Wilson Combat

Products

Wilson Combat Magazine Catch Lock - 1911 - BLUE

Wilson Combat Magazine Catch Lock - 1911 - BLUE

Wilson Combat Magazine Catch Lock for all 1911 Magazine releases/catches. Blue finish.

R15B

In stock

$2.95

Wilson Combat Tactical Magazine Release - 1911 - STAINLESS

Wilson Combat Tactical Magazine Release - 1911 - STAINLESS

Wilson Combat Tactical Magazine Release extends 1/16" beyond the standard factory release. This magazine release provides extra length for positive magazine changes without being too long for carry. Magazine Release lock and spring not included. Stainless steel.

31TS

In stock

$26.95

Wilson Combat  Ambidextrous Tactical Thumb Safety - 1911 - BLUE

Wilson Combat Ambidextrous Tactical Thumb Safety - 1911 - BLUE

The Wilson Combat Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand. This is an essential feature for left handed shooters, but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required. Blued finish.

192B

In stock

$58.95

Wilson Combat  Tactical Thumb Safety - 1911 - BLUE

Wilson Combat Tactical Thumb Safety - 1911 - BLUE

Wilson Combat Thumb Safety for 1911 pistols, finished in blue. Pistols that are used for concealed carry and tactical use must have a narrow profile thumb safety to keep them from being accidentally disengaged and snagging on clothing when drawn. Yet once out of the holster they must be quickly manipulated without failure. Our Tactical Thumb Safeties are made just for that purpose. The extended lever is serrated to provide ample control under stress conditions without the interference that is inherent with a wide safety. This is without a doubt one of the finest concealed combat safeties. Minor fitting required.

6BN

In stock

$31.95

Wilson Combat Beretta 92G Centurion Tactical, 9mm - Standard Trigger

Wilson Combat Beretta 92G Centurion Tactical, 9mm - Standard Trigger

The Beretta 92 Series has served with distinction as the military sidearm for over three decades. Rugged and reliable, the 92 series are known for superior accuracy and ergonomics. The Wilson Combat 92G Brigadier Centurion model has been optimized for high volume shooting. Features include ambidextrous steel decocking-only levers, enhanced Centurion slide, modified M9A1 style checkered frame with accessory rail and rounded trigger guard, and "Elite" style match grade stainless barrel with recessed target crown. Additional features include a "D" hammer spring for lightened trigger pulls, oversized magazine release, skeletonized Elite II hammer, fluted steel guide rod, G10 grips, Trijicon dovetail tritium front sight and Wilson Combat black rear u-notch sight for fast front sight acquisition. Comes with case, and two 17RD and one 20RD sand resistant magazines.

BER-92CT-9-NO-AT

In stock

$1250.00

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - STAINLESS

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - STAINLESS

Wilson Combat Drop-in Beavertail Safety for Colt pistols that do not require cutting the frame. This high ride grip safety provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties. To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer. Due to variations from one pistol to the next, slight modifications to the beavertails trigger engagement area may be required for proper operation. Stainless steel.

429SG

In stock

$37.95

Wilson Combat High Ride Beavertail Safety - 1911 - STAINLESS

Wilson Combat High Ride Beavertail Safety - 1911 - STAINLESS

The Wilson Combat High Ride Beavertail Grip Safety will improve the comfort and controllability of your 1911 Auto. This is accomplished by allowing the shooting hand to be positioned closer to the plane of the bore while spreading the recoil over a broad rounded surface. The bottom of the High Ride Safety features our raised Posi-Release tab which assures positive grip safety disengagement while serving as a grip memory point each time you draw your pistol. The top of the High Ride Safety has a hammer pocket which makes the pistol more snag-free by allowing a commander or bobbed spur hammer to sit down in the beavertail when cocked. Frame modification required. Installation of a Wilson High Ride (#298) beavertail requires cutting the frame to fit the beavertail. Our beavertail fitting jig mounts to the hammer and thumb safety pin holes to serve as a filing guide to help prevent over cutting of the frame. Once this cut is made, only a few thousandths remain for final fitting to a perfect match. Complete instructions included on the use of the fitting jig and how to properly install a Wilson's beavertail grip safety.

298S

In stock

$39.95

Wilson Combat Match-Grade Barrel Bushing, 1911 Govt - STAINLESS

Wilson Combat Match-Grade Barrel Bushing, 1911 Govt - STAINLESS

Wilson Combat Match-Grade Barrel Bushings are produced from top- quality steel for maximum reliability and wear. Our Stainless Steel bushings #29S & #29SC are designed for .580 O.D. barrels and require only minor fitting. The #29B Blued bushing is a pistolsmith part with considerably more material on the O.D. and I.D. for use with smaller barrels or when special situations require additional material.

