Sig Sauer factory Firing Pin Retaining Pin for P220, P226, P229, P229. P224 and P239 stainless steel slide models. This is the spiral or coiled pin found on newer model pistols with the long extractor. For slides with LONG extractors only.

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.

• Hybrid face design
• Preserves factory sear engagement and all mechanical safety values
• Adjustable over-travel eliminates gross movement after the sear is released and reduces trigger travel to reset
• Enhanced Leverage geometry reduces pull weight by 30% with stock springs
• Smoother takeup, sear release and reset sensation
• Optimal 90⁰ sear release
• Supports Voluntary Upgrade rough handling characteristics for assurance and reliability
• Designed for use with the SIG factory trigger bar spring
• Proven reliable and durable for high-volume professional use
• Limited lifetime warranty on materials and workmanship

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

• High hardness and adhesion
• Good chemical resistance
• Good temperature resistance in air
• Relatively low thermal conductivity
• Attractive, golden color

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Super Black Finish

Grayguns Pink+P9 recoil spring for Sig Sauer pistols. A heavy duty P226 9mm spring for those shooting hot 9mm loads.

Also suitable to P226 .40/357 and the P220 .45ACP if using reduced power loads.

Factory Nickel Short Trigger for the Sig P226, P224, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance.

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

SIG factory carbon steel Recoil Spring Guide Rod for P220 and P226 models.

Sig Sauer factory replacement recoil spring for the .22LR conversion kits and the 2 Step P series guns with the .22LR slide assembly.

Sig Sauer factory replacement recoil spring for P227/P220 .45, P226 .40/357, P250 Full Size .40 and P226 X-Five .40S&W.

Sig Sauer factory Firing Pin Retaining Pin for P227, P220, P226, P229, P229. P224 and P239 stainless steel slide models. This is the spiral or coiled pin found on later model pistols. Not for use on older pistols or those that use the solid FPPP or the 2 piece roll pins. For slides with short extractors only.

Sig Sauer factory Hammer for P220, P225, P226, P228, P229 and P245 models, nickel finish. Replaces part #34280325N

Sig Sauer factory Hammer for P220, P225, P226, P228, P229 and P245 models, black super finish.

Sig Sauer factory Hammer Pivot Pin, all P series models. Genuine OEM gun parts ensure proper fit and finish as well as keeping your Sig Sauer pistol reliable.

Sig Sauer factory Hammer Strut for P220, P226, and P229 DAK models.

Sig Sauer factory Hammer Strut Roll Pin (old style) for all models. Pin installs on the base of the Hammer Strut and retains the Mainspring.

Sig Sauer factory Inner Roll Pin for all carbon steel slide models.

Sig Sauer factory Magazine Catch Stop for all models.