Magpul Industries - Manufacturers - Top Gun Supply

Shop by:

Caliber
Color
+ More
Category

Magpul Industries

more...
Magpul Industries

Products

Magpul MS3 Multi-Mission Sling Gen 2 - BLK

Magpul MS3 Multi-Mission Sling Gen 2 - BLK

The Gen 2 Magpul MS3 Multi-Mission Sling was designed for easy, rapid conversion between a single-point and two-point sling. The MS3 allows the user to exploit the maneuverability of a one point sling, or the stability of a two point sling. Single hand adjustments and quick release make this a very versatile and user friendly platform. Set up for clip-style front and rear sling attachment points.

MAG514-BLK

In stock

$47.95

Magpul MS3 Single QD Sling Gen 2 - GRY

Magpul MS3 Single QD Sling Gen 2 - GRY

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

MAG515-GRY

In stock

$57.95

Magpul MS4 Dual QD Sling Gen 2 - GRY

Magpul MS4 Dual QD Sling Gen 2 - GRY

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

MAG518-GRY

In stock

$59.95

Magpul PMAG D-50 AR10 .308 50RD Magazine  - BLACK

Magpul PMAG D-50 AR10 .308 50RD Magazine - BLACK

Made in the USA, the Magpul PMAG D-50 is a rugged, lightweight, and reliable 50-round polymer drum magazine designed for 7.62x51 NATO/.308 Winchester ammunition for SR25/M110 pattern rifles. The Magpul PMAG D-50 shares its DNA with the legendary Magpul PMAG GEN M3, which includes next-generation impact and crush-resistant polymer construction and the ability to seat fully loaded on a closed bolt. Robust stainless-steel internals withstand corrosion and long-term storage while loaded with no loss of function, spring fatigue, or reliability concerns. A slip-on semi-rigid dust cover prevents grit and debris intrusion during storage and transport. An anti-glare translucent window on the rear of the drum makes for quick positive visual indication of remaining ammunition.

Please check restricted shipping zones before ordering.

MAG993-BLK

In stock

$149.95

Magpul PMAG Dust Cover - GEN 2 MOE - BLACK - 3PK

Magpul PMAG Dust Cover - GEN 2 MOE - BLACK - 3PK

Supplemental dust covers for the Gen 2 PMAG models. Designed to reduce debris intrusion, and cartridge damage during transport or storage. 3 Pack.

MAG216-BLK

In stock

$3.99

Magpul RVG Railed Vertical Grip - Black

Magpul RVG Railed Vertical Grip - Black

Magpul RVG, railed vertical grip mounts easily on any 1913 picatinny rail rifle rail. A cost effective option as a lightweight vertical grip with an ergonomic design.

MAG412-BLK

In stock

$23.95

Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

The Magpul Industries ACS Adaptable Carbine Storage Stock is a new design featuring an integral storage compartment built right into the stock. Two water resistant battery storage tubes allow the operator to keep fresh batteries quickly at hand when needed. The friction lock keeps the stock tight and rattle free. A durable rubber buttpad is mounted on the rear for comfort and stability. The Magpul ACS is a direct replacement for the Colt M4 collapsible buttstock and other rifles using a mil-spec size buffer tube. Made in the U.S.A.!

MAG370-BLK

In stock

$84.95

Magpul AFG1 Angled Fore Grip - Black

Magpul AFG1 Angled Fore Grip - Black

Magpul AFG, angled fore grip takes natural ergonomics into consideration with this new, unique design. Comfortable positioning to the fore grip provides precise control and lower fatigue, while improving accuracy.

MAG411-BLK

In stock

$34.95

Magpul AFG2 Angled Fore Grip - Black

Magpul AFG2 Angled Fore Grip - Black

Magpul AFG2, angled fore grip takes natural ergonomics into consideration with this new, unique design. Comfortable positioning to the fore grip provides precise control and lower fatigue, while improving accuracy. A shorter, slim design for a higher compatibiltiy with a variety of rail systems.

MAG414-BLK

In stock

$33.95

Magpul Angled Fore Grip M-Lok - FDE

Magpul Angled Fore Grip M-Lok - FDE

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

MAG598-FDE

In stock

$25.60

Magpul AR15/M4 Armorers Wrench

Magpul AR15/M4 Armorers Wrench

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

MAG535-BLK

In stock

$79.95

Magpul Bipod M-LOK - BLACK

Magpul Bipod M-LOK - BLACK

The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Fits M-LOK rails, black in color, adjustable length from 6.3" - 10.3" and weighs 11oz.

MAG933-BLK

In stock

$109.95

Magpul CTR Carbine Stock - MIL-SPEC - BLACK

Magpul CTR Carbine Stock - MIL-SPEC - BLACK

The Magpul Industries CTR stock replaces the standard M4 stock using the mil-spec tube. This stock has a friction lock to provide no movement of the stock to the buffer tube.

MAG310-BLK

In stock

$56.95

Magpul CTR Carbine Stock - MIL-SPEC - FLAT DARK EARTH

Magpul CTR Carbine Stock - MIL-SPEC - FLAT DARK EARTH

The Magpul CTR (Compact/Type Restricted) - Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability;and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

MAG310-FDE

In stock

$56.95

Magpul Industries MBUS Front Sight - DARK EARTH - GENII

Magpul Industries MBUS Front Sight - DARK EARTH - GENII

The Magpul Industries Magpul Back Up Sight. This dark earth polymer flip-up adjustable front sight is designed to mount on your rifle top rail and is designed with the durability and usability that you have come to expect from Magpul Industries.

MAG247-FDE

In stock

$36.95

Magpul Industries MBUS Rear Sight - DARK EARTH - GENII

Magpul Industries MBUS Rear Sight - DARK EARTH - GENII

The Magpul Industries Magpul Back Up Sight. This dark earth polymer flip-up adjustable rear sight is designed to mount on your rifle top rail and is designed with the durability and usability that you have come to expect from Magpul Industries.

MAG248-FDE

In stock

$55.05

Magpul M-Lok Hand Stop Kit - Black

Magpul M-Lok Hand Stop Kit - Black

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

MAG608-BLK

In stock

$24.95

Magpul M-Lok Hand Stop Kit - FDE

Magpul M-Lok Hand Stop Kit - FDE

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

MAG608-FDE

In stock

$24.95