Wilson Combat

Products

Wilson Combat  Bullet Proof Extractor - SERIES 80 - BLUE - .45ACP

Wilson Combat Bullet Proof Extractor - SERIES 80 - BLUE - .45ACP

The Wilson Combat Bullet Proof Extractor for Series 80 .45ACP pistols. Machined from steel bar stock and finished in blue, making sure optimal dimensions are maintained and corners radiused for extended life and smooth feeding. The result is an extractor that holds its tension longer and outlives standard factory parts many times over. This is a drop-in part for many guns and may require minor tension adjustment in others.

41580

In stock

$30.95

Wilson Combat  Bullet Proof Firing Pin, .45ACP - 1911

Wilson Combat Bullet Proof Firing Pin, .45ACP - 1911

Firing pins have been made from a wide variety of materials for a wide variety of applications. The Wilson Combat Bullet Proof Firing Pins claim to fame is that it outlasts all other 1911 firing pins, bar none. When you're after shear reliability that's the most important quality a firing pin could have.

41645

In stock

$14.95

Wilson Combat  Bullet Proof Slide Stop - 1911 - BLUE

Wilson Combat Bullet Proof Slide Stop - 1911 - BLUE

Wilson Combat Bullet ProofSlide Stops are fully machined from solid bar stock with extra metal left in critical areas for added durability. This is a drop in part requiring no fitting in properly manufactured 1911 Autos.Blued finish.

414B

In stock

$59.95

Wilson Combat  Extended Wide Thumb Safety - 1911 - STAINLESS

Wilson Combat Extended Wide Thumb Safety - 1911 - STAINLESS

The Wilson Combat 1911 Wide Extended Thumb Safety allows for maximum flexibility. You can custom contour the pad to meet your particular requirements or leave the wide serrated lever unaltered for maximum thumb engagement. Minor fitting required. Stainless steel.

WC6S

In stock

$33.95

Wilson Combat Beretta 92G Centurion Tactical, 9mm

Wilson Combat Beretta 92G Centurion Tactical, 9mm

The Wilson Combat 92G Centurion Tactical with a 4.25" slide, is upgraded to include the Beretta Action Tune by Wilson. The Beretta 92 Series has served with distinction as the military sidearm for over three decades. Rugged and reliable, the 92 series are known for superior accuracy and ergonomics. The Wilson Combat 92G Brigadier Centurion model has been optimized for high volume shooting. Features include ambidextrous steel decocking-only levers, enhanced Centurion slide, modified M9A1 style checkered frame with accessory rail and rounded trigger guard, and "Elite" style match grade stainless barrel with recessed target crown. Additional features include a "D" hammer spring for lightened trigger pulls, oversized magazine release, skeletonized Elite II hammer, fluted steel guide rod, G10 grips, Trijicon dovetail tritium front sight and Wilson Combat black rear u-notch sight for fast front sight acquisition. Comes with case, and two 17RD and one 20RD sand resistant magazines.



BER-92CT-9

In stock

$1360.00

Wilson Combat Checkered Mainspring Housing, Govt/Comm, Flat - BLUE

Wilson Combat Checkered Mainspring Housing, Govt/Comm, Flat - BLUE

The Wilson Combat Checkered Mainspring Housing not only looks great, but it a huge improvement providing a positive grip. Installs easily and is made from steel for high durability. Fits Government and Commander sized 1911 pistols. Blued finish.

92BF

In stock

$46.95

Wilson Combat Drop-in Beavertail Safety - COLT COMMANDER, OFFICER'S MODEL 1911 - BLUE

Wilson Combat Drop-in Beavertail Safety - COLT COMMANDER, OFFICER'S MODEL 1911 - BLUE

Now you can have a Wilson Combat high ride beavertail grip safety on your Colt pistol without cutting the frame. This provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties. To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer. Due to variations from one pistol to the next, slight modifications to the beavertails trigger engagement area may be required for proper operation.

429BC

In stock

$35.95

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - STAINLESS

Wilson Combat Drop-in Beavertail Safety - COLT GOVT 1911 - STAINLESS

Wilson Combat Drop-in Beavertail Safety for Colt pistols that do not require cutting the frame. This high ride grip safety provides better control of your pistol while eliminating the discomfort and hammer bite that are possible with stock grip safeties. To return your gun to stock condition, simply re-install the factory part. The drop-in safety is designed to work with a commander style hammer or a bobbed spur hammer. Due to variations from one pistol to the next, slight modifications to the beavertails trigger engagement area may be required for proper operation. Stainless steel.

429SG

In stock

$37.95

Wilson Combat Machined Bar Stock Plunger Tube - 1911 - STAINLESS

Wilson Combat Machined Bar Stock Plunger Tube - 1911 - STAINLESS

Wilson Combat Machined Bar Stock Plunger Tube for most 1911 platform pistols. Stainless steel finish.

458S

In stock

$18.95

Wilson Combat Tactical Magazine Release - 1911 - STAINLESS

Wilson Combat Tactical Magazine Release - 1911 - STAINLESS

Wilson Combat Tactical Magazine Release extends 1/16" beyond the standard factory release. This magazine release provides extra length for positive magazine changes without being too long for carry. Magazine Release lock and spring not included. Stainless steel.

