SUPPRESSORS
Shop by:
 More
|
Your results are being filtered by:
- Category -> NFA
Remove Filters
Products
RidgeBack Defense Rhodie 6, Inconel, 6mm Cal
|
The RHODIE 6 is Ridgeback Defense Co.’s high-performance suppressor built for 5.56 NATO and 6mm platforms. Engineered to deliver top-tier sound suppression with low back pressure and a deep tone, the RHODIE 6 is available is being released in Inconel followed by Titanium in April 2026 —giving you the option to prioritize weight or extreme durability. Compact and versatile, this suppressor is ideal for 10.3” barrel lengths and up, offering reliable suppression in both moderate and heavy-use scenarios. Whether you’re pushing rounds through a 5.56 SBR or a high-velocity 6mm carbine, the RHODIE 6 offers elite suppression, low gas blowback, and the rugged reliability Ridgeback is known for. ALL SUPPRESSORS HAVE A LIFETIME NO QUESTIONS ASKED WARRANTY |
RD6BLK
Out of stock
SilencerCo Velos LBP 7.62 w/ Muzzle Break
|
The Velos LBP uses a low back-pressure technology to reduce overall blowback while maintaining impressive sound suppression. The Velos LBP is constructed of a 3D printed inconel 625 core fully welded to 17-4 stainless steel front and rear modules, making this product unlike anything else on the market. It is also full-auto rated and the most durable suppressor SilencerCo has ever made. Ships with an Internal Charlie Flash Hider Front Cap, a Charlie ASR mount,ASR Muzzle Device, a spanner wrench, and a Charlie tool.
|
SU5419
Out of stock
Tuna Cans FAT 9 (6 Baffle), Aluminum
|
The Tuna Cans FAT9 is a lightweight, compact 9mm suppressor designed for versatility across pistol, PCC, and select rifle platforms. Machined from aero-grade 7075 aluminum, the FAT9 keeps weight to a minimum while maintaining strength where it counts. With a 3” blaster chamber that can hold big mounts like TRI lugs and piston boosters and a .399 bore, 1.625″ OD, and 6-baffle stack, the FAT9 delivers reliable performance in a compact footprint. Measuring 6.75 inches and weighing just 7.6 oz, it’s an excellent option for shooters who want balance, reduced front-end weight, and a straightforward design that’s easy to live with. The FAT9 is rated for common pistol calibers and also supports .300 Blackout and 8.6 Blackout on appropriate platforms, making it a flexible suppressor for mixed-use setups. 1.375×24 standard TPI Hub Threaded ( DOES NOT COME WITH A MOUNT)
|
20217
Out of stock
YHM Phantom 22 Suppressor
|
The rear of the blast chamber serves as the takedown tool for the muzzle cap, which means you will always have the disassembly tool when you need it. It features a shielded interlocking baffle stack made from heat treated 17-4 stainless steel, and each baffle has indexing tabs to ensure proper orientation for optimum performance. The outer assembly consists of 2 parts. The 7075-T6 aluminum blast chamber bears the serial number, and the 6061-T6 tube houses the baffle stack. The blast chamber features a stainless steel -28 thread insert to prolong the life of the mounting threads. A stylish aluminum muzzle cap holds everything together. Thanks to the combination of lightweight aluminum and strong stainless steel, the Phantom .22 is able to handle rounds up to 5.7x28mm while weighing a mere 4 ounces.