29S

In stock

$19.95

Wilson Combat  Bullet Proof Extractor - SERIES 70 - STAINLESS - .38 SUPER/9MM

Wilson Combat Bullet Proof Extractor - SERIES 70 - STAINLESS - .38 SUPER/9MM

The Wilson Combat 1911 Bullet Proof Extractor Is machined from steel bar stock making sure optimal dimensions are maintained and corners radiused for extended life and smooth feeding. The result is an extractor that holds its tension longer and outlives standard factory parts many times over. This is a drop-in part for many guns and may require minor tension adjustment in others.

415S70S

In stock

$33.95

Wilson Combat  Extended Slide Stop - 1911 - STAINLESS

Wilson Combat Extended Slide Stop - 1911 - STAINLESS

Many 1911 shooters prefer to drop the slide with their right thumb. The Wilson Combat Extended Slide Stop allows the right thumb to actuate the slide release with minimal grip change which can save valuable time. Only available for .45 ACP. Minor fitting may be required. Stainless steel.

WC7S

In stock

$35.95

Wilson Combat #47 1911 Govt .45 ACP 7rd magazine

Wilson Combat #47 1911 Govt .45 ACP 7rd magazine

Government Model 1911 7RD magazine, .45ACP. The body is made from durable stainless steel for a lifetime of service. Backed by Wilson Combat's no risk, replacement policy.

47

In stock

$31.95

Wilson Combat #47DC 1911 Govt .45 ACP 8rd magazine - Stainless

Wilson Combat #47DC 1911 Govt .45 ACP 8rd magazine - Stainless

This Low Profile 8 Round 1911 magazine provides an edge in concealment with 8+1 rounds and it's low profile removable steel base pad.

47DC

In stock

$36.95

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - BLUE

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - BLUE

The Wilson Combat drop-in high ride beavertail grip safety fits your Colt pistol without cutting the frame. This provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties. To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer. Due to variations from one pistol to the next, slight modifications to the beavertails trigger engagement area may be required for proper operation. Blued Finish.

429BG

In stock

$35.95

Wilson Combat Firing Pin Return Spring, Extra Power, 1911

Wilson Combat Firing Pin Return Spring, Extra Power, 1911

Extra Power Firing Pin Return Spring for the 1911 handgun. Fits All Models.

WC26

In stock

$2.95

Wilson Combat Skeletonized Ultralight Hammer - 1911 - BLUE

Wilson Combat Skeletonized Ultralight Hammer - 1911 - BLUE

The Skeletonized Ultralight Hammer from Wilson Combat is fully CNC machined from solid S-7 tool steel bar stock and heat treated to R/C 48-52 to produce the finest 1911 hammer on the market. This hammer features a skeletonized spur for minimum weight and fastest possible lock time, hammer hooks cut to .020" with 8 RMS ground finish and narrow half-cock notch to prevent sear nose damage. Combine with our Ultralight Trigger (#WC190) and Deluxe A-2 Sear (#WC314) for the ultimate trigger job. Minor fitting required.

337B

In stock

$49.95

Wilson Combat Ultralight Match Trigger - 1911

Wilson Combat Ultralight Match Trigger - 1911

The Ultralight Match Trigger is used by the Wilson Custom Shop to produce some of the world's finest 1911 Autos. Weighing in at a little over 90 grains, the Ultralight trigger is an absolute necessity for a light yet safe competition trigger job or to produce the ultra-crisp trigger pull that Wilson "Tactical" pistols are noted for. The pad is machined from aircraft grade aluminum with a serrated front and our trademark three hole skeletonized design. It is then given a low luster silver matte finish. The bow is hardened stainless steel which has been polished to reduce bow to frame friction. Features an adjustable overtravel screw for precision overtravel adjustment. This is our finest long adjustable match trigger. Minor fitting required.

190

In stock

$34.95

Wilson Combat #47OX 1911 Officers .45 ACP 7rd magazine - Stainless

Wilson Combat #47OX 1911 Officers .45 ACP 7rd magazine - Stainless

Wilson Combat Officers Model 7 round stainless steel 1911 magazine. Designed for compact Officer's Model type 1911's. Will not fit full size of Commander type 1911's.

47OX

In stock

$31.95

Wilson Combat #500 ETM HD/+P 1911 Govt .45 ACP 8rd magazine - Stainless

Wilson Combat #500 ETM HD/+P 1911 Govt .45 ACP 8rd magazine - Stainless

Wilson Combat ETM HD/+P .45ACP magazines feature the exclusive stainless flatwire MAX magazine spring that substantially increases the life of the spring as compared to a normal coiled spring. A true game-changer to the 1911 magazine, the heat-treated MAX flatwire construction never gets stressed or over-compressed like a conventional spring and is guaranteed to never require replacement even after high round counts or daily, extreme duty use. Aluminum base pad.

500A-HD

In stock

$39.95