Wilson Combat

Products

Wilson Combat  Ambidextrous Tactical Thumb Safety - 1911 - STAINLESS

Wilson Combat Ambidextrous Tactical Thumb Safety - 1911 - STAINLESS

The Wilson Combat Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand. This is an essential feature for left handed shooters, but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required. Stainless steel.

192S

Out of stock

$59.95

Out of stock
Wilson Combat  Bullet Proof Firing Pin Stop, .45ACP - Series 80 - BLUE

Wilson Combat Bullet Proof Firing Pin Stop, .45ACP - Series 80 - BLUE

A Bullet Proof® firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a standard firing pin stop. A quality firing pin stop should fit snuggly in place, therefore this part does require minor fitting to your particular pistol for a perfect fit.

399B80

Out of stock

$18.95

Out of stock
Wilson Combat  Tactical Thumb Safety - 1911 - STAINLESS

Wilson Combat Tactical Thumb Safety - 1911 - STAINLESS

Pistols that are used for concealed carry and tactical use must have a narrow profile thumb safety to keep them from being accidentally disengaged and snagging on clothing when drawn. Yet once out of the holster they must be quickly manipulated without failure. The Wilson Combat Tactical Thumb Safety for 1911 pistols is made just for that purpose. The extended lever is serrated to provide ample control under stress conditions without the interference that is inherent with a wide safety. This is without a doubt one of the finest concealed combat safeties and is finished stainless steel. Minor fitting required.

6SN

Out of stock

$33.95

Out of stock
Wilson Combat #47T 1911 Govt .45 ACP 10rd magazine - Stainless

Wilson Combat #47T 1911 Govt .45 ACP 10rd magazine - Stainless

The Wilson Combat #47T is a 10RD 1911 magazine designed for use in all 1911 platform guns featuring an ultra thin .162 inch base pad. Will fit Government and Commander size 1911's.

47T

Out of stock

$37.95

Out of stock
Wilson Combat #500,9C ETM 1911 Officers 9mm 8rd magazine - Stainless

Wilson Combat #500,9C ETM 1911 Officers 9mm 8rd magazine - Stainless

The Wilson Combat 9mm Compact ETM Magazine or Elite Tactical Magazine, chambered in 9mm. A completely new design from the base pad up. Whether used for combat or competition, this is sure to set the new gold standard in 1911 magazines. Will fit Officer's Model and Compact type 9mm models only.

500, 9C

Out of stock

$41.95

Out of stock
Wilson Combat 5" 1911 Match Grade Drop-in Barrel - STAINLESS

Wilson Combat 5" 1911 Match Grade Drop-in Barrel - STAINLESS

The Wilson Combat 1911 "drop-in" barrel is exactly the same as the #33G match barrel, with the critical lock-up contact areas cut to a dimension that provides a good lock-up in most Colt and Springfield pistols*. Due to variations in pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes: Barrel and Bushing.

33D

Out of stock

$189.95

Out of stock
Wilson Combat Border Patrol 12GA. Shotgun, Black Armor Tuff

Wilson Combat Border Patrol 12GA. Shotgun, Black Armor Tuff

The Wilson Combat Border Patrol Model 12ga. has been rigorously tested at the U.S. borders under very demanding conditions. Comes with a 3 inch magnum chamber, 18.5" barrel, and an extended magazine tube and a high visibility follower. For fast target aquisition, this shotgun has a Ghost Ring rear sight and ramped tritium front night sight. Includes a padded soft side carry case.



SBP-A-BLACK

Out of stock

$1189.95

Out of stock
Wilson Combat Classic .45ACP, Long Slide, Cocobolo Grips, Black

Wilson Combat Classic .45ACP, Long Slide, Cocobolo Grips, Black

This Wilson Combat Classic features the 6" long-slide upgrade. Featuring a 6" barrel, adjustable target sights, naked slide, forward cocking serrations, 30LPI checkered front strap and mainspring housing, top slide serrations, black armor-tuff finish, and double diamond cocobolo grips round out this beautiful hand-fitted pistol.

