SUPPRESSORS
Shop by:
 More
|
Your results are being filtered by:
- Category -> SUPPRESSORS
Remove Filters
Products
Anechoic Anechox 35L DT Titanium, .35 cal
|
The AnechoX 35L DOMINATES the competition and the noise! The ultimate can for the ultimate hunter or long-range shooter in all 33 and 35 caliber, magnum, and high-power rifles. When you factor in the weight, accuracy, recoil, sound performance, and user serviceability, there has simply never been anything like it. At just 10.2 ounces (11.0 ounces with DTA included) and 8.2″ X 1.6″, the AnechoX 35L is the lightest, quietest, user-serviceable Titanium Suppressor for the most powerful 338 and 358 caliber magnum rifles. So versatile that you can run it on everything down to your 9mm PCC, 308/7.62mm, or handgun. Even your 223/5.56mm. The AnechoX 35L is the absolute state of the art and the pinnacle of performance for its accuracy, weight, sound, and serviceability. It’s at its best when carried long distances on bolt-action hunting guns, where weight really matters. But, its flow-thru design virtually eliminates backpressure change, thus minimizing additional gas in your face and cycling issues when rapid-fire shooting AR-10 or AR-15 semi-autos like the 8.6 Blackout at the range. All AnechoX centerfire suppressors are made of Grade 5 Titanium, with 17-4 Stainless blast chambers and blast baffles to handle extreme erosion, uncorking pressure, and temperature right at your firearm’s muzzle. All use the unique X-Baffle Anechoic™ Chamber System with an interrupted central tube and are finished with Cerakote C Series high-temperature thin film ceramic. The AnechoX 35L comes with a 1/2″-28 Direct Thread Adapter installed. It also accepts any of the AnechoX Direct Thread Adapters or any industry standard 1-3/8″-24 mount, including Bravo, Hub, Pistons, Boosters, Nielsen Devices, QDs, Tri-lugs, and more. Rating
|
X-35L-B
In stock
$1146.65
Anechoic Anechox 45L DT Titanium, .45 cal
|
The AnechoX 45L PULVERIZES sound and recoil from the loudest, highest-energy rifles from .375 H&H on up. It was computer-designed for the fastest velocities and highest uncorking pressures associated with rifle cartridges that produce from 4,000 to 6,000 ft-lb of energy. The ultimate can for the ultimate man. The full-sized AnechoX 45L is the lightest, quietest, user-serviceable Titanium Suppressor ever designed for big-bore rifles from 37 to 45 caliber magnums. At Just 11 ounces (with DTA included), it hardly changes the weight and balance of your beast, but tames its ferocious roar and kick. All AnechoX centerfire suppressors are made of Grade 5 Titanium, with 17-4 Stainless blast chambers and blast baffles to handle extreme erosion, uncorking pressure, and temperature right at your firearm’s muzzle. All use the unique X-Baffle Anechoic™ Chamber System with an interrupted central tube, and are finished with Cerakote C Series high-temperature thin film ceramic. The AnechoX 45L comes with a 5/8″-24 Direct Thread Adapters installed. It also accepts any of the AnechoX Direct Thread Adapters or any industry standard 1-3/8″-24 mount, including Bravo, Hub, Pistons, Boosters, Nielsen Devices, QDs, Tri-lugs, and more. To maximize sound performance and tailor your suppressor to your firearm, Caliber Specific Front Caps (purchased separately) are a great option. Available in six sizes and four colors, including 40 and 45 caliber. Especially if you are shooting powerful 37 to 40 caliber rifles, you need these caps!
|
X-45L-B
In stock
$1197.65
CAT NOAH 718 Suppressor, 6mm
|
C.A.T’s lead technical engineer – Mr. Noah Arkman, has focused his divine talents to a new, albeit less celestial, creation: a fully AI-engineered 6mm suppressor, with outputs from the realm of ballistic serenity. This isn’t any suppressor; it is the epitome of divine intervention in gun tech. Crafted with a heavenly blend of algorithmic precision, Surge Bypass technologies and prophetic insight, Noah’s creation boasts a form factor so sleek and an output so hushed that this AI-crafted marvel stands out not just as a product, but as a testament to what happens when ancient wisdom meets artificial intelligence. Finally, the venerable Ark architect has created the perfect bridge between 5.56mm and 6ARC muzzle velocities in a singular vessel, another Ark so to speak. NOAH has again corralled creatures by two.
