Shop by:
More
Griffin Armament
more...
Products
Griffin Armament Optimus 6 Suppressor, 5.56mm/6mm, Hub
|
The Optimus® 6 is a 6mm bore additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over “traditional” suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market.
The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP6UM-W
In stock
$599.95
Griffin Armament Optimus 7 Suppressor, .30cal, Hub
|
The Optimus® 7 is a .30cal additive manufactured (3D Printed) suppressor optimized for reducing system back pressure over “traditional” suppressors by way of its high gas flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low back pressure baffle stack to kill flash at a level almost unseen in other low back pressure suppressors available on the market. This suppressor was optimized for .30cal projectiles such as .308 WIN and .300WM.
The Optimus® 7 is made entirely from ultra-strong 17-4 H900 heat treated stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 7 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 7 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP7UM-W
In stock
$699.95
Griffin Armament Alignment Check Rod - .36cal
|
With the appropriate Griffin Armament Suppressor Alignment Check Rod, an end user or gunsmith can verify alignment of the chosen suppressor and mount with the desired host. Installation and use of this tool is simple and should prevent baffle strikes or any unexpected issues once you get to the range. Griffin Armament has gone to great lengths to accommodate a wide variety of thread pitch and caliber options across our silencer mount and adapter products. This gives practically every end user who wishes to suppress their host the opportunity to do so! With this wide range of compatibility comes its own set of issues, the main one being silencer and mount alignment to the host firearm’s bore. To use the Suppressor Check Alignment Rod:
If mount and silencer are in alignment, remove rod and enjoy your suppressed firearm! |
GASACR9
In stock
$69.95
Griffin Armament Alignment Check Rod - .45 cal
|
With the appropriate Griffin Armament Suppressor Alignment Check Rod, an end user or gunsmith can verify alignment of the chosen suppressor and mount with the desired host. Installation and use of this tool is simple and should prevent baffle strikes or any unexpected issues once you get to the range. Griffin Armament has gone to great lengths to accommodate a wide variety of thread pitch and caliber options across our silencer mount and adapter products. This gives practically every end user who wishes to suppress their host the opportunity to do so! With this wide range of compatibility comes its own set of issues, the main one being silencer and mount alignment to the host firearm’s bore. To use the Suppressor Check Alignment Rod:
If mount and silencer are in alignment, remove rod and enjoy your suppressed firearm! |
GASACR45
In stock
$69.95
Griffin Armament Rachet-lok Front Cap, .22 Cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GAA22FC
In stock
$76.00
Griffin Armament Rachet-lok Front Cap, .30 cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GAA30FC
In stock
$76.00
Griffin Armament Rachet-lok Front Cap, .36 Cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GABUSH36FC
In stock
$76.00
Griffin Armament Taper Mount EZ Brake, .30 cal 5/8x24
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ30C5824
In stock
$81.00
Griffin Armament Taper Mount EZ Brake, 9mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ9C1228
In stock
$81.00
Griffin Armament Dual Lok EZ Brake, 7.62mm 5/8x24
|
Constructed of 17-4 PH stainless steel, the DUAL-LOK™ EZ-Brake™ features 3 radial slots which provide effective recoil mitigation. The DUAL-LOK™ EZ-brake™ weighs 2.5 ounces, making it one of the lightest mounts available for the DUAL-LOK™ Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation. |
DLEZ30C5824
In stock
$90.90
Griffin Armament PLAN-A Taper Mount Adapter for 1.375x24 HUB Suppressors
|
The Taper Mount PLAN-A™ adapter provides a Griffin Taper Mount interface for Silencerco® Hybrid™, OMEGA™, and Harvester 338™ as well as DEAD AIR ARMAMENT™ NOMAD™, and other suppressors with mount interface inside diameter threading of 1.375x24. No proprietary tools required. Machined in our Watertown headquarters from billet 17-4 stainless steel, this adapter provides a precision made interface that gives you access to nationally recognized Griffin Taper Mounts and accessories. Precision, durability, and value are at the core of Griffin product design and manufacturing. This product allows you to affordable kit up with the best muzzle devices in the industry.