CL-FS-45

Out of stock

$3555.00

Out of stock
Wilson Combat Complete Spring Set - 1911 GOVT

Wilson Combat Complete Spring Set - 1911 GOVT

Complete 1911 Spring Set, Government Model, .45 ACP, 18 1/2# Recoil Spring. Includes: Sear Spring, Heavy-Duty Recoil Spring, Extra-Power Firing Pin Return Spring, Plunger Spring, Magazine Catch Spring and Mainspring.

316G

Out of stock

$15.95

Out of stock
Wilson Combat CQB .45ACP, G10 Grips

Wilson Combat CQB .45ACP, G10 Grips

Wilson Combat CQB .45ACP. Comes with (2) magazines and case.

UPGRADES:

  • Black Armor-Tuff Finish
  • Single Side Safety
  • Forward Cocking Serrations
  • Fiber Optic Front Sight
  • Black U-Notch Rear Sight
  • G10 Starburst Grips

CQB-FS-45

Out of stock

$2539.99

Out of stock
Wilson Combat CQB Commander, .45ACP, G10 Grips, Ambi Safety, Black

Wilson Combat CQB Commander, .45ACP, G10 Grips, Ambi Safety, Black

Wilson Combat CQB Commander, .45ACP, G10 Grips, Ambi Safety, Black. Comes with (2) magazines and case.

UPGRADES:

  • Professional-Size Carbon Steel Round-Butt Frame
  • 30 LPI High-Cut Checkered Frontstrap
  • Contoured Magazine Well
  • Concealment Bullet Proof® Beavertail Grip Safety and Hammer
  • Tactical Bullet Proof® Ambidextrous Thumb Safety
  • 3½# – 4½# Crisp Trigger Pull with Medium-Length Pad
  • Bullet Proof® Magazine Release
  • G10 Starburst Pattern, Beveled Bottom, Black Grips with Pewter Medallions
  • Countersunk Slide Stop
  • 4.25” Carbon Steel Slide
  • Heavy Machine Chamfer on Bottom of Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • 4.25” Stainless Match-Grade Barrel and Bushing, Flush-Cut Reverse Crown
  • Fluted Chamber
  • 30 LPI Slide Top Serrations
  • 40 LPI Serrated Rear of Slide
  • Ball Cuts

CQB-COMM-45-BLK

Out of stock

$3379.00

Out of stock
Wilson Combat CQB Commander, 9mm, G10 Grips, Black

Wilson Combat CQB Commander, 9mm, G10 Grips, Black

Wilson Combat CQB Commander, 9mm, G10 Grips, Black. Comes with (2) magazines and case.

UPGRADES:

  • Professional-Size Carbon Steel Round-Butt Frame
  • 30 LPI High-Cut Checkered Frontstrap
  • Contoured Magazine Well
  • Concealment Bullet Proof® Beavertail Grip Safety and Hammer
  • Tactical Bullet Proof® Thumb Safety
  • 3½# – 4½# Crisp Trigger Pull with Medium-Length Pad
  • Bullet Proof® Magazine Release
  • G10 Starburst Pattern, Beveled Bottom, Black Grips with Pewter Medallions
  • Countersunk Slide Stop
  • 4.25” Carbon Steel Slide
  • Heavy Machine Chamfer on Bottom of Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • 4.25” Stainless Match-Grade Barrel and Bushing, Flush-Cut Reverse Crown
  • Fluted Chamber
  • 30 LPI Slide Top Serrations
  • 40 LPI Serrated Rear of Slide
  • Ball Cuts

CQB-COMM-9-BLK

Out of stock

$3394.00

Out of stock
Wilson Combat CQB LEGACY, Cocobolo Grips, No Front Cocking Serrations, Blued

Wilson Combat CQB LEGACY, Cocobolo Grips, No Front Cocking Serrations, Blued

Exclusively available from Top Gun Supply, the .45ACP CQB Legacy captures the nostalgia of years past with highly polished flats, no front cocking serrations and rich, dark bluing. Comes with beautiful double diamond Cocobolo wood grips, single side thumb safety. The front and rear straps are checkered and the rear of the slide is serrated along with the rear sight. Yellow rear and green front night sights are included.

