Ed Brown

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 5" Govt Model. Suppressor ready. 0.578 x 28 RH threads. Thread protector included.

Ed Brown barrels are machined from T-416 stainless steel bar stock, just like a benchrest rifle barrel. Prior to final rifling, the barrels are stress-relieved and heat-treated to ensure no deficiencies are present. Deep-cut, broached rifling provides superior accuracy with all types of bullets. Barrel dimensions are cut to drop-in tolerances, however due to varying pistol dimensions, installation in some pistols may require very minor material removal which most people can easily do themselves. Includes the bushing, link, and link pin. Designed for 5" Govt Model.

Match Grade barrel jobs require a precisely made link to complete the job. Ed Brown barrel links are machined from aircraft quality stainless steel bar stock. Dimensions - .278 hole spacing.

Designed for those who have difficulty depressing the grip safety, the Ed Brown extended beavertail with memory grooves aid the shooter in deactivation of the grip safety as well as better aligning your hand to the centerline of the bore with the axis of your forearm for enhanced recoil control. This grip safety features grooves cut into the raised pad of the safety for positive depression, even for those with thin or small hands. *Frame modification required* - Uses a .250 radius cut on the frame centered on the thumb safety pin hole. Complete installation instructions included. See our beavertail installation jig #886 for an easy way to establish this .250 radius. Series 70 - Stainless.

Ed Brown solid barrel bushings are heat treated stainless steel drop-in replacement bushings that will work on most 1911 pistols with little to no fitting. Specs - .581 ID, .699 OD. Designed for 1911 Govt. Models. Stainless.

Typical factory firing pins are often weak and subject to failure. Springfield .38 Super and 9mm slides use the oversize diameter pin for heavy loads. At present, Ed Brown is the only manufacturer making the correct size pin for the Springfield .38 Super slides. Dimensions - .075 pin diameter.

Ed Brown Rebuild Kit includes every pin and spring needed to rebuild or complete a 1911 style frame. Includes Mainspring Cap, Mainspring Housing Pin Retainer, Hammer Strut Pin, Hammer Pin, Sear Pin, Mainspring Cap Pin, Magazine Catch Lock, Safety Lock Plunger Assembly, Barrel Link Pin, Ejector Pin, Mainspring Housing Pin, Mainspring, and Mag Catch Spring. Blue.

Ed Brown 1911 Recoil Spring for Govt. Model, 16.5 LB.

Fully machined barstock hammers with a beautiful fully chamfered outside. Commander style spur, lowered strut pin hole to reduce full-cock spring pressure, and precisely machined .020-.022 hammer hooks. Made from heat treated alloy or stainless steel. Combine with #874 Perfection Sear for a phenomenal trigger job. Minor fitting required. Blue.

Ed Brown Slide Stops are fully forged and beautifully chamfered for positive last round engagement and tight, long lasting lockup with custom barrels. Drops in to most 1911's. May require minor fitting. Ledge style features a slightly extended ledge for easy activation. Blue.

Match Grade solid short trigger made form lightweight aluminum with heat treated steel bow. Slightly oversize height for precise hand fitting. Includes stainless steel adjustable overtravel set screw. Designed for single stack frames only. Minor fitting required.

The Ed Brown Classic Custom is the flagship, top of the line handgun from Ed Brown. Beautiful bluing with mirror polished slide flats, adjustable target sights, serrated slide top, checkered front strap, oversized and extended magazine release, checkered front strap and mainspring housing and a single side thumb safety.

The EVO CCO Lightweight is the ultimate carry gun! Optimized for 9mm, the EVO-CCO9-LW retains 100% 1911 controls and handling characteristics. Built on a lightweight aluminum compact (Officer's) frame, and combined with a round butt housing and concealed carry grip safety for maximum concealability. Includes modern improvements such as snakeskin treatment on forestrap and mainspring housing, the new external extractor, easy-to-change front sight, smaller "Tactical Edge" rear sight, bull barrel, and a flat wire recoil spring system. The slide is shortened to 4" and thinned substantially for weight reduction, and includes a unique 7-top custom cut, with special front and rear serrations. A recessed slide stop and slim grips completes the package. Ships with tho 8rnd magazines.

The KC9 pays homage to the Kobra Carry, which took the industry by storm nearly 20 years ago, and has now become the iconic standard for a high end custom 1911, with its revolutionary Ed Brown Bobtail®, stainless steel base, and Snakeskin treatment. Optimized for the 9mm caliber, the KC9 inherits those same characteristics, yet is smaller, thinner, and lighter. The KC9 retains 100% 1911 controls and handling characteristics, and makes use of standard 1911 magazines, and standard 1911 grips with the Ed Brown Bobtail® cut. Some parts were completely re-designed to take advantage of modern improvements such as the new external extractor, easy-to-change front sight, smaller ledge-style rear sight, 4" bull barrel, and a flat wire recoil spring system. The re-engineered slide has been shortened to 4", thinned substantially for weight reduction, and includes a unique 7-top custom cut, Black Gen4 finish with special front and rear serrations. A recessed slide stop completes the package, making for the perfect custom 9mm 1911.

The KC9 pays homage to the Kobra Carry, which took the industry by storm nearly 20 years ago, and has now become the iconic standard for a high end custom 1911, with its revolutionary Ed Brown Bobtail®, stainless steel base, and Snakeskin treatment. Optimized for the 9mm caliber, the KC9 inherits those same characteristics, yet is smaller, thinner, and lighter. The KC9 retains 100% 1911 controls and handling characteristics, and makes use of standard 1911 magazines, and standard 1911 grips with the Ed Brown Bobtail® cut. Some parts were completely re-designed to take advantage of modern improvements such as the new external extractor, easy-to-change front sight, smaller ledge-style rear sight, 4" bull barrel, and a flat wire recoil spring system. The re-engineered slide has been shortened to 4", thinned substantially for weight reduction, and includes a unique 7-top custom cut, with special front and rear serrations. A recessed slide stop completes the package, making for the perfect custom 9mm 1911.

The Ed Brown Kobra Carry is a concealed carry pistol featuring a 4.25" barrel, Ed Brown Bobtail mainspring housing, single side thumb safety, and the Ed Brown Snakeskin treatment to the front strap, mainspring housing. All of the features of the full size Kobra in a Commander sized package. The new Gen 4 finish is the latest evolution of polymer coating technology. Currently in use by several military units, the Gen 4 finish offers the best wear resistance and corrosion protection known to date. Comes with 2 mags.

The legendary Ed Brown Kobra Carry is a concealed carry pistol featuring a 4.25" barrel, the Ed Brown Bobtail mainspring housing, single side thumb safety and the Ed Brown Snakeskin treatment to the front strap, mainspring housing and the slide. Comes with 2 mags, manual and soft case.

Full size 5 inch Government model Ed Brown Kobra stainless steel with single side thumb safety, fixed night sights, Ed Brown snakeskin treatment on the front strap and mainspring housing. Comes with 2 mags, manual and soft case.