SUPPRESSORS
Shop by:
 More
|
Products
SilencerCo Osprey 9 2.0 Suppressor - 9MM
|
The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights. The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer. 9mm & 300 BLK 8.8oz, 6.90" Length |
SU5184
In stock
$699.95
SilencerCo Hybrid 46 DTM Suppressor
|
SilencerCo Hybrid 46 DTM is the same familiar face as the Hybrid 46 with a lighter mount. Featuring a titanium tube and fully-welded, 17-4 stainless steel and Inconel baffle stack, the Hybrid 46 DTM is tough enough to tame nearly every round that’ll fit through its .46 caliber bore. From pistols up to .45 caliber, lever guns up to .45-70 Gov’t, rifles in 5.56 on up to 338 Lapua Magnum energy levels firing bullets up to .46 caliber, this do-it-all silencer has you covered! Full-auto and magnum-rated, the Hybrid 46 DTM uses a titanium tube to keep its weight down to just 13.7 ounces. The Hybrid 46 DTM can easily swap between all of your host weapons by using ASR mounts, a pistol booster, 3-Lug adapters, direct thread adapters, and more. As with its modular siblings, the Omega 36M and Hybrid 46M, the Hybrid 46 is manufactured in Utah and protected by SilencerCo’s lifetime warranty. TECHNICAL SPECIFICATIONS:
|
SU5401
In stock
$649.00
Griffin Armament Bushwacker 36, Modular 36 Cal
|
The Bushwhacker's durable 1.375x24 threaded 17-4 stainless steel tube chassis, is supplied with a Griffin Plan-A Taper Mount adapter, Taper Mount muzzle device, and a booster piston housing. These factory inclusions allow the Bushwhacker to quickly and easily be configured for centerfire rifle or handgun use. Its .36 caliber diameter provides end users with the most caliber flexibility possible, while retaining quality sound suppression. The suppressor also can be fitted to a 9mm pistol offering large flexibility. Additionally, .338 caliber, .30 caliber and .22 caliber Ratchet-LOK front caps can be interfaced with the Bushwhacker 36 further improving sound performance with specific calibers.
Rating
|
GABUSH36-W
In stock
$855.00
Griffin Armament Revolution 9, Modular 36 Cal
|
The original Revolution® 9 & 45 suppressors were the first pistol silencers developed and brought to market with a modular length feature set, and that Griffin innovation inspired all the other modular length pistol suppressors in the US marketplace. The (MOD 4) Revolution® 9 suppressor represents a total redesign around of package of end user feature interaction enhancements, making the suppressor more secure and easier to mount, as well as fast and easy to configure in length, and easy to disassemble, at vastly increased maintenance intervals. The forward extension allows tool-less reconfiguration, and the O-ring biased extension and front cap prevent inadvertent loosening of the extension or cap. The booster housing (mount accessory interface socket) is permanently installed so tightening and loosening the suppressor does not result in loosening of the booster housing. The housing accepts pistons, fixed barrel mounts and spacers, our Griffin developed industry first integrated 3 lug mount, as well as Plan A mounts.
Another major improvement introduced in the MOD 4 generation is the incorporation of Griffin’s patented CARBON-GARD™ baffle technology. This concept, originally debuted in the Checkmate HD suppressor, has applications for pistol suppressors to make cleaning and maintenance of the suppressor easier even after very high round counts. High temp silicon o-rings are positioned at each baffle interface as well as the end cap, blast chamber, and extension tubes to fully seal gases and carbon within the baffle stack. This gas seal prevents lead and carbon fouling from building up between the tube body and the baffle stack, eliminating instances of the baffle core being carbon locked inside of the tube body, a condition that is very annoying for the end user. Revolution® MOD 4 Suppressors ship with an included EZ-LOK™ piston providing a more secure, and rapid mounting system than direct thread. EZ-LOK™ barrel end adapters are available for purchase separately. Rating
|
GAREV9M4-W
In stock
$641.00
SilencerCo Omega 9K Suppressor - 9mm
|
The Omega K is the smallest, lightest and quietest silencer in its respective class. Full auto rated and usable with pistols, rifles, and submachine guns, the Omega K series offers extreme durability in an ultra compact package. With the fully welded, tubeless, minimalist Omega K, big sound suppression now comes in a tiny footprint. 4.7" OAL, 1.48" Diameter and 7.2oz. |
SU1544
In stock
$694.99
Anechoic Anechox 22 DT Titanium, .22LR
|
Ridiculously light, user-serviceable suppressor for your rimfire rifle or pistol. Whisper-quiet.
The AnechoX 22 is the absolute state-of-the-art and the pinnacle of performance for weight, sound, accuracy, and serviceability on your rimfire gun. All AnechoX suppressors utilize the unique X-Baffle Anechoic™️ Chamber System with an interrupted central tube. The AnechoX 22 is brilliantly engineered in Aerospace 7075 T6 Aluminum and Grade 5 STA 1000 Titanium for insanely high strength-to-weight ratios. Titanium is brilliantly used in the blast baffle, thread insert, and front cap to handle the higher uncorking pressure and temperature right at your firearm’s muzzle and to prevent thread galling and carbon lock.
