SIG factory solid carbon steel Recoil Spring Guide Rod for P220 Carry models.

• Requires use of the new style mainspring 34280454. If you pistol has the long mainspring with a metal seat, you will need to also order the new mainspring. If you have the black plastic mainspring seat, you already have the correct mainspring.
• Any model manufactured prior to 1992 requires current Trigger Bar and Trigger Bar Spring

Sig Sauer factory replacement recoil spring for P220 Carry .45.

Sig Sauer factory Hammer for P220, P226, P229 and P239 DAK models, dark finish. The hammer strut pin is integrated into the hammer.

SIG P220 RECOIL SPRINGS

• Current production has green painted recoil springs rated at 20LBS.
• Earlier models had a black recoil spring rated at 15LBS.
• Super .38 model has a 14LB factory recoil spring.
• Browning BDA .45 has a 14LB factory recoil spring.

SIG P226 RECOIL SPRINGS

• Factory Standard - 9mm - 15LB
• Factory Standard - .40S&W & .357 Sig.: 20LB

*Firing Pin Spring Included

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program.

Specifications and Features

• Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program
• Adjustable over-travel to help reduce reset and take out wasted motion
• Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant
• Designed for use with the SIG factory trigger bar spring
• Minimal over-travel, stops at optimum trigger face angle
• Smoother takeup and release sensation
• Preserves factory sear engagement and mechanical safety values
• Proven reliable and durable for high-volume professional use
• Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

Sig Sauer factory pivot pin for all classic P series models.

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

• X5 All-Round
• P220 (see exceptions below)
• P226
• P228
• P229
• P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

P220 above Serial # 219166

• Models without plastic retainer/base
• Factory Standard 24 LB

Sig P225, P226, P228 and P229

• Factory Standard 24 LB

SIG factory extractor for late model production P220, with the external extractor and stainless steel slides. Also replaces part 34224580 SIG factory extractor for P227, P226 .40/357, P229 .40/357 and P239 .40/357, SIGPRO, P226 9mm (stainless steel slides), P229 9mm and P239 9mm models. New style, short extractor.

Sig Sauer factory Mainspring (Hammer Spring) for all caliber P239 DAK models and P220 (old style) DA/SA.

Sig Sauer factory Outer Roll Pin for all carbon steel slide models.

Sig Sauer factory Slide Catch Lever for P220 models.

Sig Sauer factory Hammer Strut for P220 models. Will not fit older spurred hammers. E2 grip kit hammer strut.

Sig Sauer factory made external extractor for new style P220, P226, P227, P229, P239 and P224 with the long external extractor.

Factory replacement grip panels for your Sig P220 COMPACT.

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

• X5 All-Round
• P220 (see exception below)
• P226
• P228
• P229
• P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.