Grayguns, Inc. - Manufacturers - Top Gun Supply

Shop by:

Color
Category

Grayguns, Inc.

more...
Grayguns, Inc.

Products

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

The P22xCT Classic Standard Trigger adds over-travel adjustability to our original design. Utterly indestructible, the P22xCT Classic Standard is machined from tough steel, carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function.

Our intermediate trigger shape optimizes both SA and DA control for optimal control, and is more comfortable than the factory short trigger it replaces. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Will not fit SIG Pro, X5 Allround, P225 / P6, P239 or most SAO models. Also will not fit older P220 with 8mm wide trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

This product was previously referred to as the P-Series Precision Adjustable Intermediate Trigger (P-SAIT).

TRG-SIG-22X-AIC

Out of stock

$39.00

Out of stock
Grayguns Competition Curved Trigger Kit - Sig Sauer P320

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

SIG Sauer® P320 Competition Trigger Kit can now be installed by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit. The kit is specifically designed for guns that have gone through SIG’s Voluntary Upgrade Program. The kit includes the following elements:
  • Precision-ground Grayguns custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns competition sear springs
  • Grayguns competition trigger bar spring
  • Over-travel stop tube
  • Micro-polished, extended safety lever pin

The Grayguns P320 Competition Trigger Kit yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It yields a trigger pull weight of approximately 3.5 to 5 pounds. The kit with included competition sear is designed exclusively for competition or range use only.

SYS-SIG-320-CT

Out of stock

$129.00

Out of stock
Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

Out of stock

$69.00

Out of stock
Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Super Black Finish

GRD-SIG-22C-SB

Out of stock

$25.00

Out of stock
Grayguns HK P30 w/Safety Short Reset System

Grayguns HK P30 w/Safety Short Reset System

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P30 with thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P30 model with a thumb safety, including DA/SA and LEM variations.

The kit works with all variants of the HK P30 with a thumb safety including:

  • P30
  • P30L
  • P30SK

Will not work with CDA LEM 4.1 trigger.

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

SYS-HK-P30-MS

Out of stock

$99.00

Out of stock
Grayguns HK P30, P2000 Short Reset System

Grayguns HK P30, P2000 Short Reset System

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA and LEM variations.

The kit works with all variants of the HK P2000 and P30 models without a thumb safety including:

  • P30
  • P30L
  • P30SK
  • P2000
  • P2000SK

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

SYS-HK-P30-STD

Out of stock

$99.00

Out of stock
Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

SYS-SIG-22X-MSS

Out of stock

$19.00

Out of stock
Grayguns P365 Straight Trigger

Grayguns P365 Straight Trigger

Grayguns introduces the P365AST Straight Trigger. Our team’s goal to optimize length of pull and reduce over travel, while keeping the toe of the trigger no more forward than the original starting position. We succeeded in that goal and more. This UpGray’d trigger now breaks at 90 degrees giving the operator a clean index while providing a wider area of finger placement. This trigger has a new over travel screw that can be adjusted to take out all of your wasted over travel.

Made in the USA from solid bar-stock steel, this trigger is backed by the Grayguns lifetime warranty. The Grayguns P365ST Straight Trigger sets the standard by which all others are judged.

TRG-SIG-365-AST

Out of stock

$99.00

Out of stock
Grayguns Short Reset Trigger (SRT) Kit - Sig Sauer P-Series

Grayguns Short Reset Trigger (SRT) Kit - Sig Sauer P-Series

The custom-designed Grayguns Short Reset Trigger (SRT) Kit incorporates SIG Sauer’s Safety Lever – with permission – and is designed to provide a smooth, short action reset in a drop in kit. The kit reduces the trigger reset travel by about 70 percent*, when using one of our dual adjustable triggers.

The really special part of this kit is the Bruce Gray designed custom sear. It is a bar-stock steel component, classically machined, painstakingly cut and inspected. The sear is hand-finished for the best angle of engagement and release with the factory hammer. The part is heat treated and stoned to provide a very smooth surface. We follow up with a baked-in nickel PTFE coating for a smooth release and outstanding durability.

User feedback indicates many shooters find their follow-up shots are quicker and more accurate with the Grayguns SRT Kit installed in their SIG DA/SA pistols. (See our Fit Guide below.)

Our Grayguns SRT Kit includes:

  • Bruce Gray designed bar-stock custom sear
  • SIG Sauer safety lever
  • Two, 19 pound mainsprings*

Grayguns Short Reset Trigger Trigger Fit Guide

The Grayguns SRT Kit fits modern, SIG Sauer P-Series DA/SA pistols including: P220, P228, P229, P226, P226 X-Five Allround, P227 and most obsolete versions.

SYS-SIG-SRS

Out of stock

$99.00

Out of stock
Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-ST

Out of stock

$89.00

Out of stock
Grayguns Enhanced Trigger Sig Sauer P238 and P938 - PUR

Grayguns Enhanced Trigger Sig Sauer P238 and P938 - PUR

Grayguns specially made enhanced trigger provides an improved design shape, more comfortable feel on your trigger finger and comes in assorted colors to personalize your Sig Sauer P238 or P938. This replacement trigger will fit all variants of the P238 and P938. This is a purple aluminum trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

PX38-PURPLE

In stock

$40.00

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Backwards compatible with all versions of P320 modules, including the standard and X-Series with or without the extended magwell installed.

  • This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDE

In stock

$19.99

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-CT

In stock

$89.00

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

The new Grayguns P320 Competition Trigger System delivers the unequalled smooth feel and hot performance of our custom action work in a cleverly engineered drop-in kit.

Paired with Bruce Gray’s exclusive hybrid trigger design, this is the most advanced drop in competition system available for all post/Voluntary Upgrade P320 models.

The P320 Competition Trigger System is intended for installation by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit.

The kit includes the following exclusive Grayguns elements:

  • Our newly designed hybrid trigger with built in over-travel adjustment
  • Precision-ground custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns original competition sear springs
  • Intermediate competition sear springs
  • Original soft competition trigger bar spring
  • New snappy-reset trigger bar spring
  • Micro-polished, extended safety lever pin

Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces trigger pull weight to suit your preferences, with additional springs provided to yield custom pull weights.
  • Adjustable over-travel, stops at optimum trigger face angle
  • Smoother takeup and clean release sensation, with clean reset
  • Preserves factory sear face engagement height and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. Note – The safety lever spring is no longer needed in the P320, and is not included in the kit.

SYS-SIG-320-AHT

In stock

$149.00

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

  • This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDS

In stock

$19.99

Grayguns Hogue G10 Grips - P226 DA/SA

Grayguns Hogue G10 Grips - P226 DA/SA

Designed with the masters at Hogue, our grips use a miniature version of the highly popular “Piranha” texture. This custom texture is 40 percent more aggressive than standard grips while being smooth enough to carry. These grips provide the form and function you’ve come to expect from Grayguns.

The Grayguns iconic logo – in pewter – is affixed in the grip’s center. The P226 TDA version is designed with an exclusive shape to accommodate both the standard and SIG Legion controls.

GRP-HOG-226-TDA

In stock

$139.00

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Grayguns Fat Guide Rod with Spring - P320 X5 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 X-FIVE - SUPER BLACK Finish

GGGR-320X5-SB

In stock

$32.00