SUPPRESSORS

The ultra-high performance patented VENT TM Suppressor utilizes the next generation of suppressor technology. The design features sintered titanium and patented Purposely Induced Porosity (PIP), which enables it to outperform nearly every competitor in the market with its unique combination of lightweight, heat dissipation, sound suppression, and back pressure reduction. These suppressors employ a 3D-printed, monolithic, body-to-core structure, increasing their structural integrity and thermal resilience. This revolutionary design eliminates failure points often associated with traditional suppressors. Through the use of Purposely Induced Porosity (PIP), PTRs engineers are able to finely tune the strength, density, heat capacity, and thermal conductivity of the VENT suppressors in ways that are beyond the capabilities of traditional manufacturing. This industry leading technology creates a way to control the rapid expansion of gas that traditional baffle and flow through suppressors are unable to achieve, making the line of VENTTM Suppressors truly cutting-edge and superior in the marketplace.

Rating

• 9mm - 120 Rounds (full auto) – 10 Minute cool down
• Full Auto Rated (No barrel Restriction) 357 Magnum / 38 Special
• (No barrel Restriction) 300 BLK Subsonic (8" Barrel or longer)

Must ship to a U.S. FFL dealer

The ultra-high performance patented VENT TM Suppressor utilizes the next generation of suppressor technology. The design features sintered titanium and patented Purposely Induced Porosity (PIP), which enables it to outperform nearly every competitor in the market with its unique combination of lightweight, heat dissipation, sound suppression, and back pressure reduction. These suppressors employ a 3D-printed, monolithic, body-to-core structure, increasing their structural integrity and thermal resilience. This revolutionary design eliminates failure points often associated with traditional suppressors. Through the use of Purposely Induced Porosity (PIP), PTRs engineers are able to finely tune the strength, density, heat capacity, and thermal conductivity of the VENT suppressors in ways that are beyond the capabilities of traditional manufacturing. This industry leading technology creates a way to control the rapid expansion of gas that traditional baffle and flow through suppressors are unable to achieve, making the line of VENTTM Suppressors truly cutting-edge and superior in the marketplace.

Rating

• 5.56 Nato Full Auto
• 10.3'' or longer barrel restriction

Must ship to a U.S. FFL dealer

3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-3 is one of the most durable suppressors on the market to date. The LS-3 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-3 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.

Rating

• 7.62 Full Auto

Must ship to a U.S. FFL dealer

3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-5 is one of the most durable suppressors on the market to date. The LS-5 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-5 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.

Rating

• 5.56 Nato Full Auto

Must ship to a U.S. FFL dealer

Rating

• 5.56 Nato Full Auto

Must ship to a U.S. FFL dealer

Sig's MODX-9 features a user configurable modular baffle design. It has titanium construction with an unique exterior design which doubles as a wrench flats. Included are 1/2"-28 & M13.5x1LH threads, and fixed barrel spacer for use with carbines. The MODX-9 also features 21 points of impact adjustment.

The Sig Sauer SRD22X .22LR Suppressor can be used on both pistols and rifles and features a Grade 9 Titanium outer tube with stainless steel baffles. An inner stainless steel tube enables easy disassembly and cleaning. Due to the durability of its materials, the SRD22X can be used with .22LR pistols or rifles, and pistols or rifles chambered in .17HMR/.17 Mach II and .22 Magnum. The SRD22X comes with a 1/2”x 28tpi and an available M9x.75 rear mount. Specifications are subject to change.

-Length: 5.8 in (147 mm)

-Weight: 5.1 oz (144 g)

-Threads: 1/2-28 tpi

The Sig Sauer SRD556 is a direct thread suppressor using inconel 718, a Nickel Alloy Stainless Steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.4x1.625 in.

-Weight: 11.5 ounces

-Threads: 1/2-28 tpi

-dB level - 133dB

Will ship from our St. Augustine Location.

The Sig Sauer SRD556Ti-QD is a Grade 5 Titanium quick detach suppressor. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the fast-attach mount. The SRD556Ti-QD comes with one 1/2"x 28tpi Taper-Lok™ muzzle brake. Utilizes the popular 1/2"x 28tpi threads.

-Length: 6.8x1.75 in.

-Weight: 11.8 ounces

-Threads: 1/2-28 tpi

-dB level - 134dB

Will ship from our St. Augustine location.

SilencerCo Hybrid 46 DTM is the same familiar face as the Hybrid 46 with a lighter mount. Featuring a titanium tube and fully-welded, 17-4 stainless steel and Inconel baffle stack, the Hybrid 46 DTM is tough enough to tame nearly every round that’ll fit through its .46 caliber bore. From pistols up to .45 caliber, lever guns up to .45-70 Gov’t, rifles in 5.56 on up to 338 Lapua Magnum energy levels firing bullets up to .46 caliber, this do-it-all silencer has you covered!

Full-auto and magnum-rated, the Hybrid 46 DTM uses a titanium tube to keep its weight down to just 13.7 ounces. The Hybrid 46 DTM can easily swap between all of your host weapons by using ASR mounts, a pistol booster, 3-Lug adapters, direct thread adapters, and more.

As with its modular siblings, the Omega 36M and Hybrid 46M, the Hybrid 46 is manufactured in Utah and protected by SilencerCo’s lifetime warranty.

TECHNICAL SPECIFICATIONS:

• Weight: 13.7 oz
• Length: 7.8”
• Diameter: 1.56"
• Build materials: titanium; stainless steel; Inconel
• Full-auto and magnum rated!
• The Hybrid uses the same pistons as the Octane Series, Osprey Series, and Omega K Series

The Hybrid is the silencer for any platform. Compatible with pistol calibers from 9mm to .45ACP, rifle calibers from 5.56mm to .4570 GOV and many in between like .458 SOCOM, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles and submachine guns. Boasting low-120 dBs on .300 BLK and remaining hearing safe with .4570 GOV, the Hybrid offers an unparalleled pairing of versatility and performance a combination youve come to expect from SilencerCo products. The Hybrid is rated down to 16" barrels for .4570 GOV and .458 SOCOM and down to 18" barrels for all magnum calibers up to .338 Lapua Magnum. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand.