Magpul Industries - Manufacturers - Top Gun Supply

Shop by:

Caliber
Color
+ More
Category

Magpul Industries

more...
Magpul Industries

Products

Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - MCT

Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - MCT

Made in the U.S.A, the PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO/223 Rem. Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Medium Coyote Tan Finish.


Please check restricted shipping zones before ordering.

MAG557-MCT

Out of stock

Out of stock
Magpul PMAG AR15 .223 40RD Magazine - GEN M3 - BLACK

Magpul PMAG AR15 .223 40RD Magazine - GEN M3 - BLACK

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

MAG233-BLK

Out of stock

Out of stock
Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

Magpul ACS Adaptable Carbine Storage Stock - MIL-SPEC - BLACK

The Magpul Industries ACS Adaptable Carbine Storage Stock is a new design featuring an integral storage compartment built right into the stock. Two water resistant battery storage tubes allow the operator to keep fresh batteries quickly at hand when needed. The friction lock keeps the stock tight and rattle free. A durable rubber buttpad is mounted on the rear for comfort and stability. The Magpul ACS is a direct replacement for the Colt M4 collapsible buttstock and other rifles using a mil-spec size buffer tube. Made in the U.S.A.!

MAG370-BLK

Out of stock

Out of stock
Magpul PMAG AR15 .223 20RD Magazine - GEN M3 - BLACK

Magpul PMAG AR15 .223 20RD Magazine - GEN M3 - BLACK

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.


Please check restricted shipping zones before ordering.

MAG560-BLK

Out of stock

Out of stock
Magpul ACS Adaptable Carbine Storage Stock - COMMERCIAL - BLACK

Magpul ACS Adaptable Carbine Storage Stock - COMMERCIAL - BLACK

The Magpul Industries ACS Adaptable Carbine Storage Stock is a new design featuring an integral storage compartment built right into the stock. Two water resistant battery storage tubes allow the operator to keep fresh batteries quickly at hand when needed. The friction lock keeps the stock tight and rattle free. A durable rubber buttpad is mounted on the rear for comfort and stability. The Magpul ACS is a direct replacement for the Colt M4 collapsible buttstock and other rifles using a commercial size buffer tube. Made in the U.S.A.!

MAG371-BLK

Out of stock

Out of stock
Magpul CTR Carbine Stock - MIL-SPEC - BLACK

Magpul CTR Carbine Stock - MIL-SPEC - BLACK

The Magpul Industries CTR stock replaces the standard M4 stock using the mil-spec tube. This stock has a friction lock to provide no movement of the stock to the buffer tube.

MAG310-BLK

Out of stock

Out of stock
Magpul Industries MBUS PRO Front Sight - BLACK

Magpul Industries MBUS PRO Front Sight - BLACK

The Magpul Industries MBUS Pro is an all-steel corrosion resistant sight designed to mount directly to the top of your rifle rail to provide for a rugged, dependable flip up sight. A no tool required elevation knob as well as positive locking detents for both the up and down positions enhance user capability.

MAG275-BLK

Out of stock

Out of stock
Magpul Industries MBUS Rear Sight - BLACK - GENII

Magpul Industries MBUS Rear Sight - BLACK - GENII

The Magpul Industries Magpul Back Up Sight. This polymer flip-up adjustable sight is designed to mount on your rifle top rail and is designed with the durability and usability that you have come to expect from Magpul Industries.

MAG248-BLK

Out of stock

Out of stock
Magpul Maglink Magazine Coupler - Gen 2 MOE/ Gen M3 PMAGS

Magpul Maglink Magazine Coupler - Gen 2 MOE/ Gen M3 PMAGS

The Magpul Maglink allows the user to attach two magazines together for quicker, more efficient reloads. Features a two-piece bolt on design that securely holds two 30RD PMAGS on the weapon. Not compatible with first generation PMAG 30, PMAG 20, EMAG, PMAG30G, or PMAG 20LR.

MAG595-BLK

Out of stock

Out of stock
Magpul MOE Carbine Stock - COMMERCIAL - BLACK

Magpul MOE Carbine Stock - COMMERCIAL - BLACK

The Magpul Original Equipment Commercial stock is an economical drop-in option while still maintaining the quality and durability you expect from any Magpul products. The Magpul MOE is a direct replacement for the M4 collapsible buttstock using a commercial size buffer tube.

MAG401-BLK

Out of stock

Out of stock
Magpul MOE SL Carbine Stock - Mil-Spec - Black

Magpul MOE SL Carbine Stock - Mil-Spec - Black

Magpul MOE SL (Slim Line) carbine stock fits Mil-Spec buffer tubes. Features include an improved cheek piece with sloped comb profile, ambidextrous release latches, ambidextrous push-button QD swivel attachment point, 1.25" ambidextrous sling loops, silicon lock spring, and anti-rattle feature minimizes wobble on receiver extension tube.

MAG347-BLK

Out of stock

Out of stock
Magpul MS3 Multi-Mission Sling Gen 2 - BLK

Magpul MS3 Multi-Mission Sling Gen 2 - BLK

The Gen 2 Magpul MS3 Multi-Mission Sling was designed for easy, rapid conversion between a single-point and two-point sling. The MS3 allows the user to exploit the maneuverability of a one point sling, or the stability of a two point sling. Single hand adjustments and quick release make this a very versatile and user friendly platform. Set up for clip-style front and rear sling attachment points.

MAG514-BLK

Out of stock

Out of stock
Magpul MS3 Single QD Sling Gen 2 - BLK

Magpul MS3 Single QD Sling Gen 2 - BLK

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

MAG515-BLK

Out of stock

Out of stock
Magpul MS4 Dual QD Sling Gen 2 - GRY

Magpul MS4 Dual QD Sling Gen 2 - GRY

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

MAG518-GRY

Out of stock

Out of stock
Magpul PMAG .308 25RD Magazine - GEN M3 - BLACK - WINDOW

Magpul PMAG .308 25RD Magazine - GEN M3 - BLACK - WINDOW

The next generation .308 PMAG features numerous improvements over the original .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, snap on dust cover, high quality stainless steel magazine spring, visual window for easy round count inspection, paint pen dot matrix for numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.


Please check restricted shipping zones before ordering.

MAG292-BLK

Out of stock

Out of stock
Magpul PMAG AR15 .223 10RD Magazine - GEN M3 - BLACK

Magpul PMAG AR15 .223 10RD Magazine - GEN M3 - BLACK

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

MAG559-BLK

Out of stock

Out of stock
Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - MCT - WINDOW

Magpul PMAG AR15 .223 30RD Magazine - GEN M3 - MCT - WINDOW

Made in the USA, the next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Similar to the MOE PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Medium Coyote Tan Finish.


Please check restricted shipping zones before ordering.

MAG556-MCT

Out of stock

Out of stock
Magpul PMAG D-60 AR15 .223/5.56mm 60RD Magazine  - BLACK

Magpul PMAG D-60 AR15 .223/5.56mm 60RD Magazine - BLACK

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier storage. Features an easy-to-use loading lever, paint pen dot matrix for easy marking, and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR(TM) MK16/16S, HK(R)416, MR556, M27 IAR, IWI Tavor, and others.

Please check restricted shipping zones before ordering.

MAG576-BLK

Out of stock

Out of stock