|
CAT NOAH 718 HUB
In stock
$1250.00
Dead Air Armament Sandman-L Suppressor - 7.62 QD w/Mount
|
For those demanding absolute performance the Sandman-L(TM) delivers. Made and constructed from the same materials as the S version, the L is only 8.9 inches in length, but offers a true sound reduction of 31dB firing standard 7.62 ammunition. * This is the best performing and quietest 7.62 suppressor on the market. The Sandman-L(TM) uses our industry best QD system for fool-proof quick one handed mounting. No seizing, and minimal point of impact shifts. The mount features Nitride(R) finished 17-4 stainless steel construction for the ultimate in durability. The Stellite(R) baffles form a solid welded core for extreme durability with a detachable front cap featuring an integrated flash hider. The entire suppressor gets a Cerakote(R) finish for ultimate corrosion protection. For a tactical bolt rifle or a .308 AR there isn't a better can in the Sandman-L(TM) class. SPECS
|
SML762
In stock
$969.00
Dead Air X Ruger RXD22Ti, .22 Cal
|
Dead Air delivers a new standard in rimfire performance: the RXD22Ti. This innovative suppressor is comprised of a Titanium tube, a 3D printed PVD coated single-piece Triskelion core, titanium retaining cap and an all-new XRF muzzle brake specially designed to enhance performance and capture lead.
Rating:
|
RXD22TiBLK
In stock
$469.00
Energetic Armament NYX MOD2, .22LR 1/2x28 Black Nitride
|
The NYX Mod 2 Silencer is a high performance, all-titanium rimfire silencer that may be easily reconfigured between a short 4 baffle configuration and a full length 8-baffle configuration. It's aerospace-inspired tube design represents the states-of-the-art in engineered firearms components with the highest strength-to-weight ration in it's class. The NYX MOD 2 Silencer can be cleaned with aggressive solvents and cleaning solutions without fear of damage unlike aluminum and stainless silencers. Your suppressor will stay looking sharp even after lots of use and cleaning. Both end caps are removable without the need for special tools making disassembly and reassembly simple.
|
EA02
In stock
$499.00
Gemtech Lunar 45 Suppressor
|
The Gemtech Lunar-45 is the culmination of decades of silencer innovation. It is a light and quiet modular 45 caliber suppressor available that is able to be completely taken apart and cleaned. The Lunar-45 is crafted from military grade aluminum and titanium for the utmost in durability and strength. It comes with a .578"-28 tpi piston. |
12126
In stock
$744.95
Griffin Armament Dual-Lok PSR Suppressor, 7.62mm 5/8x24
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados.
|
GADLPSR762-W
In stock
$1101.00
Griffin Armament Optimus 6 Suppressor, 5.56mm/6mm, Hub
|
The Optimus® 6 is a 6mm bore additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over “traditional” suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market.
The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP6UM-W
In stock
$599.95
Otter Creek Infinity, 7.62 - BLK
|
Infinity — We decided to call this project Infinity early on because we wanted this to be a suppressor that will last you forever, you can pass down to your grandchildren and it last them forever too. Also because of it’s adjustability and ability to be configured to any host you have. It’s also marks our entry into the low back pressure market. Notice I didn’t say no back pressure, I said lowER back pressure. We wanted this suppressor to straddle the line of suppressors with zero back pressure that sound like a pipe bomb and suppressors with high back pressure that sound great. There’s no free lunch when it comes to sound suppression. You either have a suppressor that’s loud with zero gas to the face or you have a suppressor that’s quiet with some uncomfortable gas to the face, it just is what it is. We wanted a suppressor that could ride the middle ground line and venture to both sides of the line depending on what the user wanted. So let’s cut through the bull shit and get down to the nitty gritty of what this suppressor does and what makes it unique. We knew we wanted it to be 7.62 bore with changeable end caps. We knew we wanted it to have great 7.62 performance but let’s not kid ourselves, 99% of users buying a 7.62 bore suppressor are using it on 5.56 most of the time. So the 5.56 performance also had to be on point. We developed the general sound profile using 7.62 and then further dialed it in and refined it using 5.56 – we made over 100 prototypes in almost 2 years of testing finding just the right combination that does just as good on 5.56 as an actual 5.56 bore suppressor while still offering great 7.62 performance AND works well being vented or unvented. Included:
|
INF762
In stock
$1250.00
Q Southpaw Silencer, 5.56mm
|
Q’s first dedicated 5.56 silencer keeps things compact, tough, and easy to swap. The Southpaw measures about 6 inches long, 1.75 inches wide, and only 13.2 ounces – perfect for SBRs or full-length rifles. A built-in Plan B taper-lock (Quickie Fast-Attach) grabs any Cherry Bomb or the included Rear End mount in two quick turns, while 1-inch wrench flats make removal painless under heat. Stainless-steel baffles and an Inconel blast baffle shrug off mag-dumps and keep flash to a minimum. Whether you’re chasing split-second transitions or just lighter front-end weight, Southpaw delivers Q’s signature blend of simplicity and performance.
