Shadow Systems - Manufacturers - Top Gun Supply

This Shadow Systems trigger incorporates characteristics of a premium flat-faced trigger in a design that is ready for daily carry and heavy-duty use. This trigger will improve the shoot-ability of the gun under stress without sacrificing safety.

• Safety: The trigger safety is INTACT, and this is a drop safe trigger. The typical standard for a drop test is 1 meter (3.3 feet), muzzle down. We have done several drops in our testing from as high as 22 feet.
• Reliability: Shadow Systems triggers don’t fall apart. Some aftermarket triggers have a history of crumbling under pressure. We have triggers with over 15,000 rounds on them, and they aren’t expected to falter anytime soon. The Shadow Systems triggers survive because our set screws are properly torqued and lock-tited when they leave. There are now thousands of Shadow triggers out there. To-date, we’ve had only 2 come back with an issue.
• Flat Faced Configuration: What about this flat faced business? Even if you have never been interested in flat-faced triggers (most of us started out that way), you owe it to yourself to try one. There is no question that for most shooters, the flat faced trigger gives a crisper, more controlled feel to the trigger. It also makes it easier to “shoot to reset” which most people regard as the best way to break clean, accurate shots with a modern DAO/Safe-action design.
• Our triggers are all business: We use a durable, matte black anodize finish and aggressively chamfer the edges to avoid wearing on your finger in long shooting sessions. The reset point is designed to be shorter and crisper than a factory trigger but not so insanely short as to make your gun unsafe for daily carry, threat management, and trigger control under stress.

Kit Includes:

Shadow Systems Elite Trigger
Trigger Bar
Trigger Housing
Trigger Spring
TTI Ultimate Connector

Compatible Models: Gen 3 and Gen 4 Glock Pistols in 9mm, .40, or .357

Shadow Systems realized it was time for an improvement over the stock Glock extractor, without the relatively high price of a billet. MIM technology has improved dramatically in recent years, in particular, the possibility of using new materials. Since so many customers loved their machined billet 17-4 stainless steel extractor, they decided their MIM extractor should use this same material.

What you get with the Enhanced LCI High-Reliability Extractor is:

• Improved materials and part density over stock MIM extractor
• Improved claw geometry for consistent 3 o’clock ejection and no brass to the face
• Higher dimensional consistency
• Enhanced LCI area for a greater tactile response when choosing enhanced LCI variants

Shadow Systems realized it was time for an improvement over the stock Glock extractor, without the relatively high price of a billet. MIM technology has improved dramatically in recent years, in particular, the possibility of using new materials. Since so many customers loved their machined billet 17-4 stainless steel extractor, they decided their MIM extractor should use this same material.

What you get with the Enhanced LCI High-Reliability Extractor is:

• Improved materials and part density over stock MIM extractor
• Improved claw geometry for consistent 3 o’clock ejection and no brass to the face
• Improved finish when choosing bronze TiCN finish
• Higher dimensional consistency
• Enhanced LCI area for a greater tactile response when choosing enhanced LCI variants

The compact-sized MR920 Combat took its inspiration from its predecessor, the MR918 Combat. The DNA of the pistol is the same as the MR918, but there have been some significant changes to the features and function which make this pistol work for more people. The features and price point of the MR920 Combat model make it the perfect EDC pistol.

The MR918’s frame set a new benchmark for low recoil and controllability in rapid-fire. The MR920 draws many of its design cues from the MR918, but the dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our frame is a ground-up Shadow Systems design, not a rebrand of another frame already on the market. Our tooling uses new technology to wrap more texture around the curves of the frame and put the grip in places not normally seen on production guns.

The slide and barrel are machined in-house in Plano, TX. Barrels are 1-10″ conventionally rifled 416R stainless steel. Barrels are coated in super hard Bronze Titanium Carbo-nitride or Black Nitride. Slides are machined from 17-4 PH stainless steel and coated in Nitride.

Slides feature front and rear directional serrations. These serrations provide excellent traction when manipulating the slide, but are relatively frictionless when drawing the pistol from a holster. The MR920 features deeply recessed front serrations and corner chamfers. This thinned front profile gives greater control and reduces the difficulty of inserting the pistol into a holster, particularly a partially collapsed IWB holster.

Includes 2 magazines & zippered soft case

Must ship to a U.S. FFL dealer

The MR920 features Shadow Systems’ new patent-pending optic mounting system.

The biggest news in this release is our new patent-pending universal optic mount cut. By redesigning internal slide components, we relocated portions of the operating system allowing three key attributes:

• The strongest, deepest screw placement in the industry
• Direct optic mounting of multiple brands without intervening adapter plates
• Extremely low optic placement permitting most optics to co-witness with typical iron sights

No past designs have combined all three of these game-changing attributes. The MR920 optic cut accommodates Trijicon RMR and SRO, Holosun 507c and 508t, Leupold Deltapoint Pro, Vortex Viper, and TruGlo Tru-Tec.

