Ed Brown

Products

Ed Brown 1911 Extractor - Series 80 - .40/10mm

Ed Brown 1911 Extractor - Series 80 - .40/10mm

Ed Brown Extractors are fully machined, heat-treated 4340 alloy steel barstock for long wear and extended service life. Optimal dimensions and radiused edges ensure reliable feeding and extraction over a long period of use. Minor fitting may be required. Designed for .40 S&W/10mm Series 80 Fire Control System.

EB-1300

In stock

$29.95

Ed Brown 1911 Firing Pin - Titanium - .38/9mm/10mm

Ed Brown 1911 Firing Pin - Titanium - .38/9mm/10mm

Typical factory firing pins are often weak and subject to failure. The 825-T is precision built from titanium, and hardened for maximum strength and increased shock resistance. Lightweight titanium makes for faster ignition by lowering the lock time. Fits 1911's with series 70 or 80 Fire Control System, also any Brown, Baer, or Caspian slides. Dimensions - .065 pin diameter.

EB-825-T

In stock

$19.95

Ed Brown 1911 Firing Pin Stop - Blue

Ed Brown 1911 Firing Pin Stop - Blue

High Tolerance, heat treated alloy steel firing pin stop for all 1911 pistol types. Made to max width tolerance for a snug fit with the extractor. Designed for Series 70 Fire Control System. Blue. *Will fit Series 80 guns with slight modification*

EB-820

In stock

$12.95

Ed Brown 1911 Firing Pin Stop - Stainless

Ed Brown 1911 Firing Pin Stop - Stainless

High Tolerance, heat treated alloy steel firing pin stop for all 1911 pistol types. Made to max width tolerance for a snug fit with the extractor. Designed for Series 70 Fire Control System. Stainless. *Will fit Series 80 guns with slight modification*

EB-820-S

In stock

$12.95

Ed Brown 1911 Frame Rebuild Kit - Govt. - Stainless

Ed Brown 1911 Frame Rebuild Kit - Govt. - Stainless

Ed Brown Rebuild Kit includes every pin and spring needed to rebuild or complete a 1911 style frame. Includes Mainspring Cap, Mainspring Housing Pin Retainer, Hammer Strut Pin, Hammer Pin, Sear Pin, Mainspring Cap Pin, Magazine Catch Lock, Safety Lock Plunger Assembly, Barrel Link Pin, Ejector Pin, Mainspring Housing Pin, Mainspring, and Mag Catch Spring. Stainless.

EB-814-S

In stock

$19.95

Ed Brown 1911 Oversize Govt. Barrel Bushing - Stainless

Ed Brown 1911 Oversize Govt. Barrel Bushing - Stainless

Ed Brown solid barrel bushings are heat treated stainless steel replacement bushings that will work on most 1911 pistols. These oversized versions require gunsmith fitting. Specs - .575 ID, .705 OD. Designed for 1911 Govt. Models. Stainless.

EB-833-M

In stock

$21.95

Ed Brown 1911 Sear - Perfection

Ed Brown 1911 Sear - Perfection

For the best possible trigger pull, the Ed Brown Perfection Sear is computer designed and fully machined from top quality 4340 barstock steel. Designed to match perfectly with the #896 and #897 Hammer with the least amount of hand labor for a true match grade trigger job.

EB-874

In stock

$32.95

Ed Brown 1911 Slide Stop, .45ACP - Blue

Ed Brown 1911 Slide Stop, .45ACP - Blue

Ed Brown Slide Stops are fully forged and beautifully chamfered for positive last round engagement and tight, long lasting lockup with custom barrels. Drops in to most 1911's. May require minor fitting. Blue.

EB-810

In stock

$59.95

Ed Brown Magwell Housing - 1911 Govt/Comm - Stainless

Ed Brown Magwell Housing - 1911 Govt/Comm - Stainless

Ed Brown mainspring housing with extended magwell for increased speed during magazine changes. Two-piece design allows for easy assembly and removal of the magwell in seconds. 25LPI checkering. Stainless.