Rated:
No Barrel Restrictions |
SIL-SP-QUICKIE-556
In stock
$999.99
Radical Defense LS3 Ti Rifle Suppressor 30 Cal, 5/8x24
|
The RD LS3 Suppressor is engineered for shooters who demand maximum control, minimal signature, and uncompromising reliability. Optimized for .300 Blackout systems and bolt-action precision rifles, the LS3 delivers exceptional sound reduction, recoil management, and long-term durability in a compact, mission-ready package. Designed with RD’s proprietary Breathable Technology®, the LS3 actively reduces blowback and back pressure—ensuring smooth cycling and stable performance, even during rapid fire on semi-auto platforms or repeated shots from suppressed bolt guns. The result: tighter shot groups, reduced shooter fatigue, and enhanced stealth in critical moments. Its monolithic construction is built to endure the harshest field conditions—resistant to heat, corrosion, and salt air—while maintaining consistent point-of-impact shift and structural integrity over long-term use. Finished in RD’s infrared-suppressive, non-reflective coating, the LS3 minimizes visual and near-IR signature, making it ideal for operations under night vision, thermal optics, or in environments where discretion is paramount. From suppressed DMRs and short-barreled .300 Blackout rifles to long-range bolt actions, the RD LS3 Suppressor delivers precision and power—quietly and without compromise. Rating
|
LS3TI
In stock
$899.00
Rugged Mustang Ti 22 - BLK
|
The Mustang22 is the ideal mix of Grade 5 Titanium and 7075 aircraft-grade aluminum. Utilizing our ADAPT modular technology, the Mustang22 has multiple configurations to meet your needs. If you're looking for a dedicated .22 suppressor look no further! You don't have to choose between a short rifle suppressor and a long one; with ADAPT Modules you get two lengths with one tax stamp. You can have a shorter and ultra light suppressor in seconds compared to months. Rugged strategically place the engraving on the Titanium mount. The Titanium and our Unconditional Lifetime Warranty create infinite life for your suppressor due to the strength of the material and the location of the serial number. Ratings:
|
P5122
In stock
$392.00
Rugged Obsidian 9 - BLK
|
The Obsidian9 is optimized for 9mm for additional suppression while staying light and compact. Our ADAPT™ Module gives you 2 lengths in one suppressor, for maximum suppression or weight/length savings. With a diameter of 1.37″ the Obsidian9 is compatible with pistol suppressor sights, making it perfect for pistols or sub-guns. Diameter: 1.37″ Baffles: 17-4 Stainless Steel Belt Fed Rated for Pistol Calibers up-to 9mm |
OBS0009
In stock
$659.99
Yankee Hill R45 Suppressor - .45 Cal
|
Constructed from 17-4 PH stainless steel. The R45 will find itself at home on a wide variety of firearms and calibers. The robust design allows it to be used on calibers ranging from .17HMR all the way up to the legendary .45-70 Government. The R45 ships with a 5/8-24" HUB Direct Thread Mount. |
YHM-2190-24
In stock
$609.00
Yankee Hill Resonator K Suppressor - .30 Cal
|
Enter YHMs .30 caliber K-Can, the Resonator K. Care, attention to detail, and a love for the industry helped to shape this remarkable piece of engineering. It was designed to provide the shooting enthusiast a quiet, lightweight and cost effective suppressor for the high caliber shooter looking to shed some weight and reduce their footprint. |
YHM-2150-MB-24
In stock
$609.00
Yankee Hill Resonator R2 Suppressor - 30 Caliber w/MB
|
YHM's .30 caliber sound suppressor, the Resonator, was created to provide the shooting enthusiast a quiet, lightweight and cost-effective suppressor. Capable of being used on multiple calibers and host weapons, the Resonator can be used on rifle calibers ranging from .17 HMR through 300 RUM making it a great choice for all shooters. Like the Turbo, the Resonator uses a tubeless design which consists of heat treated 17-4 stainless steel and a heat treated 718 Inconel blast baffle which allows the suppressor to be full auto rated and designed for rigorous use. Muzzle Brake Included! |
YHM-2130-MB-24
In stock
$749.00
Anechoic Anechox 22 DT Titanium, .22LR
|
Ridiculously light, user-serviceable suppressor for your rimfire rifle or pistol. Whisper-quiet.
The AnechoX 22 is the absolute state-of-the-art and the pinnacle of performance for weight, sound, accuracy, and serviceability on your rimfire gun. All AnechoX suppressors utilize the unique X-Baffle Anechoic™️ Chamber System with an interrupted central tube. The AnechoX 22 is brilliantly engineered in Aerospace 7075 T6 Aluminum and Grade 5 STA 1000 Titanium for insanely high strength-to-weight ratios. Titanium is brilliantly used in the blast baffle, thread insert, and front cap to handle the higher uncorking pressure and temperature right at your firearm’s muzzle and to prevent thread galling and carbon lock.
|
X-22-B
Out of stock