ

Must ship to a U.S. FFL dealer

The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights.

The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer.

9MM to 45ACP & 300 BLK Subsonic

9.2OZ, 7.90" Length

The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights.

The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer.

9mm & 300 BLK

8.8oz, 6.90" Length

1. CALIBER: 5.56 MM TO .300
2. MUZZLE AVERAGE:

5.56 MM: 129.6 DB
7.62MM: 132.9 DB
.300 BLK: 119.0 DB
.300 WM: 137.7 DB

1. WEIGHT: 23.4 OZ
2. LENGTH: 8.5" - 10.0"
3. DIAMETER: 1.50”
4. MATERIALS: STELLITE & STAINLESS STEEL

Must ship to a U.S. FFL dealer

The SureFire RYDER(TM) 22-S is a lightweight suppressor optimized for .17 HMR and .22 Long Rifle rimfire pistols and rifles. Built to exacting standards like our Fast-Attach(R) suppressors for centerfire calibers, the Ryder 22-S features a patented aluminum body with rounded ends and flutes to reduce weight with no sacrifice in strength, and is coated with a tough Mil-Spec hard-anodized finish that resists scratches, abrasion, and corrosion. At just over 5 ounces in weight and only 5.4 inches long, the compact RYDER 22-S minimizes effects on your weapon's weight and maneuverability. The RYDER 22-S features patented heat-treated stainless steel baffles that offer increased durability and are capable of handling 17 HMR and .22 WMR ammunition - even full-auto fire. Built-in spacers between the baffles help to reduce carbon buildup and keep the suppressor clean longer. The indexed, individually numbered baffles are easy to remove, disassemble, clean, and reassemble. The RYDER 22-S has a stainless steel back plate that contributes to overall durability. Single-point cut 1/2 X 28 threads provide secure and easy attachment to an appropriately threaded .22 caliber barrel, with no tools required. Simply screw the suppressor on until hand tight; unscrew it to remove. The RYDER 22-S comes standard with an included assembly/disassembly tool for removing the baffle stack and reassembling it after cleaning, and a spud-extension tool that aids in pushing the baffle stack out of the body tube.