Magpul Industries - Manufacturers - Top Gun Supply

The GEN M2 PMAG™ is contructed of a durable, lightweight polymer, designed for use with 5.56 NATO and .223 Remington ammunition in M-16, AR-15 rifles. The new MOE Magazine is identical to the 211 non window model PMAG, however does not come with a dustcover.

Please check restricted shipping zones before ordering.

The PMAG 27 GL9 is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM competition magazine, the PMAG 27 GL9 offers additional capacity without the need for expensive extensions.

Includes a high visibility, controlled-tilt follower, a stainless steel spring, and an easily removable floorplate for cleaning. Also includes a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. Drops free when loaded or unloaded.

The PMAG 27 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip.

Made in U.S.A.

FEATURES

• Compatible with all 9mm double-stack Glock handguns
• Durable, lightweight, and rigid polymer construction
• High visibility, controlled-tilt follower
• Long-life stainless steel spring for corrosion resistance
• Flared, easily removable floor plate
• Dot matrix panel for magazine marking and identification
• Magazine indicator windows on both sides of body at 10, 15, 20, and 27 rounds remaining
• Drops free when loaded or unloaded

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Fits M-LOK rails, black in color, adjustable length from 6.3" - 10.3" and weighs 11oz.

The Magpul Industries CTR stock replaces the standard M4 stock using the mil-spec tube. This stock has a friction lock to provide no movement of the stock to the buffer tube.

The Magpul Industries MBUS Pro is an all-steel corrosion resistant sight designed to mount directly to the top of your rifle rail to provide for a rugged, dependable flip up sight. A no tool required elevation knob as well as positive locking detents for both the up and down positions enhance user capability.

The Magpul Industries Magpul Back Up Sight. This polymer flip-up adjustable sight is designed to mount on your rifle top rail and is designed with the durability and usability that you have come to expect from Magpul Industries.

The Gen 2 Magpul MS3 Multi-Mission Sling was designed for easy, rapid conversion between a single-point and two-point sling. The MS3 allows the user to exploit the maneuverability of a one point sling, or the stability of a two point sling. Single hand adjustments and quick release make this a very versatile and user friendly platform. Set up for clip-style front and rear sling attachment points.

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

The next generation .308 PMAG features numerous improvements over the original MAG243 .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, snap on dust cover, high quality stainless steel magazine spring, paint pen dot matrix for easy numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.

The PMAG 30 MOE is a high reliability 30RD AK47 Magazine designed for the Kalashnikov pattern rifle and its variants. Features a removable baseplate, aggressive front and rear texture, paint pen dot matrix for easy numbering and a high reliability/low friction follower for enhanced performance.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Magpul RVG, railed vertical grip mounts easily on any 1913 picatinny rail rifle rail. A cost effective option as a lightweight vertical grip with an ergonomic design.

Magpul AFG, angled fore grip takes natural ergonomics into consideration with this new, unique design. Comfortable positioning to the fore grip provides precise control and lower fatigue, while improving accuracy.