SUPPRESSORS
Shop by:
 More
|
Products
Energetic Armament Ferox Suppressor, 5.56mm 1/2x28 Black Nitride
|
The Ferox is engineered to be ultra-strong without sacrificing durability. Developed specifically for 5.56mm platforms; particularly for short and mid barrel lengths optimizing low back pressure and excellent sounds suppression. The Ferox ships with a removable 1/2x28 direct thread adapter and is compatible with all industry standard 1.375x24 HUB or Bravo style quick-disconnect mounting systems.
|
EA13
In stock
$699.99
Gemtech Lunar 45 Suppressor
|
The Gemtech Lunar-45 is the culmination of decades of silencer innovation. It is a light and quiet modular 45 caliber suppressor available that is able to be completely taken apart and cleaned. The Lunar-45 is crafted from military grade aluminum and titanium for the utmost in durability and strength. It comes with a .578"-28 tpi piston. |
12126
In stock
$744.95
Griffin Armament Dual-Lok PSR Suppressor, 7.62mm 5/8x24
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados.
|
GADLPSR762-W
In stock
$1101.00
Griffin Armament Optimus 6 Suppressor, 5.56mm/6mm, Hub
|
The Optimus® 6 is a 6mm bore additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over “traditional” suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market.
The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP6UM-W
In stock
$599.95
Otter Creek Infinity, 7.62 - BLK
|
Infinity — We decided to call this project Infinity early on because we wanted this to be a suppressor that will last you forever, you can pass down to your grandchildren and it last them forever too. Also because of it’s adjustability and ability to be configured to any host you have. It’s also marks our entry into the low back pressure market. Notice I didn’t say no back pressure, I said lowER back pressure. We wanted this suppressor to straddle the line of suppressors with zero back pressure that sound like a pipe bomb and suppressors with high back pressure that sound great. There’s no free lunch when it comes to sound suppression. You either have a suppressor that’s loud with zero gas to the face or you have a suppressor that’s quiet with some uncomfortable gas to the face, it just is what it is. We wanted a suppressor that could ride the middle ground line and venture to both sides of the line depending on what the user wanted. So let’s cut through the bull shit and get down to the nitty gritty of what this suppressor does and what makes it unique. We knew we wanted it to be 7.62 bore with changeable end caps. We knew we wanted it to have great 7.62 performance but let’s not kid ourselves, 99% of users buying a 7.62 bore suppressor are using it on 5.56 most of the time. So the 5.56 performance also had to be on point. We developed the general sound profile using 7.62 and then further dialed it in and refined it using 5.56 – we made over 100 prototypes in almost 2 years of testing finding just the right combination that does just as good on 5.56 as an actual 5.56 bore suppressor while still offering great 7.62 performance AND works well being vented or unvented. Included:
|
INF762
In stock
$1250.00
Radical Defense LS3 Ti Rifle Suppressor 30 Cal, 5/8x24
|
The RD LS3 Suppressor is engineered for shooters who demand maximum control, minimal signature, and uncompromising reliability. Optimized for .300 Blackout systems and bolt-action precision rifles, the LS3 delivers exceptional sound reduction, recoil management, and long-term durability in a compact, mission-ready package. Designed with RD’s proprietary Breathable Technology®, the LS3 actively reduces blowback and back pressure—ensuring smooth cycling and stable performance, even during rapid fire on semi-auto platforms or repeated shots from suppressed bolt guns. The result: tighter shot groups, reduced shooter fatigue, and enhanced stealth in critical moments. Its monolithic construction is built to endure the harshest field conditions—resistant to heat, corrosion, and salt air—while maintaining consistent point-of-impact shift and structural integrity over long-term use. Finished in RD’s infrared-suppressive, non-reflective coating, the LS3 minimizes visual and near-IR signature, making it ideal for operations under night vision, thermal optics, or in environments where discretion is paramount. From suppressed DMRs and short-barreled .300 Blackout rifles to long-range bolt actions, the RD LS3 Suppressor delivers precision and power—quietly and without compromise. Rating
|
LS3TI
In stock
$899.00
Yankee Hill R45 Suppressor - .45 Cal
|
Constructed from 17-4 PH stainless steel. The R45 will find itself at home on a wide variety of firearms and calibers. The robust design allows it to be used on calibers ranging from .17HMR all the way up to the legendary .45-70 Government. The R45 ships with a 5/8-24" HUB Direct Thread Mount. |
YHM-2190-24
In stock
$609.00
Yankee Hill Resonator K Suppressor - .30 Cal
|
Enter YHMs .30 caliber K-Can, the Resonator K. Care, attention to detail, and a love for the industry helped to shape this remarkable piece of engineering. It was designed to provide the shooting enthusiast a quiet, lightweight and cost effective suppressor for the high caliber shooter looking to shed some weight and reduce their footprint. |
YHM-2150-MB-24
In stock
$609.00
Yankee Hill Resonator R2 Suppressor - 30 Caliber w/MB
|
YHM's .30 caliber sound suppressor, the Resonator, was created to provide the shooting enthusiast a quiet, lightweight and cost-effective suppressor. Capable of being used on multiple calibers and host weapons, the Resonator can be used on rifle calibers ranging from .17 HMR through 300 RUM making it a great choice for all shooters. Like the Turbo, the Resonator uses a tubeless design which consists of heat treated 17-4 stainless steel and a heat treated 718 Inconel blast baffle which allows the suppressor to be full auto rated and designed for rigorous use. Muzzle Brake Included! |
YHM-2130-MB-24
In stock
$749.00
Anechoic Anechox 22 DT Titanium, .22LR
|
Ridiculously light, user-serviceable suppressor for your rimfire rifle or pistol. Whisper-quiet.