|
TMA1375x24
In stock
$85.00
Griffin Armament Checkmate HD 22 DT, .22 CAL
|
The new CHECKMATE-HD is a 5.8 ounce 5.7x28 pistol rated rimfire suppressor and utilizes ECO-FLOW baffle technology as well as newly developed CARBON-GARD technology- the subject of a pending patent. The 5.8 ounce, 5.04" overall length suppressor features a 17- 4 heat treated ECO-FLOW baffle system, front cap, and integrated EZ-LOK QD mounting system. The tube is 7075-T6 billet machined and hardcoat anodized for maximum strength.Rating
|
GACMHD22DT-W
In stock
$414.00
Griffin Armament MK2 AMBI Stripped Lower Receiver, BLK
|
The Griffin MK2 Ambi Lower is the ideal foundation for your next rifle build. Precisely machined from high-grade 7075-T6 aluminum to exact tolerances, the MK2 lower is a premium rifle platform offering proper fitment and utility with mil-spec lower components. To enhance durability, the MK2 lower is hardcoat type 3 anodized for superior resistance to surface wear, scuffs, scratches, and discoloration from cleaning solvents and oils. Included with this lower are Griffin's ambi magazine release and ambi bolt catch & release controls offering increased usability for right and left-handed shooters.
|
MK2AL
In stock
$219.95
Griffin Armament ST-3 Thread Sealant
|
This ST-3® family Thread Sealant is a liquid applicant that once applied and allowed to dry, provides a elastic gasket around the threaded component, allowing threads to stay tight during severe vibration. The product not only provides a 2000 psi sealant gasket, but components can be taken apart and re assembled several times with a single application meaning it does not need to be cleaned off and re-applied after every use. To use simply apply a thin film with a Q tip or similar applicator. Allow to air dry for a minimum of an hour. Thread product together and enjoy. After multiple assembly reassembly of the threaded component you will at some point need to brush the thread clean and reapply the process. This half ounce container contains ~50 applications of product. Examples of application for Griffin products:
Do not use on pistol piston retainers or 3 lug rear caps. We recommend Horse Jipe™ 2300° for those applications. |
ST3
In stock
$6.95
Griffin Armament Suppressor Anti Seize
|
2300 degree F rated anti seize lubricant. This anti cease product is the perfect lubricant for thread joints, baffle exteriors on serviceable suppressors, and muzzle device interfaces for all sound suppressors. Now available in affordable small quantities, Griffin has repackaged Lok-Cease 20/20, this industrial product and made it available for the consumer. The half ounce jar accommodates ~ 100 applications. Use of any anti cease product on the aforementioned areas is always encouraged as it will make periodically needed end user maintenance and configuration many times easier. However, this product specifically can withstand extremely high heat and is thus a perfect application for hard use customers. |
HTAS
In stock
$6.95
Griffin Armament DUAL-LOK™ HUB Mount, 1.375x24
|
Griffin Armament is proud to introduce DUAL-LOK™, our newest QD mounting system for rifle suppressors. The DUAL-LOK™ system is comprised from two components, the DUAL-LOK™ Mount or equipped suppressor and the DUAL-LOK™ muzzle device (of your choice). This page is for the DUAL-LOK™ HUB Mount, a 1.375×24 threaded interface. A quality QD system should be accurate, robust, reliable, require minimal training, and be free of wear prone metal on metal teeth or ratchets, thereby guaranteeing a longer trouble free service life with minimal maintenance needed. Griffin’s DUAL-LOK™ QD mounting system was designed around these objectives. What makes this mounting system unique? It is a combination of desirable mechanical features and performance characteristics in a lightweight, compact system. DUAL-LOK™ combines a precision, sealing, and alignment taper interface with a stub ACME thread, and provides ease of secure attachment. A robust wave spring provides a reliable and positive heat-resistant spring action to the redundant locking collar (second locking feature). The locking collar is semi permanently installed to the mount via factory press slpined, stainless steel, taper pins. Since the mount has no wear prone metal on metal sliding actions like many other mounts, there is no need for the operator to disassemble the system. This locking ring includes three anti-rotation splines which ensure the suppressor will not come off inadvertently. The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions, hence the double entendre DUAL-LOK™. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. Substantial efforts are taken in the manufacturing and inspection of the DUAL-LOK™ products to ensure Griffin customers are outfitted with the best QD mounting systems available.
|
DL1375X24
In stock
$195.95