SUPPRESSORS
Shop by:
 More
|
Your results are being filtered by:
- Category -> NFA
Remove Filters
Products
Griffin Armament AM 5 Suppressor, 5.56mm, Hub
|
The HUB DUAL-LOK® 5 AM Silencer is a managed backpressure 5.56mm suppressor constructed from Griffin’s proprietary Nickel 625X™ powder alloy utilizing state-of-the-art DMLS additive manufacturing technology. This is a major evolution to the DUAL-LOK® family of suppressors which were historically manufactured from traditionally manufactured components. These silencers utilize the industry-standard HUB threaded rear (1.375×24 TPI) allowing the end user to configure their suppressor with any of Griffin’s HUB mount adapters, or other manufacturer’s inserts. The proprietary, patent-pending Nickel 625X™ alloy showed in testing a ~68% increase in yield and tensile strength over additively manufactured INCONEL® 625 at 1200°F. INCONEL® 625 is a commonly used suppressor alloy in current next generation military suppressors. Additively manufactured Nickel 625X™ is stronger at 1472°F than INCONEL® 625 cold formed sheet material at room temperature. INCONEL® 625 cold formed material provided adequate service in the last several decades of military suppressors. The new flash hider end cap reduces system backpressure by peripherally venting gases, resulting in softer recoil impulses, less wear and tear on the host firearm, and reduces operator exposure to toxic gases. This managed backpressure unit takes sound suppression to previously un-obtainable levels of sound performance, offering incredible market leading sound and flash reduction with minimal backpressure. This allows the HUB DUAL-LOK® 5 AM to provide right handed shooters a low backpressure suppressor experience, while left handed shooters should look to our HRT-556 AM ultra LBP suppressors. Note: Griffin’s HUB Mount Silencers do NOT ship with a muzzle device, or HUB Mount Interface. If desired, a HUB Mount can be added to your order using the buttons above. Ratings:
|
GAHUB556AM-W
Out of stock
Griffin Armament AM 7 Suppressor, 7.62mm, Hub
|
The HUB DUAL-LOK® 7 AM Silencer is a managed backpressure 7.62mm suppressor constructed from Griffin’s proprietary Nickel 625X™ powder alloy utilizing state-of-the-art DMLS additive manufacturing technology. This is a major evolution to the DUAL-LOK® family of suppressors which were historically manufactured from traditionally manufactured components. These silencers utilize the industry-standard HUB threaded rear (1.375×24 TPI) allowing the end user to configure their suppressor with any of Griffin’s HUB mount adapters, or other manufacturer’s inserts. The proprietary, patent-pending Nickel 625X™ alloy showed in testing a ~68% increase in yield and tensile strength over additively manufactured INCONEL® 625 at 1200°F. INCONEL® 625 is a commonly used suppressor alloy in current next generation military suppressors. Additively manufactured Nickel 625X™ is stronger at 1472°F than INCONEL® 625 cold formed sheet material at room temperature. INCONEL® 625 cold formed material provided adequate service in the last several decades of military suppressors. The new flash hider end cap reduces system backpressure by peripherally venting gases, resulting in softer recoil impulses, less wear and tear on the host firearm, and reduces operator exposure to toxic gases. This managed backpressure unit takes sound suppression to previously un-obtainable levels of sound performance, offering incredible market leading sound and flash reduction with minimal backpressure. Note: Griffin’s HUB Mount Silencers do NOT ship with a muzzle device, or HUB Mount Interface. If desired, a HUB Mount can be added to your order using the buttons above. Ratings:
|
GAHUB762AM-W
Out of stock
Griffin Armament Bushwacker 46, Modular 46 Cal
|
The Bushwhacker® 46 was designed to exceed end user desires for the best large bore (.46 cal) universal suppressor on the market. The current (gen 2) version further pushes this high bar to even higher heights of performance. Engineered to be more compact, more durable, with higher performance, and more mounting options than any other, make the Bushwhacker® 46 the class leader in the universal suppressor category.