31TS

In stock

$26.95

Wilson Combat  Ambidextrous Tactical Thumb Safety - 1911 - BLUE

Wilson Combat Ambidextrous Tactical Thumb Safety - 1911 - BLUE

The Wilson Combat Tactical Ambidextrous Thumb Safety will allow your 1911 Auto to be operated with either the right or left hand. This is an essential feature for left handed shooters, but has many other uses including combat competition. Both levers are extended and serrated with the left side being slightly wider than the right. Minor fitting required. Blued finish.

192B

In stock

$58.95

Wilson Combat  Bullet Proof Extractor - SERIES 70 & 80 - BLUE - .38 SUPER/9MM

Wilson Combat Bullet Proof Extractor - SERIES 70 & 80 - BLUE - .38 SUPER/9MM

Wilson Combat Bullet Proof Extractor for Series 70 and Series 80 1911 handguns chambered in .38 Super and 9mm. Machined from steel bar stock making sure optimal dimensions are maintained and corners radiused for extended life and smooth feeding. The result is an extractor that holds its tension longer and outlives standard factory parts many times over. This is a drop-in part for many guns and may require minor tension adjustment in others.

415S80

In stock

$30.95

Wilson Combat Beretta 92G Brigadier Tactical, 9mm

Wilson Combat Beretta 92G Brigadier Tactical, 9mm

New from Wilson Combat, the 92G Brigadier Tactical. Upgraded to include the Beretta Action Tune by Wilson. The Beretta 92 Series has served with distinction as the military sidearm for over three decades. Rugged and reliable, the 92 series are known for superior accuracy and ergonomics. The Wilson Combat 92G Brigadier Tactical model has been optimized for high volume shooting. Features include ambidextrous steel decocking-only levers, enhanced Brigadier slide, modified M9A1 style checkered frame with accessory rail and rounded trigger guard, and "Elite" style match grade stainless barrel with recessed target crown. Additional features include a "D" hammer spring for lightened trigger pulls, oversized magazine release, skeletonized Elite II hammer, lanyard loop, fluted steel guide rod, G10 grips, Trijicon dovetail tritium front sight and Wilson Combat black rear u-notch sight for fast front sight acquisition. Comes with case, and three 15RD sand resistant magazines.



BER-92BRIG-9

In stock

$1305.00

Wilson Combat Heavy Duty Recoil Spring, Govt - 17LB

Wilson Combat Heavy Duty Recoil Spring, Govt - 17LB

Recoil Spring for Govt. Model, 17 LB.

10G17

In stock

$6.95

Wilson Combat High Ride Beavertail Safety - 1911 - STAINLESS

Wilson Combat High Ride Beavertail Safety - 1911 - STAINLESS

The Wilson Combat High Ride Beavertail Grip Safety will improve the comfort and controllability of your 1911 Auto. This is accomplished by allowing the shooting hand to be positioned closer to the plane of the bore while spreading the recoil over a broad rounded surface. The bottom of the High Ride Safety features our raised Posi-Release tab which assures positive grip safety disengagement while serving as a grip memory point each time you draw your pistol. The top of the High Ride Safety has a hammer pocket which makes the pistol more snag-free by allowing a commander or bobbed spur hammer to sit down in the beavertail when cocked. Frame modification required. Installation of a Wilson High Ride (#298) beavertail requires cutting the frame to fit the beavertail. Our beavertail fitting jig mounts to the hammer and thumb safety pin holes to serve as a filing guide to help prevent over cutting of the frame. Once this cut is made, only a few thousandths remain for final fitting to a perfect match. Complete instructions included on the use of the fitting jig and how to properly install a Wilson's beavertail grip safety.

298S

In stock

$39.95

Wilson Combat Magazine Catch Lock - 1911 - BLUE

Wilson Combat Magazine Catch Lock - 1911 - BLUE

Wilson Combat Magazine Catch Lock for all 1911 Magazine releases/catches. Blue finish.

R15B

In stock

$2.95

Wilson Combat Match-Grade Barrel Bushing, 1911 Govt - STAINLESS

Wilson Combat Match-Grade Barrel Bushing, 1911 Govt - STAINLESS

Wilson Combat Match-Grade Barrel Bushings are produced from top- quality steel for maximum reliability and wear. Our Stainless Steel bushings #29S & #29SC are designed for .580 O.D. barrels and require only minor fitting. The #29B Blued bushing is a pistolsmith part with considerably more material on the O.D. and I.D. for use with smaller barrels or when special situations require additional material.

29S

In stock

$19.95

Wilson Combat  Bullet Proof Extractor - SERIES 70 - STAINLESS - .38 SUPER/9MM

Wilson Combat Bullet Proof Extractor - SERIES 70 - STAINLESS - .38 SUPER/9MM

The Wilson Combat 1911 Bullet Proof Extractor Is machined from steel bar stock making sure optimal dimensions are maintained and corners radiused for extended life and smooth feeding. The result is an extractor that holds its tension longer and outlives standard factory parts many times over. This is a drop-in part for many guns and may require minor tension adjustment in others.

415S70S

In stock

$33.95