CQB-LEGACY

Out of stock

$3539.95

Out of stock
Wilson Combat CQB Tactical LE, Rail, 9mm, G10 Grips, Black/OD Green

Wilson Combat CQB Tactical LE, Rail, 9mm, G10 Grips, Black/OD Green

Wilson Combat CQB Tactical LE, Rail, 9mm, G10 Grips, Black/OD Green. Comes with (2) magazines and case.

UPGRADES:

  • Full-Size Stainless Steel Frame
  • Integral Light Rail
  • 30 LPI High-Cut Checkered Frontstrap
  • High-Ride Bullet Proof® Beavertail Grip Safety
  • Bullet Proof® Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull
  • Bullet Proof® Magazine Well
  • G10 Diagonal Flat-Bottom Grips
  • 5″ Carbon Steel Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • 5″ Stainless Match-Grade Bull Barrel, Hand Fit

CQBTLE-9-BLK-ODG

Out of stock

$2949.00

Out of stock
Wilson Combat EDC X9, 9mm

Wilson Combat EDC X9, 9mm

Redefining the defensive handgun market, the Wilson Combat EDC X9 features all the ergonomics and controls of the 1911 mated to an aluminum high capacity X-Frame. Combining the accuracy, ergonomics and trigger pull of the classic 1911 design, with enhanced reliability, concealable, and high capacity performance. Similar in dimensions to the Glock 19, the EDC X9 features the X-Tac tread pattern on the front and backstrap for a comfortable, yet aggressive grip in all conditions.

The X-frame is a 15-round, high capacity 9mm 1911 frame that is similar in size to a traditional compact, single stack 1911. The screwless X-frame design uses hammer spring tension to keep the aggressive traction Wilson/VZ G-10 starburst pattern grips securely in place. Coupled with Wilson's new ERS (Enhanced Reliability System) which features a robust spring-loaded external extractor that improves extraction in all conditions with all types of ammunition; A match grade, fluted barrel with single lug geometry to reduce cycling friction, enhance slide velocity, and improve feed reliability; Removal of the frame rails around the mag opening to further reduce friction and promote function in adverse shooting environments. The EDC X9 features all the positive attributes of the 1911, with reduced maintenance and modern day high capacity.

UPGRADES:

  • High-Capacity Compact Size Aluminum X-Frame with Reliability Enhanced Frame Rails
  • Unique X-TAC Frontstrap/Mainspring Housing Treatment
  • Concealment Bullet Proof® Hammer
  • Bullet Proof® Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull with Medium Length Pad
  • Bullet Proof® Magazine Release
  • Black G10 Aggressive Starburst Grips with Pewter Medallions
  • 4” Stainless Steel Tri-Top Slide with External Extractor
  • Unique X-TAC Rear & Front Cocking Serration Treatment on Slide
  • Heavy Machine Chamfer on Bottom of Slide
  • Elevation Adjustable Tactical Battlesight with Fiber Optic Front Sight with 4-40 Hex Head Cap Screw
  • 4” Stainless Cone Barrel with Reliability Enhancing Lock-up, Flush Cut Reverse Crown
  • Fluted Chamber
  • Fluted Barrel
  • 30 LPI Slide Top Serrations
  • 40 LPI Serrated Rear of Slide
  • Carry Cuts/Ball Endmill Cuts
  • 2 15-Round Capacity Magazines

EDC-X9

Out of stock

$2895.00

Out of stock
Wilson Combat EDC X9, Rail, 9mm

Wilson Combat EDC X9, Rail, 9mm

Redefining the defensive handgun market, the Wilson Combat EDC X9 with Lightrail features all the ergonomics and controls of the 1911 mated to an aluminum high capacity X-Frame. Combining the accuracy, ergonomics and trigger pull of the classic 1911 design, with enhanced reliability, concealable, and high capacity performance. Similar in dimensions to the Glock 19, the EDC X9 features the X-Tac tread pattern on the front and backstrap for a comfortable, yet aggressive grip in all conditions.