|
X-22-B
In stock
$475.15
CAT NOAH 718 Suppressor, 6mm
|
C.A.T’s lead technical engineer – Mr. Noah Arkman, has focused his divine talents to a new, albeit less celestial, creation: a fully AI-engineered 6mm suppressor, with outputs from the realm of ballistic serenity. This isn’t any suppressor; it is the epitome of divine intervention in gun tech. Crafted with a heavenly blend of algorithmic precision, Surge Bypass technologies and prophetic insight, Noah’s creation boasts a form factor so sleek and an output so hushed that this AI-crafted marvel stands out not just as a product, but as a testament to what happens when ancient wisdom meets artificial intelligence. Finally, the venerable Ark architect has created the perfect bridge between 5.56mm and 6ARC muzzle velocities in a singular vessel, another Ark so to speak. NOAH has again corralled creatures by two.
|
CAT NOAH 718 HUB
In stock
$1250.00
Dead Air Armament Sandman-L Suppressor - 7.62 QD w/Mount
|
For those demanding absolute performance the Sandman-L(TM) delivers. Made and constructed from the same materials as the S version, the L is only 8.9 inches in length, but offers a true sound reduction of 31dB firing standard 7.62 ammunition. * This is the best performing and quietest 7.62 suppressor on the market. The Sandman-L(TM) uses our industry best QD system for fool-proof quick one handed mounting. No seizing, and minimal point of impact shifts. The mount features Nitride(R) finished 17-4 stainless steel construction for the ultimate in durability. The Stellite(R) baffles form a solid welded core for extreme durability with a detachable front cap featuring an integrated flash hider. The entire suppressor gets a Cerakote(R) finish for ultimate corrosion protection. For a tactical bolt rifle or a .308 AR there isn't a better can in the Sandman-L(TM) class. SPECS
|
SML762
In stock
$969.00
Dead Air Mojave 45 Suppressor, 45 ACP
|
The Mojave 45 is the next evolution of Dead Airs 45 AUTO silencer lineup. It incorporates the patent-pending Triskelion Gas Management System, which yields the benefits of low back pressure and excellent acoustics. The Mojave 45 is compatible with multiple hosts, including tilting barrel and fixed barrel systems. Full Auto: Pistol calibers up to 45 AUTO with no barrel length restrictions. 300 BLK subsonic with 8 barrel. Semi-Auto: 300 BLK supersonic, 350 Legend, 400 Legend subsonic, 450 Bushmaster subsonic. .357 Mag & .44 Mag lever-actions with 16 barrel. Must ship to a U.S. FFL dealer |
MOJAVE45BLK
In stock
$1029.00
Energetic Armament Ferox Suppressor, 5.56mm 1/2x28 Black Nitride
|
The Ferox is engineered to be ultra-strong without sacrificing durability. Developed specifically for 5.56mm platforms; particularly for short and mid barrel lengths optimizing low back pressure and excellent sounds suppression. The Ferox ships with a removable 1/2x28 direct thread adapter and is compatible with all industry standard 1.375x24 HUB or Bravo style quick-disconnect mounting systems.
|
EA13
In stock
$699.99
Energetic Armament VOX S Suppressor, 7.62mm, 5/8x24 Black Nitride
|
The VOX silencer represents the next level of precision engineered rifle silencers. The silencers core is CNC welded from C300 Maraging (MARtensitic AGING) nickel-cobalt superalloy. This aerospace alloy was developed and used by NASA to meet the extreme high-temp stress requirements of rocket motor casings with an incredible strength to weight ratio. The unique material science of the VOX means you don't have to compromise- you get the rugged full-auto rated capability of a heavy silencer with the light weight of less rugged titanium can. NO other silencer offers this spectrum of capabilities and features.
|
EA04
In stock
$889.00
Gemtech Lunar 45 Suppressor
|
The Gemtech Lunar-45 is the culmination of decades of silencer innovation. It is a light and quiet modular 45 caliber suppressor available that is able to be completely taken apart and cleaned. The Lunar-45 is crafted from military grade aluminum and titanium for the utmost in durability and strength. It comes with a .578"-28 tpi piston. |
12126
In stock
$744.95
Griffin Armament Checkmate HD 22 DT, .22 CAL
|
The new CHECKMATE-HD is a 5.8 ounce 5.7x28 pistol rated rimfire suppressor and utilizes ECO-FLOW baffle technology as well as newly developed CARBON-GARD technology- the subject of a pending patent. The 5.8 ounce, 5.04" overall length suppressor features a 17- 4 heat treated ECO-FLOW baffle system, front cap, and integrated EZ-LOK QD mounting system. The tube is 7075-T6 billet machined and hardcoat anodized for maximum strength.Rating
|
GACMHD22DT-W
In stock
$414.00
Griffin Armament Dual-Lok PSR Suppressor, 5.56mm 1/2x28
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for quite some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados. Griffin is reintroducing next generation over the barrel suppressors with the DUAL-LOK PSR suppressor series.
|
GADLPSR556-W
In stock
$1016.00
Griffin Armament Dual-Lok PSR Suppressor, 7.62mm 5/8x24
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados.
|
GADLPSR762-W
In stock
$1101.00
Griffin Armament Dual-Lok Suppressor, 5.56mm 1/2x28
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 5 features the DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL556-W
In stock
$889.00
Griffin Armament Dual-Lok Suppressor, 7.62 5/8x24
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 7 features the patent pending DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL762-W
In stock
$931.00
Otter Creek Titanium 22, .22LR - BLK
|
Titanium 22 is a simple, easy to use, easy to clean, light weight, small, quiet 22 suppressor. The mount threads longer to accommodate some of the longer threaded rifle barrels so you can use it without having to use a spacer or shim. The wrench flats in the front and rear of the suppressor can be used with any adjustable wrench from your local hardware store. Just a straight forward product that you can be happy you bought with your hard earned money.
|
TI22
In stock
$440.00