Shop by:
More
Griffin Armament
more...
Products
Griffin Armament Checkmate HD 22 DT, .22 CAL
|
The new CHECKMATE-HD (CAM-LOK) is a 5.8 ounce 5.7x28 pistol rated rimfire suppressor and utilizes ECO-FLOW baffle technology as well as newly developed CARBON-GARD technology- the subject of a pending patent. The 5.8 ounce, 5.04" overall length suppressor features a 17- 4 heat treated ECO-FLOW baffle system, front cap, and integrated EZ-LOK QD mounting system. The tube is 7075-T6 billet machined and hardcoat anodized for maximum strength.Rating
|
GACMHD22CL-W
Out of stock
Griffin Armament Checkmate HD 22 DT, .22 CAL
|
The new CHECKMATE-HD is a 5.8 ounce 5.7x28 pistol rated rimfire suppressor and utilizes ECO-FLOW baffle technology as well as newly developed CARBON-GARD technology- the subject of a pending patent. The 5.8 ounce, 5.04" overall length suppressor features a 17- 4 heat treated ECO-FLOW baffle system, front cap, and integrated EZ-LOK QD mounting system. The tube is 7075-T6 billet machined and hardcoat anodized for maximum strength.Rating
|
GACMHD22DT-W
Out of stock
Griffin Armament Dual-Lok PSR Suppressor, 5.56mm 1/2x28
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for quite some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados. Griffin is reintroducing next generation over the barrel suppressors with the DUAL-LOK PSR suppressor series.
|
GADLPSR556-W
Out of stock
Griffin Armament Dual-Lok Suppressor, 5.56mm 1/2x28
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 5 features the DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL556-W
Out of stock
Griffin Armament Dual-Lok Suppressor, 7.62 5/8x24
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 7 features the patent pending DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL762-W
Out of stock
Griffin Armament DUAL-LOK™ HUB Mount, 1.375x24
|
Griffin Armament is proud to introduce DUAL-LOK™, our newest QD mounting system for rifle suppressors. The DUAL-LOK™ system is comprised from two components, the DUAL-LOK™ Mount or equipped suppressor and the DUAL-LOK™ muzzle device (of your choice). This page is for the DUAL-LOK™ HUB Mount, a 1.375×24 threaded interface. A quality QD system should be accurate, robust, reliable, require minimal training, and be free of wear prone metal on metal teeth or ratchets, thereby guaranteeing a longer trouble free service life with minimal maintenance needed. Griffin’s DUAL-LOK™ QD mounting system was designed around these objectives. What makes this mounting system unique? It is a combination of desirable mechanical features and performance characteristics in a lightweight, compact system. DUAL-LOK™ combines a precision, sealing, and alignment taper interface with a stub ACME thread, and provides ease of secure attachment. A robust wave spring provides a reliable and positive heat-resistant spring action to the redundant locking collar (second locking feature). The locking collar is semi permanently installed to the mount via factory press slpined, stainless steel, taper pins. Since the mount has no wear prone metal on metal sliding actions like many other mounts, there is no need for the operator to disassemble the system. This locking ring includes three anti-rotation splines which ensure the suppressor will not come off inadvertently. The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions, hence the double entendre DUAL-LOK™. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. Substantial efforts are taken in the manufacturing and inspection of the DUAL-LOK™ products to ensure Griffin customers are outfitted with the best QD mounting systems available.