The AnechoX 22 is the absolute state-of-the-art and the pinnacle of performance for weight, sound, accuracy, and serviceability on your rimfire gun. All AnechoX suppressors utilize the unique X-Baffle Anechoic™️ Chamber System with an interrupted central tube. The AnechoX 22 is brilliantly engineered in Aerospace 7075 T6 Aluminum and Grade 5 STA 1000 Titanium for insanely high strength-to-weight ratios. Titanium is brilliantly used in the blast baffle, thread insert, and front cap to handle the higher uncorking pressure and temperature right at your firearm’s muzzle and to prevent thread galling and carbon lock.
|
X-22-B
Out of stock
Anechoic Anechox 223L DT Titanium, .223 cal
|
The AnechoX 223L DOMINATES AR-15 sound, recoil, backpressure, and muzzle flash! This ultimate titanium suppressor delivers ALIEN TECHNOLOGY level performance on your 22-550 or 5.56. The AnechoX 223L is the most accurate, lightest, quietest, lowest recoil, user-serviceable, Titanium suppressor ever made. It is the absolute state of the art and the pinnacle of performance on your 5.56mm/223 caliber bolt action or semi-auto rifle. A tiny 11 ounces (with DTA included) but the BIG performance of a 8.2″ X 1.6″ full-sized gun muffler. All AnechoX centerfire suppressors are made of Grade 5 Titanium, with 17-4 Stainless blast chambers and blast baffles to handle extreme erosion, uncorking pressure, and temperature right at your firearm’s muzzle. All use the unique X-Baffle Anechoic™ Chamber System with an interrupted central tube, and are finished with Cerakote C Series high-temperature thin film ceramic. The AnechoX 223L comes with a 0.8-ounce titanium 1/2″X28 Direct Thread Adapter installed. It also accepts any AnechoX Direct Thread Adapters or any industry-standard 1-3/8″-24 mount, including Bravo, Hub, Pistons, Boosters, Nielsen Devices, QDs, Tri-lugs, and more. To maximize sound performance and tailor your suppressor to your firearm, Caliber Specific Front Caps (purchased separately) are a great option. Available in six sizes and four colors, including 223 caliber. Especially if you are shooting powerful bolt action rifles, or slow firing your AR-15, you’re gunna’ love these caps!
|
X-223L-B
Out of stock
CAT SC-S Suppressor, 9mm
|
The SC-S builds on the success of its modular predecessor but is intended for the more decerning user. The SC-S is designed as a stand-alone suppressor with a maximum amount of sound performance out of the smallest package possible. Many of the original SC users find that the short version of the modular SC is an optimum balance of suppression and maneuverability, and the extra extension – while unrivaled in blast reduction – is unnecessary size and weight. Enter the SC-S. Built for pistol shooters who want the sound performance of the competition’s full-size 9mm suppressor in a tighter package.
