Magpul Industries - Manufacturers - Top Gun Supply

The GEN M2 PMAG™ is contructed of a durable, lightweight polymer, designed for use with 5.56 NATO and .223 Remington ammunition in M-16, AR-15 rifles. The new MOE Magazine is identical to the 211 non window model PMAG, however does not come with a dustcover.

Please check restricted shipping zones before ordering.

The PMAG 27 GL9 is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM competition magazine, the PMAG 27 GL9 offers additional capacity without the need for expensive extensions.

Includes a high visibility, controlled-tilt follower, a stainless steel spring, and an easily removable floorplate for cleaning. Also includes a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. Drops free when loaded or unloaded.

The PMAG 27 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip.

Made in U.S.A.

FEATURES

• Compatible with all 9mm double-stack Glock handguns
• Durable, lightweight, and rigid polymer construction
• High visibility, controlled-tilt follower
• Long-life stainless steel spring for corrosion resistance
• Flared, easily removable floor plate
• Dot matrix panel for magazine marking and identification
• Magazine indicator windows on both sides of body at 10, 15, 20, and 27 rounds remaining
• Drops free when loaded or unloaded

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

The Magpul B.A.D. Battery Assist Device is a quick and easy modification to AR-15 / M-16 rifles that allows the shooter access to the bolt catch from the right side of the receiver. This provides easy operation without shifting your grip on the rifle to close the bolt. Includes B.A.D. Lever assembly with Torx wrench.

The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

Fits M-LOK rails, black in color, adjustable length from 6.3" - 10.3" and weighs 11oz.

The Magpul Industries CTR stock replaces the standard M4 stock using the mil-spec tube. This stock has a friction lock to provide no movement of the stock to the buffer tube.

The Magpul CTR (Compact/Type Restricted) - Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability;and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

The Magpul Industries MBUS Pro is an all-steel corrosion resistant sight designed to mount directly to the top of your rifle rail to provide for a rugged, dependable flip up sight. A no tool required elevation knob as well as positive locking detents for both the up and down positions enhance user capability.

The Magpul Industries Magpul Back Up Sight. This polymer flip-up adjustable sight is designed to mount on your rifle top rail and is designed with the durability and usability that you have come to expect from Magpul Industries.

The Gen 2 Magpul MS3 Multi-Mission Sling was designed for easy, rapid conversion between a single-point and two-point sling. The MS3 allows the user to exploit the maneuverability of a one point sling, or the stability of a two point sling. Single hand adjustments and quick release make this a very versatile and user friendly platform. Set up for clip-style front and rear sling attachment points.

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.