Wilson Combat

Products

Wilson Combat Tactical Magazine Release - 1911 - BLUE

Wilson Combat Tactical Magazine Release - 1911 - BLUE

The Wilson Combat Tactical Magazine Release extends slightly further than a factory release approximately 1/16 of an inch further than standard. This magazine release provides extra length for positive magazine changes without being too long for carry. Magazine Release lock and spring not included.

31T

Out of stock

$24.95

Out of stock
Wilson Combat  Ambidextrous Tactical Thumb Safety - 1911 - STAINLESS

Wilson Combat Ambidextrous Tactical Thumb Safety - 1911 - STAINLESS

The Wilson Combat Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand. This is an essential feature for left handed shooters, but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required. Stainless steel.

192S

In stock

$59.95

Wilson Combat  Bullet Proof Sear Spring - 1911

Wilson Combat Bullet Proof Sear Spring - 1911

Producing a quality sear spring is quite tricky since it must be bent for custom tuning yet maintain a constant tension once set. A Bullet Proof Sear Spring has the perfect balance of materials and temper to allow the pistolsmith the flexibility necessary to do a top quality trigger job which will continue to maintain its tension long after factory springs would have died. For a Bullet Proof trigger job, get a Bullet Proof Sear Spring. Fits full size Govt, Commander, Officer Model and Compact model 1911's and variants.

417

In stock

$6.95

Wilson Combat  Extended Slide Stop - 1911 - STAINLESS

Wilson Combat Extended Slide Stop - 1911 - STAINLESS

Many 1911 shooters prefer to drop the slide with their right thumb. The Wilson Combat Extended Slide Stop allows the right thumb to actuate the slide release with minimal grip change which can save valuable time. Only available for .45 ACP. Minor fitting may be required. Stainless steel.

WC7S

In stock

$35.95

Wilson Combat  Tactical Thumb Safety - 1911 - STAINLESS

Wilson Combat Tactical Thumb Safety - 1911 - STAINLESS

Pistols that are used for concealed carry and tactical use must have a narrow profile thumb safety to keep them from being accidentally disengaged and snagging on clothing when drawn. Yet once out of the holster they must be quickly manipulated without failure. The Wilson Combat Tactical Thumb Safety for 1911 pistols is made just for that purpose. The extended lever is serrated to provide ample control under stress conditions without the interference that is inherent with a wide safety. This is without a doubt one of the finest concealed combat safeties and is finished stainless steel. Minor fitting required.

6SN

In stock

$33.95

Wilson Combat 1911 Beavertail Fitting Jig

Wilson Combat 1911 Beavertail Fitting Jig

The Wilson Combat Jig is used for Installation of a Wilson High Ride (#WC298) beavertail which requires cutting the frame to fit the beavertail. The beavertail fitting jig mounts to the hammer and thumb safety pin holes to serve as a filing guide to help prevent over cutting of the frame. Once this cut is made, only a few thousandths remain for final fitting to a perfect match. Complete instructions included on the use of the fitting jig and how to properly install a Wilson Combat 1911 beavertail grip safety.

402

In stock

$24.95

Wilson Combat Checkered Mainspring Housing, Govt/Comm, Flat - STAINLESS

Wilson Combat Checkered Mainspring Housing, Govt/Comm, Flat - STAINLESS

The Wilson Combat Checkered Mainspring Housing not only looks great, but it a huge improvement providing a positive grip. Installs easily and is made from steel for high durability. Fits Government and Commander sized 1911 pistols. Stainless steel finish.

92SF

In stock

$48.95

Wilson Combat Checkered Mainspring Housing, Govt/Comm, V-Grip - STAINLESS

Wilson Combat Checkered Mainspring Housing, Govt/Comm, V-Grip - STAINLESS

The Wilson Combat Checkered V-Grip Mainspring housing is shaped to naturally push your hand higher into the grip safety. This grip position provides positive results for many shooters by decreasing time between shots and faster target acquisition. The checkering provides for a non-slip grip to the palm of your hand. Fits Govt. and Commander 1911 models. Stainless steel finish.

92SV

In stock

$47.95

Wilson Combat CQB Compact, 9mm, G10 Grips, Black

Wilson Combat CQB Compact, 9mm, G10 Grips, Black

Wilson Combat CQB Compact, 9mm, G10 Grips, Black. Comes with (2) magazines and case.

UPGRADES:

  • Compact Carbon Steel Frame
  • 30 LPI High-Cut Checkered Frontstrap
  • High-Ride Bullet Proof® Beavertail Grip Safety
  • Bullet Proof® Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull
  • Contoured Magazine Well
  • G10 Starburst Grips
  • 4″ Carbon Steel Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • 4″ Stainless Match-Grade Cone Barrel, Hand Fit

CQB-COMP-9-BLK

In stock

$2750.00

Wilson Combat Drop-in Beavertail Safety - COLT COMMANDER, OFFICER'S MODEL 1911 - STAINLESS

Wilson Combat Drop-in Beavertail Safety - COLT COMMANDER, OFFICER'S MODEL 1911 - STAINLESS

The Wilson Combat Drop-in Beavertail Safety provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties. To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer. Due to variations from one pistol to the next, slight modifications to the beavertails trigger engagement area may be required for proper operation. Stainless steel.