Because the MR920 is a Universal Optic Mount Pistol, it will likely accommodate additional brands and optics; testing for optic compatibility is still ongoing. The new system provides versatility without compromise and even exceeds the strength of past Shadow Systems mounts that had a dedicated Trijicon RMR footprint machined into the slide.

The slide and barrel are machined in-house in Plano, TX. Barrels are 1-10″ conventionally rifled 416R stainless steel. Our barrels are coated in super hard Bronze Titanium Carbo-nitride or Black Nitride. Slides are machined from 17-4 PH stainless steel and coated in Nitride.

Slides feature front and rear directional serrations. Elite models also feature window cuts, top serrations, and additional slide machining. These serrations provide excellent traction when manipulating the slide, but are relatively frictionless when drawing the pistol from a holster. The MR920 features deeply recessed front serrations and corner chamfers. This thinned front profile gives greater control and reduces the difficulty of inserting the pistol into a holster, particularly a partially collapsed IWB holster.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

Must ship to a U.S. FFL dealer

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has a spiral threaded bronze barrel.

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has an unthreaded spiral bronze barrel.

The MR920 features Shadow Systems’ new patent-pending optic mounting system.

The biggest news in this release is our new patent-pending universal optic mount cut. By redesigning internal slide components, we relocated portions of the operating system allowing three key attributes:

• The strongest, deepest screw placement in the industry
• Direct optic mounting of multiple brands without intervening adapter plates
• Extremely low optic placement permitting most optics to co-witness with typical iron sights

No past designs have combined all three of these game-changing attributes. The MR920 optic cut accommodates Trijicon RMR and SRO, Holosun 507c and 508t, Leupold Deltapoint Pro, Vortex Viper, and TruGlo Tru-Tec.

Because the MR920 is a Universal Optic Mount Pistol, it will likely accommodate additional brands and optics; testing for optic compatibility is still ongoing. The new system provides versatility without compromise and even exceeds the strength of past Shadow Systems mounts that had a dedicated Trijicon RMR footprint machined into the slide.

The slide and barrel are machined in-house in Plano, TX. Barrels are 1-10″ conventionally rifled 416R stainless steel. Our barrels are coated in super hard Bronze Titanium Carbo-nitride or Black Nitride. Slides are machined from 17-4 PH stainless steel and coated in Nitride.

Slides feature front and rear directional serrations. Elite models also feature window cuts, top serrations, and additional slide machining. These serrations provide excellent traction when manipulating the slide, but are relatively frictionless when drawing the pistol from a holster. The MR920 features deeply recessed front serrations and corner chamfers. This thinned front profile gives greater control and reduces the difficulty of inserting the pistol into a holster, particularly a partially collapsed IWB holster.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

Must ship to a U.S. FFL dealer

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has a spiral threaded bronze barrel and a long slide.

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has an unthreaded spiral bronze barrel and a long slide.

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. This highly improves accuracy! Threaded to allow the use of a suppressor, compensator, or other accessories.

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
DLC (Diamond-Like Carbon) Black Finish
1/2X28 Threaded
Thread Protector Included

Compatible Gun Models Include: Shadow Systems MR918 Elite, Shadow Systems MR918 Combat, Glock 19 (Gen3, Gen4, and Gen5 G19)

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. This highly improves accuracy! Threaded to allow the use of a suppressor, compensator, or other accessories.

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
TiCN (Titanium CarboNitride) Bronze Finish
1/2X28 Threaded
Thread Protector Included

Compatible Gun Models Include: Shadow Systems MR918 Elite, Shadow Systems MR918 Combat, Glock 19 (Gen3, Gen4, and Gen5 G19)

The Shadow Systems Match Barrel for MR918 has a spiral fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tight in critical lock up areas. This highly improves accuracy!

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
Rose Gold PVD Finish
1/2X28 Threaded
Thread Protector Included

Compatible Gun Models Include: Shadow Systems MR918 Elite, Shadow Systems MR918 Combat, Glock 19 (Gen3, Gen4, and Gen5 G19)

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. This highly improves accuracy!

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
TiCN (Titanium CarboNitride) Bronze Finish

Compatible Gun Models Include: Glock 17 (Gen3, Gen4, and Gen5 G19)

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. This highly improves accuracy!

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
DLC (Diamond-Like Carbon) Black Finish

Compatible Gun Models Include: Shadow Systems MR918 Elite, Shadow Systems MR918 Combat, Glock 19 (Gen3, Gen4, and Gen5 G19)

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. This highly improves accuracy!

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
TiCN (Titanium CarboNitride) Bronze Finish

Compatible Gun Models Include: Shadow Systems MR918 Elite, Shadow Systems MR918 Combat, Glock 19 (Gen3, Gen4, and Gen5 G19)

Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing G17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled and spiral-fluted.

The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.*