|
DL1375X24
Out of stock
Griffin Armament Optimus Micro, .22 CAL
|
The Optimus Micro re-defines the rimfire class of suppressors by offering the most durable and versatile rimfire suppressor ever designed. Utilizing state of the art manufacturing and heat treated 17-4 stainless steel throughout, the Optimus Micro supports 5.56mm cartridges out of the box using the included 1/2×28 direct thread mount. Interlocking HEDP patented baffle technology provides uncompromising sound performance while ensuring durability and proper orientation. Patent pending dual taper locking front caps ensure the suppressor can be used vigorously without fear of unintentional disassembly. Rating
|
GAOPM-W
Out of stock
Griffin Armament Revolution 9, Modular 36 Cal
|
The original Revolution® 9 & 45 suppressors were the first pistol silencers developed and brought to market with a modular length feature set, and that Griffin innovation inspired all the other modular length pistol suppressors in the US marketplace. The (MOD 4) Revolution® 9 suppressor represents a total redesign around of package of end user feature interaction enhancements, making the suppressor more secure and easier to mount, as well as fast and easy to configure in length, and easy to disassemble, at vastly increased maintenance intervals. The forward extension allows tool-less reconfiguration, and the O-ring biased extension and front cap prevent inadvertent loosening of the extension or cap. The booster housing (mount accessory interface socket) is permanently installed so tightening and loosening the suppressor does not result in loosening of the booster housing. The housing accepts pistons, fixed barrel mounts and spacers, our Griffin developed industry first integrated 3 lug mount, as well as Plan A mounts.
Another major improvement introduced in the MOD 4 generation is the incorporation of Griffin’s patented CARBON-GARD™ baffle technology. This concept, originally debuted in the Checkmate HD suppressor, has applications for pistol suppressors to make cleaning and maintenance of the suppressor easier even after very high round counts. High temp silicon o-rings are positioned at each baffle interface as well as the end cap, blast chamber, and extension tubes to fully seal gases and carbon within the baffle stack. This gas seal prevents lead and carbon fouling from building up between the tube body and the baffle stack, eliminating instances of the baffle core being carbon locked inside of the tube body, a condition that is very annoying for the end user. Revolution® MOD 4 Suppressors ship with an included EZ-LOK™ piston providing a more secure, and rapid mounting system than direct thread. EZ-LOK™ barrel end adapters are available for purchase separately. Rating
|
GAREV9M4-W
Out of stock
Griffin Armament Taper Mount EZ Brake, .30 cal 5/8x24
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ30C5824
Out of stock
Griffin Armament Direct Thread Piston, 9mm 1/2x28
|
Piston are H900 heat treated with a rust inhibitor. Please note, color and color pattern will vary due to the heat treatment.
|
GAR1228
In stock
$78.00
Griffin Armament Dual-Lok PSR Suppressor, 7.62mm 5/8x24
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados.
|
GADLPSR762-W
In stock
$1101.00
Griffin Armament Optimus 6 Suppressor, 5.56mm/6mm, Hub
|
The Optimus® 6 is a 6mm bore additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over “traditional” suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market.
The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP6UM-W
In stock
$599.95
Griffin Armament Dual Lok EZ Brake, 5.56mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the DUAL-LOK™ EZ-Brake™ features 3 radial slots which provide effective recoil mitigation. The DUAL-LOK™ EZ-brake™ weighs 2.5 ounces, making it one of the lightest mounts available for the DUAL-LOK™ Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation. |
DLEZ22C1228
In stock
$90.90
Griffin Armament Optimus 7 Suppressor, .30cal, Hub
|
The Optimus® 7 is a .30cal additive manufactured (3D Printed) suppressor optimized for reducing system back pressure over “traditional” suppressors by way of its high gas flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low back pressure baffle stack to kill flash at a level almost unseen in other low back pressure suppressors available on the market. This suppressor was optimized for .30cal projectiles such as .308 WIN and .300WM.
The Optimus® 7 is made entirely from ultra-strong 17-4 H900 heat treated stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 7 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 7 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP7UM-W
In stock
$699.95
Griffin Armament Rachet-lok Front Cap, .30 cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GAA30FC
In stock
$76.00
Griffin Armament Rachet-lok Front Cap, .36 Cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GABUSH36FC
In stock
$76.00
Griffin Armament Taper Mount EZ Brake, 5.56mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ22C1228
In stock
$81.00
Griffin Armament Taper Mount EZ Brake, 9mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ9C1228
In stock
$81.00