429SC

In stock

$37.95

Wilson Combat Heavy Duty Recoil Spring, Govt - 16LB

Wilson Combat Heavy Duty Recoil Spring, Govt - 16LB

Wilson Combat 1911 Recoil Spring for Govt. Model, 16 LB.

10G16

In stock

$6.95

Wilson Combat Professional Protector II, .45ACP, Rail, G10 Grips, Black

Wilson Combat Professional Protector II, .45ACP, Rail, G10 Grips, Black

Wilson Combat Professional Protector II, .45ACP, Rail, G10 Grips, Black. Comes with (2) magazines and case.

UPGRADES:

  • Integral Light-Rail Steel Frame
  • 30 LPI High-Cut Checkered Frontstrap
  • Bullet Proof® Round Butt Magazine Well
  • High-Ride Bullet Proof® Beavertail Grip Safety
  • Tactical Bullet Proof® Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull with Medium-Length Pad
  • Bullet Proof® Magazine Release
  • G10 Starburst Grips with Black Medallions
  • Countersunk Slide Stop
  • Heavy Machine Chamfer on Bottom of Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • Fluted Chamber
  • Fluted Barrel
  • 30 LPI Slide Top Serrations
  • 40 LPI Serrated Rear of Slide
  • Front Cocking Serrations and Carry Cuts
  • 4″ Carbon Steel Slide
  • 4″ Stainless Match-Grade Cone Barrel, Flush-Cut Reverse Crowned

PRO-PT2-45-BLK

In stock

$3549.00

Wilson Combat Professional, 9mm, G10 Grips, Ambi Safety, Black

Wilson Combat Professional, 9mm, G10 Grips, Ambi Safety, Black

Wilson Combat Professional, 9mm, G10 Grips, Ambi, Black. Comes with (2) magazines and case.

UPGRADES:

  • Professional-Size Carbon Steel Frame
  • 30 LPI High-Cut Checkered Frontstrap
  • High-Ride Bullet Proof® Beavertail Grip Safety
  • Bullet Proof® Ambidextrous Thumb Safety
  • 3 ½# – 4 ½# Crisp Trigger Pull
  • Contoured Magazine Well
  • G10 Starburst Grips
  • 4″ Carbon Steel Slide
  • Black U-Notch Battlesight with Fiber Optic Front Sight
  • 4″ Stainless Match-Grade Cone Barrel, Hand Fit

PRO-9-BLK

In stock

$2855.00

Wilson Combat Ultralight Carry Commander 45 ACP

Wilson Combat Ultralight Carry Commander 45 ACP

The Wilson Combat Ultralight Carry Commander is a light weight, but serious defensive carry handgun. Featuring an aluminum alloy frame that is first hard coat anodized and then finished in Wilson's proprietary Armor-Tuff finish. This pistol is chambered in .45ACP with a 4.25" Commander length reverse crown barrel and chamber fluting. The round butt cut on the frame increases comfort while lowering the profile for concealment. The Wilson Combat ULC has just been released and is sure to be coveted by 1911 enthusiasts.

ULC-COM-45

In stock

$3825.00

Wilson Combat Ultralight Carry Commander 9mm

Wilson Combat Ultralight Carry Commander 9mm

The Wilson Combat Ultralight Carry Commander is a light weight, but serious defensive carry handgun. Featuring an aluminum alloy frame that is first hard coat anodized and then finished in Wilson's proprietary Armor-Tuff finish. This pistol is chambered in 9mm with a 4.25" Commander length reverse crown barrel and chamber fluting. The round butt cut on the frame increases comfort while lowering the profile for concealment. The Wilson Combat ULC has just been released and is sure to be coveted by 1911 enthusiasts.

ULC-COM-9

In stock

$3935.00

Wilson Combat  Bullet Proof Extractor - SERIES 80 - BLUE - .45ACP

Wilson Combat Bullet Proof Extractor - SERIES 80 - BLUE - .45ACP

The Wilson Combat Bullet Proof Extractor for Series 80 .45ACP pistols. Machined from steel bar stock and finished in blue, making sure optimal dimensions are maintained and corners radiused for extended life and smooth feeding. The result is an extractor that holds its tension longer and outlives standard factory parts many times over. This is a drop-in part for many guns and may require minor tension adjustment in others.

41580

In stock

$30.95

Wilson Combat  Bullet Proof Firing Pin, .45ACP - 1911

Wilson Combat Bullet Proof Firing Pin, .45ACP - 1911

Firing pins have been made from a wide variety of materials for a wide variety of applications. The Wilson Combat Bullet Proof Firing Pins claim to fame is that it outlasts all other 1911 firing pins, bar none. When you're after shear reliability that's the most important quality a firing pin could have.

41645

In stock

$14.95

Wilson Combat  Bullet Proof Slide Stop - 1911 - STAINLESS

Wilson Combat Bullet Proof Slide Stop - 1911 - STAINLESS

Wilson Combat 1911 Bullet Proof Slide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability. This is a drop in part requiring no fitting in properly manufactured 1911 Autos. Stainless steel.

414S

In stock

$61.95