|
YHM-4380
Out of stock
Huxwrx Flow 22Ti Suppressor BLK
|
The FLOW 22 Ti is the lightest and quietest Flow-Through suppressor to come from HUXWRX Safety Co. Completely 3D-printed in Grade 5 Titanium, the FLOW 22 Ti is lightweight, versatile, and extremely durable. Built with the latest advancements on our patented and proven Flow-Through technology, it effectively delivers toxic fume mitigation, improved sound performance, and increased accuracy with excellent repeatability. This suppressor comes direct thread ready in 1/2x28, offers a cleaner shooting experience, and requires no general modifications to the weapon system. The FLOW 22 Ti is full-auto rated and cross platform compatible for 17 HMR, 22 LR, 22 Magnum, and 5.7 with no barrel length restrictions. This suppressor is ideal for competition shooters, hunting enthusiasts, and individuals seeking a top-tier rimfire build. |
3076
Out of stock
Jk Armament 105 CCX, 9mm
|
So lightweight it doesn’t need a booster! Transitions from range use to concealed carry use The only ultra-compact, 9mm silencer that’s durable enough to train with every day Easily converts to a great rimfire suppressor by swapping the End Cap.
The JK 105 CCX 9MM is the first and only 9mm suppressor capable of going from the shooting range to your concealed carry rig! Its so compact and lightweight that it runs on 9mm pistols without a booster! The CCX is considered a micro, ultralight pistol suppressor and is part of our special use line. Half the size and weight of the competition, our special use suppressors perform best when run wet.
Ratings w/ no minimum barrel length
Rating minimum barrel length 16''
|
JK-105CCX9
Out of stock
PTR Spiritus 5.56, 1/2"-28, Inconel
|
The VENT Spiritus 5.56i is a must-have for firearm enthusiasts and professionals seeking unmatched performance, durability, and versatility. Built with innovative Purposely Induced Porosity and cutting-edge 3D-printed Inconel for superior strength and heat resistance, it offers compact dimensions, lightweight design, and a sleek heat-resistant coating. Compatible with a wide range of platforms thanks to its 1/2x28 to 1-3/8X24 (HUB) adapter, it ensures reliable performance even under demanding conditions, supporting limited full-auto firing. With a focus on safety and precision.
Rating
|
VS-5560101
Out of stock
Tuna Cans 5.56 S (6 Baffle), Stainless
|
The Tuna Cans 5.56 (6-Baffle) is built in the same hard-use style, design, and materials as our proven lineup—scaled and tuned specifically for 5.56 performance. Made in-house in our Texas warehouse, this is a no-BS suppressor that delivers strength and performance without the inflated price tag.Machined from heat-treated 17-4 stainless steel, this can is extremely durable and designed to handle aggressive firing schedules. Inside is a 6-baffle stack with ribbed baffles that increase turbulence through the chambers for consistent performance. The threaded baffle system means each baffle screws together, creating a solid, serviceable stack. Up front, the suppressor features a large 3″ blast chamber, allowing it to accept HUB mounts and large mounting systems that use standard TPI threading (we recommend the Tuna Can “1-Piece” Mount for best results). With a .299 bore, this suppressor is optimized for 5.56 platforms and is FULL AUTO rated for .223 / 5.56. It can also shoot 6mm ARC and 6mm PRC on semi-auto firearms. Semi-auto rated: 6mm ARC / 6mm PRC/ ( 6.5 creed but only with a alignment rod test first, since its getting tight with .264 bullet) 1.375×24 standard TPI Hub Threaded ( DOES NOT COME WITH A MOUNT)
|
20212
Out of stock
Griffin Armament Optimus 6 Suppressor, 5.56mm/6mm, Hub
|
The Optimus® 6 is a 6mm bore additive manufactured (3D Printed) suppressor optimized for reducing system backpressure over “traditional” suppressors by way of its high-flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low backpressure baffle stack to kill flash at a level almost unseen in other low backpressure suppressors available on the market.
The Optimus® 6 is made entirely from ultra-strong 17-4 stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 6 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 6 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP6UM-W
Out of stock
Warrior Systems Legionary, BLK - .22 CAL
|
Warrior System is entering the game of suppressors with the same precision building that comes along with their line of rifles. With a standard nise reduction of 27 Decibel noise reduction. Type 3 Hard Coat Anodized Black. 1/2x28.
|
3012105
Out of stock