ECO-FLOW™ baffle technology system provides reduced back pressure, greater structural strength, higher heat resistance for enhanced durability, and longer service life, as well as 5-7db sound pressure level drops vs the original version. This high performance baffle technology allowed engineering to reduce the overall length of the product to a compact 7.75" while simultaneously increasing performance. The Bushwhacker® retains the patented Ratchet-LOK™ end cap system, which allows users to fully take apart, clean, and maintain their suppressor. Carbon and copper deposits parasitically reduce volume inside suppressors over time, which reduces their sound performance. The PLAN-A™ taper mount interface, provides an accurate, minimal length and weight solution to configuring the suppressor in a rifle configuration. This configuration supports Griffin's tried and true taper mount devices, which have been proven to provide the least point of impact shift and greatest accuracy to long range shooters in the firearms community. The booster piston system affords the user the ability to convert the suppressor for use on browning style action (tilt barrel) pistols. Rating
|
GABUSH46-W
Out of stock
Griffin Armament Checkmate HD 22 DT, .22 CAL
|
The new CHECKMATE-HD (CAM-LOK) is a 5.8 ounce 5.7x28 pistol rated rimfire suppressor and utilizes ECO-FLOW baffle technology as well as newly developed CARBON-GARD technology- the subject of a pending patent. The 5.8 ounce, 5.04" overall length suppressor features a 17- 4 heat treated ECO-FLOW baffle system, front cap, and integrated EZ-LOK QD mounting system. The tube is 7075-T6 billet machined and hardcoat anodized for maximum strength.Rating
|
GACMHD22CL-W
Out of stock
Griffin Armament Dual-Lok PSR Suppressor, 5.56mm 1/2x28
|
Reflex Suppressors, or Over the Barrel Suppressors have been manufactured for quite some time, but recently haven't been the focus by mainstream manufacturers. Griffin first made over the barrel suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados. Griffin is reintroducing next generation over the barrel suppressors with the DUAL-LOK PSR suppressor series.
|
GADLPSR556-W
Out of stock
Griffin Armament Dual-Lok Suppressor, 5.56mm 1/2x28
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 5 features the DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL556-W
Out of stock
Griffin Armament Dual-Lok Suppressor, 7.62 5/8x24
|
Griffin utilized the new DUAL-LOK locking mount system with this suppressor, an often demanded feature by government customers. The DUAL-LOK 7 features the patent pending DUAL-LOK mounting system, an accurate, robust, reliable, and wear free system with robust muzzle device support. The suppressor was designed to have minimal flash signature, POI shift, and gas blow back, coupled with maximum strength, durability, and high sound signature reduction performance.
|
GADL762-W
Out of stock
Griffin Armament Optimus 7 Suppressor, .30cal, Hub
|
The Optimus® 7 is a .30cal additive manufactured (3D Printed) suppressor optimized for reducing system back pressure over “traditional” suppressors by way of its high gas flow baffle design, while maintaining impressive flash and sound reduction. The quad-tine flash hider endcap was painstakingly tuned in conjunction with the low back pressure baffle stack to kill flash at a level almost unseen in other low back pressure suppressors available on the market. This suppressor was optimized for .30cal projectiles such as .308 WIN and .300WM.
The Optimus® 7 is made entirely from ultra-strong 17-4 H900 heat treated stainless steel. The tube body of the printed core is machined during post-production to create a smooth, beautiful exterior absent of the normal printing layers visible in most other printed cans. The blast shield and mount system is machined in-house from 17-4 SS, then laser-welded to the baffle core allowing for easy warranty of the suppressor in the case of a baffle strike or other catastrophic failure. Optimus® 7 suppressors, like all other Griffin suppressors, are warrantied for life under Griffin’s Perpetual Lifetime Warranty™. Griffin Armament has been designing and prototyping additive-manufactured suppressors for many years, but felt the technology had not become accessible or affordable enough to bring to market a feature-packed sound suppressor at a value-driven price. Recent advancements in 3D metal printing technology has changed this and in response Griffin went full-tilt into designing it’s first line of suppressors manufactured using this technology. NOTE: Utility Mount (HUB) Optimus® 7 Suppressors DO NOT COME WITH A MUZZLE DEVICE OR HUB INSERT. Muzzle Devices and mount interfaces for HUB-mount variants must be purchased separately. Ratings:
|
GAOP7UM-W
Out of stock
Griffin Armament Optimus Micro, .22 CAL
|
The Optimus Micro re-defines the rimfire class of suppressors by offering the most durable and versatile rimfire suppressor ever designed. Utilizing state of the art manufacturing and heat treated 17-4 stainless steel throughout, the Optimus Micro supports 5.56mm cartridges out of the box using the included 1/2×28 direct thread mount. Interlocking HEDP patented baffle technology provides uncompromising sound performance while ensuring durability and proper orientation. Patent pending dual taper locking front caps ensure the suppressor can be used vigorously without fear of unintentional disassembly. Rating
|
GAOPM-W
Out of stock
Griffin Armament Revolution 9, Modular 36 Cal
|
The original Revolution® 9 & 45 suppressors were the first pistol silencers developed and brought to market with a modular length feature set, and that Griffin innovation inspired all the other modular length pistol suppressors in the US marketplace. The (MOD 4) Revolution® 9 suppressor represents a total redesign around of package of end user feature interaction enhancements, making the suppressor more secure and easier to mount, as well as fast and easy to configure in length, and easy to disassemble, at vastly increased maintenance intervals. The forward extension allows tool-less reconfiguration, and the O-ring biased extension and front cap prevent inadvertent loosening of the extension or cap. The booster housing (mount accessory interface socket) is permanently installed so tightening and loosening the suppressor does not result in loosening of the booster housing. The housing accepts pistons, fixed barrel mounts and spacers, our Griffin developed industry first integrated 3 lug mount, as well as Plan A mounts.
Another major improvement introduced in the MOD 4 generation is the incorporation of Griffin’s patented CARBON-GARD™ baffle technology. This concept, originally debuted in the Checkmate HD suppressor, has applications for pistol suppressors to make cleaning and maintenance of the suppressor easier even after very high round counts. High temp silicon o-rings are positioned at each baffle interface as well as the end cap, blast chamber, and extension tubes to fully seal gases and carbon within the baffle stack. This gas seal prevents lead and carbon fouling from building up between the tube body and the baffle stack, eliminating instances of the baffle core being carbon locked inside of the tube body, a condition that is very annoying for the end user. Revolution® MOD 4 Suppressors ship with an included EZ-LOK™ piston providing a more secure, and rapid mounting system than direct thread. EZ-LOK™ barrel end adapters are available for purchase separately. Rating
|
GAREV9M4-W
Out of stock
Huxwrx Flow 22Ti Suppressor FDE
|
The FLOW 22 Ti is the lightest and quietest Flow-Through suppressor to come from HUXWRX Safety Co. Completely 3D-printed in Grade 5 Titanium, the FLOW 22 Ti is lightweight, versatile, and extremely durable. Built with the latest advancements on our patented and proven Flow-Through technology, it effectively delivers toxic fume mitigation, improved sound performance, and increased accuracy with excellent repeatability. This suppressor comes direct thread ready in 1/2x28, offers a cleaner shooting experience, and requires no general modifications to the weapon system. The FLOW 22 Ti is full-auto rated and cross platform compatible for 17 HMR, 22 LR, 22 Magnum, and 5.7 with no barrel length restrictions. This suppressor is ideal for competition shooters, hunting enthusiasts, and individuals seeking a top-tier rimfire build. |
3166
Out of stock
Otter Creek Infinity, 7.62 - BLK
|
Infinity — We decided to call this project Infinity early on because we wanted this to be a suppressor that will last you forever, you can pass down to your grandchildren and it last them forever too. Also because of it’s adjustability and ability to be configured to any host you have. It’s also marks our entry into the low back pressure market. Notice I didn’t say no back pressure, I said lowER back pressure. We wanted this suppressor to straddle the line of suppressors with zero back pressure that sound like a pipe bomb and suppressors with high back pressure that sound great. There’s no free lunch when it comes to sound suppression. You either have a suppressor that’s loud with zero gas to the face or you have a suppressor that’s quiet with some uncomfortable gas to the face, it just is what it is. We wanted a suppressor that could ride the middle ground line and venture to both sides of the line depending on what the user wanted. So let’s cut through the bull shit and get down to the nitty gritty of what this suppressor does and what makes it unique. We knew we wanted it to be 7.62 bore with changeable end caps. We knew we wanted it to have great 7.62 performance but let’s not kid ourselves, 99% of users buying a 7.62 bore suppressor are using it on 5.56 most of the time. So the 5.56 performance also had to be on point. We developed the general sound profile using 7.62 and then further dialed it in and refined it using 5.56 – we made over 100 prototypes in almost 2 years of testing finding just the right combination that does just as good on 5.56 as an actual 5.56 bore suppressor while still offering great 7.62 performance AND works well being vented or unvented. Included:
|
INF762
Out of stock
Otter Creek Titanium 22, .22LR - BLK
|
Titanium 22 is a simple, easy to use, easy to clean, light weight, small, quiet 22 suppressor. The mount threads longer to accommodate some of the longer threaded rifle barrels so you can use it without having to use a spacer or shim. The wrench flats in the front and rear of the suppressor can be used with any adjustable wrench from your local hardware store. Just a straight forward product that you can be happy you bought with your hard earned money.
|
TI22
Out of stock
PTR Vent 2 9mm Luger, 1/2"-28
|
The ultra-high performance patented VENT TM Suppressor utilizes the next generation of suppressor technology. The design features sintered titanium and patented Purposely Induced Porosity (PIP), which enables it to outperform nearly every competitor in the market with its unique combination of lightweight, heat dissipation, sound suppression, and back pressure reduction. These suppressors employ a 3D-printed, monolithic, body-to-core structure, increasing their structural integrity and thermal resilience. This revolutionary design eliminates failure points often associated with traditional suppressors. Through the use of Purposely Induced Porosity (PIP), PTRs engineers are able to finely tune the strength, density, heat capacity, and thermal conductivity of the VENT suppressors in ways that are beyond the capabilities of traditional manufacturing. This industry leading technology creates a way to control the rapid expansion of gas that traditional baffle and flow through suppressors are unable to achieve, making the line of VENTTM Suppressors truly cutting-edge and superior in the marketplace.
Rating
|
V2-0090101
Out of stock
Radical Defense LS3 Rifle Suppressor 30 Cal, 5/8x24
|
3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-3 is one of the most durable suppressors on the market to date. The LS-3 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-3 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.
Rating
|
LS3
Out of stock
Radical Defense LS3 Ti Rifle Suppressor 30 Cal, 5/8x24
|
The RD LS3 Suppressor is engineered for shooters who demand maximum control, minimal signature, and uncompromising reliability. Optimized for .300 Blackout systems and bolt-action precision rifles, the LS3 delivers exceptional sound reduction, recoil management, and long-term durability in a compact, mission-ready package. Designed with RD’s proprietary Breathable Technology®, the LS3 actively reduces blowback and back pressure—ensuring smooth cycling and stable performance, even during rapid fire on semi-auto platforms or repeated shots from suppressed bolt guns. The result: tighter shot groups, reduced shooter fatigue, and enhanced stealth in critical moments. Its monolithic construction is built to endure the harshest field conditions—resistant to heat, corrosion, and salt air—while maintaining consistent point-of-impact shift and structural integrity over long-term use. Finished in RD’s infrared-suppressive, non-reflective coating, the LS3 minimizes visual and near-IR signature, making it ideal for operations under night vision, thermal optics, or in environments where discretion is paramount. From suppressed DMRs and short-barreled .300 Blackout rifles to long-range bolt actions, the RD LS3 Suppressor delivers precision and power—quietly and without compromise. Rating
|
LS3TI
Out of stock
Radical Defense LS5 Rifle Suppressor 5.56, 1/2x28
|
3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-5 is one of the most durable suppressors on the market to date. The LS-5 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-5 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.
Rating
|
LS5
Out of stock
Radical Defense LS5 Ti Rifle Suppressor 5.56, 1/2x28
|
The RD LS5 Suppressor is a precision-engineered solution for 5.56mm weapons, designed to deliver exceptional sound suppression, recoil mitigation, and operational reliability. Built for warfighters, law enforcement, and professional end users who demand superior performance in every shot, the LS5 delivers suppression without compromise. Featuring RD’s proprietary Breathable Technology®, the LS5 actively stabilizes internal pressure while reducing blowback and minimizing back pressure to the weapon system. This translates to smoother cycling, reduced carbon buildup, and enhanced shooter control in both semi-auto and full-auto applications. Its monolithic, corrosion-resistant construction is built to withstand harsh operational environments, including salt air, extreme temperatures, and prolonged high-volume fire. With zero modification required to the host weapon, the LS5 integrates seamlessly across a wide range of 5.56mm rifles and carbines. Coated in RD’s infrared-suppressive, non-reflective finish, the LS5 reduces visual and near-IR signature, supporting stealth operations in both day and night conditions. Rating
|
LS5TI
Out of stock