The X-frame is a 15-round, high capacity 9mm 1911 frame that is similar in size to a traditional compact, single stack 1911. The screwless X-frame design uses hammer spring tension to keep the aggressive traction Wilson/VZ G-10 starburst pattern grips securely in place. Coupled with Wilson's new ERS (Enhanced Reliability System) which features a robust spring-loaded external extractor that improves extraction in all conditions with all types of ammunition; A match grade, fluted barrel with single lug geometry to reduce cycling friction, enhance slide velocity, and improve feed reliability; Removal of the frame rails around the mag opening to further reduce friction and promote function in adverse shooting environments. The EDC X9 features all the positive attributes of the 1911, with reduced maintenance and modern day high capacity.


UPGRADES:

  • High-Capacity Compact Size Aluminum X-Frame with Reliability Enhanced Frame Rails
  • Unique X-TAC Frontstrap/Mainspring Housing Treatment
  • Concealment Bullet Proof® Hammer
  • Bullet Proof® Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull with Medium Length Pad
  • Bullet Proof® Magazine Release
  • Black G10 Aggressive Starburst Grips with Pewter Medallions
  • 4” Stainless Steel Tri-Top Slide with External Extractor
  • Unique X-TAC Rear & Front Cocking Serration Treatment on Slide
  • Heavy Machine Chamfer on Bottom of Slide
  • Elevation Adjustable Tactical Battlesight with Fiber Optic Front Sight with 4-40 Hex Head Cap Screw
  • 4” Stainless Cone Barrel with Reliability Enhancing Lock-up, Flush Cut Reverse Crown
  • Fluted Chamber
  • Fluted Barrel
  • 30 LPI Slide Top Serrations
  • 40 LPI Serrated Rear of Slide
  • Carry Cuts/Ball Endmill Cuts
  • 2 15-Round Capacity Magazines

EDC-X9-RAIL

Out of stock

$2895.00

Out of stock
Wilson Combat Professional, 9mm, G10 Grips, Magwell, Ambi Safety, Stainless

Wilson Combat Professional, 9mm, G10 Grips, Magwell, Ambi Safety, Stainless

Wilson Combat Professional, 9mm, G10 Grips, Magwell, Ambi Safety, Stainless. Comes with (2) magazines and case.

UPGRADES:

  • Professional-Size Stainless Steel Frame
  • Matte Bead Blast with Polished Flats
  • Front Cocking Serrations
  • 30 LPI Top Slide Serrations
  • 40 LPI Rear Slide Serrations
  • 30 LPI High-Cut Checkered Frontstrap
  • High-Ride Bullet Proof® Beavertail Grip Safety
  • Bullet Proof® Ambidextrous Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull
  • Bullet Proof® One Piece Round Butt Magazine Well
  • G10 Starburst Grips with Sterling Silver Medallion
  • 4″ Stainless Steel Slide
  • Black U-Notch Battlesight with Tritium Front Sight
  • 4″ Stainless Match-Grade Cone Barrel, Hand Fit

PRO-9-STS

Out of stock

$3866.00

Out of stock
Wilson Combat Speed-Chute Govt/Comm, Flat - BLUE

Wilson Combat Speed-Chute Govt/Comm, Flat - BLUE

The Wilson Combat Speed-Chute is comprised of two pieces and held firmly together with the mainspring housing pin through the frame. The mainspring housing is checkered for a positive grip. The magazine well makes magazine reloads positive and quick! If you preferred to carry you 1911 without the magazine well, you can just pop out the mainspring housing pin, remove the mag well and re-install the pin. It is very easily changed for range use, competitive shooting or concealed carry. Your choice! The Speed Chute is designed for full size Government models and Commander sized 1911 frames. Blued finish.

366BF

Out of stock

$84.95

Out of stock