Magpul Industries - Manufacturers - Top Gun Supply

Shop by:

Caliber
Color
+ More

Magpul Industries

more...
Magpul Industries

Products

Magpul ACS Adaptable Carbine Storage Stock - COMMERCIAL - BLACK

Magpul ACS Adaptable Carbine Storage Stock - COMMERCIAL - BLACK

The Magpul Industries ACS Adaptable Carbine Storage Stock is a new design featuring an integral storage compartment built right into the stock. Two water resistant battery storage tubes allow the operator to keep fresh batteries quickly at hand when needed. The friction lock keeps the stock tight and rattle free. A durable rubber buttpad is mounted on the rear for comfort and stability. The Magpul ACS is a direct replacement for the Colt M4 collapsible buttstock and other rifles using a commercial size buffer tube. Made in the U.S.A.!

MAG371-BLK

Out of stock

Out of stock
Magpul ACS-L Adaptable Carbine Stock Light - MIL-SPEC - BLACK

Magpul ACS-L Adaptable Carbine Stock Light - MIL-SPEC - BLACK

The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package. Made in the U.S.A.!

MAG378-BLK

Out of stock

Out of stock
Magpul Angled Fore Grip M-Lok - Black

Magpul Angled Fore Grip M-Lok - Black

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

MAG598-BLK

Out of stock

Out of stock
Magpul BAD Lever

Magpul BAD Lever

The Magpul B.A.D. Battery Assist Device is a quick and easy modification to AR-15 / M-16 rifles that allows the shooter access to the bolt catch from the right side of the receiver. This provides easy operation without shifting your grip on the rifle to close the bolt. Includes B.A.D. Lever assembly with Torx wrench.

MAG980

Out of stock

Out of stock
Magpul Bipod M-LOK - BLACK

Magpul Bipod M-LOK - BLACK

The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Fits M-LOK rails, black in color, adjustable length from 6.3" - 10.3" and weighs 11oz.

MAG933-BLK

Out of stock

Out of stock
Magpul BTR Arm Stabilizing Brace

Magpul BTR Arm Stabilizing Brace

Made in the USA, the Magpul BTR is an AR arm brace designed to improve the single-handed employment of large-format pistols. The BTR utilizes Magpul design and engineering to offer a stabilizing accessory with a robust feature set and trusted Magpul quality. With classic Magpul aesthetics, the BTR is compatible with Mil-Spec carbine receiver extensions and employs a simplified, durable, and easy to use adjustment mechanism. An integrated QD cup and M-LOK compatible slot provide ambidextrous sling mounting options and enable stabilizing sling tension to be applied, drastically increasing single-handed control of the firearm. With a straight-forward design and Magpul innovation, the BTR is a simple solution to improving your AR pistol.

MAG1079-BLK

Out of stock

Out of stock
Magpul CTR Carbine Stock - MIL-SPEC - FLAT DARK EARTH

Magpul CTR Carbine Stock - MIL-SPEC - FLAT DARK EARTH

The Magpul CTR (Compact/Type Restricted) - Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability;and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

MAG310-FDE

Out of stock

Out of stock
Magpul MOE Carbine Stock - COMMERCIAL - BLACK

Magpul MOE Carbine Stock - COMMERCIAL - BLACK

The Magpul Original Equipment Commercial stock is an economical drop-in option while still maintaining the quality and durability you expect from any Magpul products. The Magpul MOE is a direct replacement for the M4 collapsible buttstock using a commercial size buffer tube.

MAG401-BLK

Out of stock

Out of stock
Magpul MS3 Single QD Sling Gen 2 - BLK

Magpul MS3 Single QD Sling Gen 2 - BLK

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

MAG515-BLK

Out of stock

Out of stock
Magpul MS3 Single QD Sling Gen 2 - GRY

Magpul MS3 Single QD Sling Gen 2 - GRY

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

MAG515-GRY

Out of stock

Out of stock
Magpul MS4 Dual QD Sling Gen 2 - BLK

Magpul MS4 Dual QD Sling Gen 2 - BLK

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

MAG518-BLK

Out of stock

Out of stock
Magpul MS4 Dual QD Sling Gen 2 - GRY

Magpul MS4 Dual QD Sling Gen 2 - GRY

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

MAG518-GRY

Out of stock

Out of stock
Magpul PMAG AK47 7.62x39 10RD Magazine - MOE - BLACK

Magpul PMAG AK47 7.62x39 10RD Magazine - MOE - BLACK

Made in the USA, the PMAG 10 AK/AKM MOE is an inexpensive, lightweight, highly reliable 10-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm. It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the affordable performance you expect from a MOE PMAG.

MAG657-BLK

Out of stock

Out of stock
Magpul PMAG AR15 .223 10RD Magazine - GEN M3 - BLACK

Magpul PMAG AR15 .223 10RD Magazine - GEN M3 - BLACK

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

MAG559-BLK

Out of stock

Out of stock
Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - BLACK

Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - BLACK

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.


Please check restricted shipping zones before ordering.

MAG557-BLK

Out of stock

Out of stock
Magpul PMAG Ranger Plate - FLAT DARK EARTH

Magpul PMAG Ranger Plate - FLAT DARK EARTH

These Flat Dark Earth Ranger Plates from Magpul Industries are designed to fit PMAG magazines. A hard rubber integrated loop will help to absorb the shock of dropping the magazine on the ground and provide additional controllability for rapid magazine reloads.

MAG221-FDE

Out of stock

Out of stock
Magpul PMAG Ranger Plate - GEN M3 - BLACK - 3PK

Magpul PMAG Ranger Plate - GEN M3 - BLACK - 3PK

Designed to be a floorplate replacement for the Gen M3 PMAG magazines, the Ranger plate features a hard rubber integrated loop will help to absorb the shock of dropping the magazine on the ground and provide additional controllability for rapid magazine reloads. 3 Pack.

MAG561-BLK

Out of stock

Out of stock
Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

The Magpul Industries ACS Adaptable Carbine Storage Stock is a new design featuring an integral storage compartment built right into the stock. Two water resistant battery storage tubes allow the operator to keep fresh batteries quickly at hand when needed. The friction lock keeps the stock tight and rattle free. A durable rubber buttpad is mounted on the rear for comfort and stability. The Magpul ACS is a direct replacement for the Colt M4 collapsible buttstock and other rifles using a mil-spec size buffer tube. Made in the U.S.A.!

MAG370-BLK

In stock

$84.95