Ed Brown

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 4.25" Comm Model. Suppressor ready. 0.578 x 28 RH threads. Thread protector included.

Ed Brown ambidextrous 1911 tactical thumb safety allows the user to operate the safety right or left handed. The tactical thumb safety is trimmed for carry for better concealment. Minor fitting required. Stainless.

Designed for those who have difficulty depressing the grip safety, the Ed Brown extended beavertail with memory grooves aid the shooter in deactivation of the grip safety as well as better aligning your hand to the centerline of the bore with the axis of your forearm for enhanced recoil control. This grip safety features grooves cut into the raised pad of the safety for positive depression, even for those with thin or small hands. *Frame modification required* - Uses a .250 radius cut on the frame centered on the thumb safety pin hole. Complete installation instructions included. See our beavertail installation jig #886 for an easy way to establish this .250 radius. Series 70 - Blue.

Designed for those who have difficulty depressing the grip safety, the Ed Brown extended beavertail with memory grooves aid the shooter in deactivation of the grip safety as well as better aligning your hand to the centerline of the bore with the axis of your forearm for enhanced recoil control. This grip safety features grooves cut into the raised pad of the safety for positive depression, even for those with thin or small hands. *Frame modification required* - Uses a .250 radius cut on the frame centered on the thumb safety pin hole. Complete installation instructions included. See our beavertail installation jig #886 for an easy way to establish this .250 radius. Series 80 - Blue.

Ed Brown solid barrel bushings are heat treated stainless steel drop-in replacement bushings that will work on most 1911 pistols with little to no fitting. Specs - .581 ID, .699 OD. Designed for 1911 Comm. Models. Stainless.

Ed Brown solid barrel bushings are heat treated stainless steel drop-in replacement bushings that will work on most 1911 pistols with little to no fitting. Specs - .581 ID, .699 OD. Designed for 1911 Govt. Models. Stainless.

Ed Brown Extractors are fully machined, heat-treated 4340 alloy steel barstock for long wear and extended service life. Optimal dimensions and radiused edges ensure reliable feeding and extraction over a long period of use. Minor fitting may be required. Designed for .45ACP Series 70 Fire Control System.

Typical factory firing pins are often weak and subject to failure. Springfield .38 Super and 9mm slides use the oversize diameter pin for heavy loads. At present, Ed Brown is the only manufacturer making the correct size pin for the Springfield .38 Super slides. Dimensions - .075 pin diameter.

Molded polyurethane buffers which mount directly to the guide rod to prevent the metal to metal battering that occurs when the pistol is fired. Package of 6.

Match Grade solid long trigger made form lightweight aluminum with heat treated steel bow. Slightly oversize height for precise hand fitting. Includes stainless steel adjustable overtravel set screw. Designed for single stack frames only. Minor fitting required.

Ed Brown full size 5 inch Government 9mm with single side thumb safety, Gen IV finish, fixed night sights, Chainlink III checkering on the front strap and mainspring housing, and laminate grips. The new Gen 4 finish is the latest evolution of polymer coating technology. Currently in use by several military units, the Gen 4 finish offers the best wear resistance and corrosion protection known to date.

The Ed Brown Executive Target in 38 Super is a limited run pistol from Ed Brown. Brand new and no longer available to us at this time. These pistols feature the new more aggressive Chainlink III checkering, Gen IV coating, adjustable target sights, and a single side thumb safety. The new Gen 4 finish is the latest evolution of polymer coating technology. Currently in use by several military units, the Gen 4 finish offers the best wear resistance and corrosion protection known to date.

The Ed Brown Special Forces Carry 3 is a concealed carry pistol featuring a 4.25" barrel, Ed Brown Bobtail mainspring housing, G10 grips, single side thumb safety and the new, more aggressive Chainlink 3 treatment to the front strap, mainspring housing. All of the features of the full size Special Forces in a Commander sized package. Comes with two magazines, manual, and soft case.

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 4.25" Comm Model.

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 5" Govt Model. Suppressor ready. 0.578 x 28 RH threads. Thread protector included.

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 5" Govt Model.

Match Grade barrel jobs require a precisely made link to complete the job. Ed Brown barrel links are machined from aircraft quality stainless steel bar stock. Dimensions - .278 hole spacing.