Shadow Systems - Manufacturers - Top Gun Supply

Designed with officers and servicemembers in mind, the full-sized DR920 is a duty-ready pistol with features that are anything but basic. Designed to work with existing G17 holsters, magazines, and gear. The DR920 frame features interchangeable backstraps to allow a shooter to adjust the grip angle to fit their natural point of aim. The extended beavertail and aggressive trigger guard undercut provide unmatched recoil control, allowing quick, accurate follow-up shots. The frame’s wrap-around grip texture is aggressive enough to keep the gun firmly in the shooter’s grip without being uncomfortable for daily wear. The DR920 slide is designed for manipulation under stress, with directional serrations in the front and rear (as well as topside on some models) and a thinned profile at grasping locations. The match-grade barrel is conventionally rifled and spiral-fluted.

The drop-safe, flat-faced aluminum trigger has a 4.5-5.0 lbs trigger pull and a crisp, tactile reset. Optic cut models allow shooters to mount the mini red dot optic of their choosing. The optic cut on the DR920 can accommodate most major brands of RDS optics directly mounted to the slide, without intervening plates or adapters.*

Must ship to a U.S. FFL dealer

The DR920P is a full sized, 17+1 pistol with an integrated compensator built into the barrel. The built-in compensator does not make use of a threaded barrel, making the DR920P compliant in many jurisdictions that have threaded-barrel-bans.

The DR920P’s comp and slide are machined to give a single-piece appearance, while the novel design allows for rapid removal and attachment of the comp for cleaning. The patent-pending integrated compensator aligns automatically without the need for set screws or other friction devices. The DR920P’s front sight is mounted directly on top of the comp, for faster shot-to-shot tracking.

The DR920P, which fits G34 holsters, comes complete with features customers have come to expect from Shadow Systems, including an aggressively textured frame with interchangeable backstraps that adjust the point of aim, an extended beavertail, and a textured recoil control ledge. The drop-safe and carry-safe flat faced trigger has a 4.5-5 lbs pull weight with a crisp, tactile reset. The match-grade, spiral-fluted barrel features the patent-pending comp attachment system, which utilizes an easy-to-detach pin system to mount the compensator.

Must ship to a U.S. FFL dealer

The NEW Shadow Systems Thread-On Compensator is designed to interface perfectly with our existing MR920, DR920, and XR920 slide designs. The compensator will significantly improve shot-to-shot times and lessen felt recoil. Our clamping system is rock solid yet avoids the common issue of damage to the threaded section of your barrel. The conservatively designed port size ensures reliability with full power ammunition and limits muzzle blast to the sides of the pistol.

The compact-sized MR920 Combat took its inspiration from its predecessor, the MR918 Combat. The DNA of the pistol is the same as the MR918, but there have been some significant changes to the features and function which make this pistol work for more people. The features and price point of the MR920 Combat model make it the perfect EDC pistol.

The MR918’s frame set a new benchmark for low recoil and controllability in rapid-fire. The MR920 draws many of its design cues from the MR918, but the dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our frame is a ground-up Shadow Systems design, not a rebrand of another frame already on the market. Our tooling uses new technology to wrap more texture around the curves of the frame and put the grip in places not normally seen on production guns.

The slide and barrel are machined in-house in Plano, TX. Barrels are 1-10″ conventionally rifled 416R stainless steel. Barrels are coated in super hard Bronze Titanium Carbo-nitride or Black Nitride. Slides are machined from 17-4 PH stainless steel and coated in Nitride.

Slides feature front and rear directional serrations. These serrations provide excellent traction when manipulating the slide, but are relatively frictionless when drawing the pistol from a holster. The MR920 features deeply recessed front serrations and corner chamfers. This thinned front profile gives greater control and reduces the difficulty of inserting the pistol into a holster, particularly a partially collapsed IWB holster.

Includes 2 magazines & zippered soft case

Must ship to a U.S. FFL dealer

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has an unthreaded spiral bronze barrel.

Must ship to a U.S. FFL dealer

The MR918 set a new benchmark for low recoil and controllability in rapid-fire. The dust cover now includes a recoil control ledge for the support hand thumb. This control point further reduces muzzle flip in rapid-fire. The frame of the MR920 continues to feature the NPOA backstrap system which adjusts the ANGLE of the backstrap to match the shooter’s natural point of aim. The pistol system includes three backstraps, a removable magazine well, and a backstrap removal tool for your convenience.

Our pistols are built for reliability and performance first. We added the universal optic mount feature to the MR920 to make your life easier. Our triggers are improved over a stock trigger, but leave internal safeties fully intact and use stock weight springs. You can expect smooth take-up and a super crisp break at 4.0-4.5 lbs.

This pistol also has a spiral threaded bronze barrel and a long slide.

Must ship to a U.S. FFL dealer

The Shadow Systems Match Barrel for MR918 has a straight fluted pattern that reduces the weight of the barrel while adding somewhere for dirt and debris to exit when cycling. It is precision machined to drop-in more easily and fits tights in critical lock up areas. Threaded to allow the use of a suppressor, compensator, or other accessories.

All of our barrels are 100% Made in the USA and are custom designed from U.S. sourced materials.

416R Stainless Steel, 1/10″ Broach Cut Rifling – Safe with lead bullets.
TiCN (Titanium CarboNitride) Bronze Finish
1/2X28 Threaded
Thread Protector Included

Compatible Gun Models Include: Glock 17 (Gen3 & Gen4)

CR920 Magazine. Compatible with CR920, the Shadow Systems subcompact pistol.

13-round Capacity, Extended Basepad.

Please check restricted shipping zones before ordering.