EB-819F25

In stock

$84.95

Ed Brown Magwell Housing - 1911 Officer's - Blue

Ed Brown Magwell Housing - 1911 Officer's - Blue

Ed Brown mainspring housing with extended magwell for increased speed during magazine changes. Two-piece design allows for easy assembly and removal of the magwell in seconds. 25LPI checkering. Blue. For Officer framed 1911's.

EB-81825-OF

In stock

$84.95

Ed Brown Magwell Housing - 1911 Officer's - Stainless

Ed Brown Magwell Housing - 1911 Officer's - Stainless

Ed Brown mainspring housing with extended magwell for increased speed during magazine changes. Two-piece design allows for easy assembly and removal of the magwell in seconds. 25LPI checkering. Stainless. For Officer framed 1911's.

EB-81925-OF

In stock

$84.95

Ed Brown Recoil Spring Guide Rod - 1911 Govt - Blue

Ed Brown Recoil Spring Guide Rod - 1911 Govt - Blue

Ed Brown replacement guide rod for your factory 5" government 1911 in the standard configuration. Made from heat treated steel.

EB-882-STD

In stock

$16.95

Ed Brown 1911 3-Hole Match Trigger -  Long

Ed Brown 1911 3-Hole Match Trigger - Long

Match Grade classic three hole design long trigger made form lightweight aluminum with heat treated steel bow. Slightly oversize height for precise hand fitting. Includes stainless steel adjustable overtravel set screw. Designed for single stack frames only. Minor fitting required.

EB-1001

In stock

$21.95

Ed Brown 1911 Beavertail Grip Safety W/ Memory Groove - Series 70 - Blue

Ed Brown 1911 Beavertail Grip Safety W/ Memory Groove - Series 70 - Blue

Designed for those who have difficulty depressing the grip safety, the Ed Brown extended beavertail with memory grooves aid the shooter in deactivation of the grip safety as well as better aligning your hand to the centerline of the bore with the axis of your forearm for enhanced recoil control. This grip safety features grooves cut into the raised pad of the safety for positive depression, even for those with thin or small hands. *Frame modification required* - Uses a .250 radius cut on the frame centered on the thumb safety pin hole. Complete installation instructions included. See our beavertail installation jig #886 for an easy way to establish this .250 radius. Series 70 - Blue.

EB-867

In stock

$38.95

Ed Brown 1911 Extended Tactical Thumb Safety - Stainless

Ed Brown 1911 Extended Tactical Thumb Safety - Stainless

Ed Brown 1911 extended tactical thumb safety is trimmed for carry for better concealment. Minor fitting required. Stainless.

EB-891-T

In stock

$43.95

Ed Brown 1911 Extractor - Series 70 - .45ACP

Ed Brown 1911 Extractor - Series 70 - .45ACP

Ed Brown Extractors are fully machined, heat-treated 4340 alloy steel barstock for long wear and extended service life. Optimal dimensions and radiused edges ensure reliable feeding and extraction over a long period of use. Minor fitting may be required. Designed for .45ACP Series 70 Fire Control System.

EB-1301

In stock

$29.95

Ed Brown 1911 Sear - Standard

Ed Brown 1911 Sear - Standard

High quality sear for any 1911. Machine-cut from 4340 Alloy steel assures positive sear/hammer engagement for a longer-wearing, cleaner breaking trigger. Minor fitting required. Recommend #951 Sear Jig for fitting.

EB-812

In stock

$21.95

Ed Brown Recoil Spring Guide Rod - 1911 Comm - Blue

Ed Brown Recoil Spring Guide Rod - 1911 Comm - Blue

Ed Brown replacement guide rod for your factory commander 1911 in the standard configuration. Made from heat treated steel.

EB-882-CMD

In stock

$16.95