|
CAT-SCSTi
Out of stock
CMMG DefCan 22 Suppressor
|
Weighing in at a mere 5.6oz, the .22LR DEFCAN-22 brings superior sound suppression to your favorite rimfire cartridges. The scant weight and 1 diameter allow the DEFCAN-22 to be as at home on a handgun as it is on the end of a rifle. Removable end caps and baffles make user serviceability a cinch for cleanup while baffle indexing marks make for quick reassembly that assures you get optimal sound suppression once its reassembled. A hex opening on the front cap allows a 1/4" allen wrench or hex bit to be inserted for easier disassembly in the event any carbon fouls up the threads. .22 LR Full-Auto Rated, .17 HMR/.22 Mag Semi-Auto Rated
|
22CA41E
Out of stock
CMMG Zeroed 556K Suppressor
|
5.56mm is one of the most ubiquitous calibers in the USA, so why not have a dedicated suppressor for your 5.56mm firearm? Made to deliver maximum sound suppression on .22 caliber centerfire cartridges, the ZEROD 556K keeps things light and tight with its compact "K" size footprint and direct thread mounts and an overall length of just 5.5". Although reasonable in price the ZEROED 556K makes no compromises in quality. Full 17-4 stainless construction and a nitride finish means this suppressor resists fouling and corrosion like no other. For easy disassembly, the included direct thread mounts feature 7/8 wrench flats and the suppressor features a 3/8 square drive in the end cap. All ZEROED suppressors are made 100% in house by CMMG in our facility, allowing for maximum quality control and affordability. |
11DB015
Out of stock
Dead Air Armament Mask HD 22 Suppressor
|
What sets the Mask apart is its marvelous performance and the ease with which it can be disassembled. It provides balance of performance, weight and extraordinary cleaning intervals that are unmatched by the competition. It features a blend of titanium and 17-4 PH stainless steel construction for direct thread applications. 6.60oz and 5.10" OAL.
Compatible with 22Hornet/5.7x28mm/22LR/17HMR/17WSM/22MAG NOTE: Muzzle Brake is not included with Suppressor. |
MASK22
Out of stock
Dead Air Armament Nomad 30 Suppressor
|
Lightweight. Versatile. Modular. The Nomad-30 exists for the everyday user. Designed to go everywhere you go, mounted on whichever rifle suits your job for the day. The Nomad-30 is made with 17-4 stainless steel and Grade 5 titanium. Weighing in at just 14 ounces you’ll hardly know it’s there. Featuring an improved high-efficiency baffle design, you’ll appreciate industry-leading sound reduction at the muzzle and minimal first-round-pop. Don’t let the lightweight fool you. It will enjoy long walks in the woods with you, but will also handle every bit of that rigorous training course. It ships in its direct-thread configuration with 5/8×24 threads. If you are already a fan of Dead Air muzzle devices, you’ll be happy to know the Nomad-30 is KeyMo compatible. That means your Nomad-30 can have the same robust and proven quick attachment method as the Sandman models, giving you the best of both worlds. Plus, the Nomad-30 is compatible with all Sandman front caps. Up to 300 Norma Mag: 22 HORNET, 5.56 NATO, 22-250, 204 RUGER, .243 WIN, 6.5 CREEDMOOR, 6.8 SPC, 7.62 NATO, 7MM REM MAG, .30-06 SPRINGFIELD, 300 BLACKOUT, 300 WIN, NORMA MAG, ULTRA MAG. Must ship to a U.S. FFL dealer
|
NOMAD30
Out of stock
Dead Air Armament Primal Suppressor .458
|
The Primal is the ideal choice for the minimalist. If you want one silencer that will be as versatile as possible, across a variety of hosts and calibers, the Primal is the best choice. Everything from your 9mm pistol to your 45-70 rifle.The multi-purpose .46 caliber Primal. Optimized for big caliber high-pressure rifles, but adaptable for your pistol – and everything in between. Extreme versatility makes it the king of multi-platform shooting. Direct thread simplicity, quick-attach KeyMo, accuracy-driven Xeno, pistol boosters, and 3-lug for subgun fun, are all made possible thanks to our industry-standard 1.375”-24 rear threads and our newly engineered HUB to P-Series adapter. To get you started, we’re including a 5/8-24 direct thread mount and the HUB to P-Series adapter. The Primal is ready for Nomad, Wolfman, and Ghost compatible mounts, right out of the box. From 9mm to .45 ACP, and 45-70 to .338 Lapua, like a rabid beast the Primal will eat just about anything you give it. If you only want one silencer (to begin with), the Primal is it. Feed it what you want, mount it how you want. |
PRIMAL
Out of stock
Dead Air Armament Sandman-K Suppressor - 7.62 QD w/Mount
|
For those demanding absolute performance and durability, the Sandman Series delivers. Made and constructed from the toughest silencer materials, these are built to stand the test of time for serious users – and do so for military and law enforcement around the world. The QD system is design perfection. One-hand installation or removal in just seconds. No wobble, no seizing, no affected performance; just easy on, easy off, with minimal point of impact shift and no loss of precision. The Cobalt 6 baffles are welded into a solid core for added strength and durability. The front cap is detachable and features an integrated flash hider. The Sandman K was developed for very specific uses. Adding a mere 2.9″ to the end of your muzzle it is your compact companion. SPECS
|
780692
Out of stock