Heckler and Koch

Products

Heckler and Koch MR556 AR15 Rifle

Heckler and Koch MR556 AR15 Rifle

A direct descendent of the HK416, the MR556A1 is a semi-automatic rifle developed by Heckler & Koch as a premium level commercial/civilian firearm with match rifle capability. Like the HK416, the MR556A1 is a major product improvement over conventional AR-type carbines and rifles. The Heckler & Koch MR556A1 uses the HK proprietary gas piston operating system, employing a piston and a solid operating “pusher” rod in place of the gas tube normally found in AR15/M16/M4-style firearms. This method of operation virtually eliminates malfunctions that are common to direct impingement gas systems since hot carbon fouling and waste gases do not enter the receiver area. This is the same key feature critical to the success of the HK416 rifles used by leading military and law enforcement customers

MR556-A1

Out of stock

$2999.99

Out of stock
Heckler and Koch MR556 Competition AR15 Rifle

Heckler and Koch MR556 Competition AR15 Rifle

A direct descendent of the HK416, the MR556 is a semi-automatic rifle developed by Heckler & Koch as a premium level commercial/civilian firearm with match rifle capability. Like the HK416, the MR556 is a major product improvement over conventional AR-type carbines and rifles. The Heckler & Koch MR556 uses the HK proprietary gas piston operating system, employing a piston and a solid operating pusher rod in place of the gas tube normally found in AR15/M16/M4-style firearms. This method of operation virtually eliminates malfunctions that are common to direct impingement gas systems since hot carbon fouling and waste gases do not enter the receiver area. This is the same key feature critical to the success of the HK416 rifles used by leading military and law enforcement customers. The MR556 Competition model features input from competitive shooters and is designed for enhanced performance in a competitive or duty environment. Features a 14" Modular keymod rail system, lightweight Magpul CTR stock, muzzle brake, oversized, extended magazine release, extended charging handle, two stage trigger, and cold hammer forged 16.5" barrel.

CR556-A1

Out of stock

$2449.95

Out of stock
Heckler and Koch MR762 Rifle 7.62 x 51mm

Heckler and Koch MR762 Rifle 7.62 x 51mm

The HK MR762 has been engineered based on the HK417 design, but in a semi-automatic configuration for civiliam use. The MR762 uses the HK Gas Piston System, consisting of a piston and operating rod which reduces wear and carbon fouling. This increases reliability over gas impingement systems. The MR 762 comes standard with ambidextrous controls, free floating Modular Rail System (MRS), and a two stage trigger.

MR762-A1

Out of stock

$3579.95

Out of stock
Heckler and Koch USC .45ACP Rifle

Heckler and Koch USC .45ACP Rifle

Derived from the HK UMP submachine gun, the USC is a civilian utility carbine that uses the classic hard-hitting .45 ACP cartridge. Matched with a simple and ultra-reliable blowback operating system, the HK USC is a radical departure from traditional firearms designs.
Extensive use of the same durable reinforced polymers found on HK‘s line of military and police arms ensures lightweight and durability. And the highest grade of weapons steel is used where it matters —in the cold hammer forged target barrel and the solidly constructed bolt mechanism.
User ergonomics are not sacrificed. The skeletonized buttstock is capped with a comfortable rubber cheek rest and recoil pad. The web of the pistol grip is open for a comfortable handhold for a wide range of shooting applications. Hard points located on the top and sides of the receiver and handguard make attachment of optional Picatinny rails easy —allowing almost any kind of accessory to be mounted.
HK USC are covered by HK‘s lifetime warranty.


LIMITED PRODUCTION FOR 2018


USC CARBINE FEATURES

• Tough, lightweight, corrosion proof polymer construction
• Molded-in hard points for mounting accessories
• Optional accessory Picatinny rails available for easy mounting of
optical sights, lights, and aiming devices
• Rear sight is adjustable for windage and elevation
• Ambidextrous safety/selector lever
• Oversized trigger guard for easy operation while wearing gloves
• Sixteen inch cold-hammer forged target barrel
• Polymer 10 round magazine
• Lifetime warranty

701445-A5

Out of stock

$1499.95

Out of stock
HK AR15 .223 30RD Magazine - MR556, M4

HK AR15 .223 30RD Magazine - MR556, M4

Heckler & Koch steel high reliability AR15 .223, 5.56x45 30 round magazines. These superior magazines are designed to withstand the most adverse enviroments and extremes and still function. Featuring durable steel contruction of the magazine body and follower, an anti-friction type finish and a advanced high strength spring.

Please check restricted shipping zones before ordering.

251770

Out of stock

$49.99

Out of stock
HK Barrel O-Ring - .45ACP

HK Barrel O-Ring - .45ACP

Heckler & Koch Barrel O-Ring for all H&K .45ACP caliber pistols (HK45, HK45C, MK23, USPT). Factory replacement part manufactured by HK in Germany.

986429

Out of stock

$4.95

Out of stock
HK Catch - USPF/USPC/HK45/HK45C LEM

HK Catch - USPF/USPC/HK45/HK45C LEM

HK factory made catch for USP Compact LEM and HK45 models. New style catch to convert older USP models to the newer style catch as well as to convert to the LEM variant. Fits all LEM models for USP Full Size, Expert, Elite, USPC, HK45, and HK45C.

219442

Out of stock

$9.95

Out of stock
HK Detent Plate USP and USP Compact V3, V4

HK Detent Plate USP and USP Compact V3, V4

Factory Heckler & Koch detent for all USP and USP Compact models with trigger variants 3 and 4.

214254

Out of stock

$9.95

Out of stock
HK Disconnector USP and Compact 9/40/357/45 and HK45

HK Disconnector USP and Compact 9/40/357/45 and HK45

Made in Germany at the HK factory, disconnectors for full size USP 9mm, .40S&W, .45ACP. Also fits USP Compact 9mm, .40S&W, .357SIG, .45ACP, USP Compact LEM and HK45.

214840

Out of stock

$5.99

Out of stock
HK Firing Pin Block All USP, P2000, P2000SK, P30, P30SK HK45 New Style

HK Firing Pin Block All USP, P2000, P2000SK, P30, P30SK HK45 New Style

New style firing pin block for all USP and Compact, all P2000 and P2000SK, all P30, all HK45 and Compact models.

209313

Out of stock

$12.95

Out of stock
HK Hammer full size USP 9/40/45 and USP Compact 9/40/357/45, V1, V2, V3, V4, V9, V10

HK Hammer full size USP 9/40/45 and USP Compact 9/40/357/45, V1, V2, V3, V4, V9, V10

HK Hammer for full size USPs chambered in 9mm and .40S&W, .45ACP and USP Compact 9mm, .40S&W, .357SIG and .45ACP. models with trigger variants V1, V2, V3, V4, V9, V10.

218570

Out of stock

$59.95

Out of stock
HK HK45 Barrel - THREADED

HK HK45 Barrel - THREADED

Heckler & Koch HK45 threaded barrel. Manufactured by the H&K factory in Germany. Designed to fit the full size HK45, not USP models. Threads are 16X1-LH.

233352

Out of stock

$289.95

Out of stock
HK LEM Trigger Conversion Kit - All USP and All HK45

HK LEM Trigger Conversion Kit - All USP and All HK45

HK LEM Trigger Kit for all USP and USP Compact pistols and all HK45 and HK45 Compact pistols. This universal factory Heckler & Koch LEM kit is complete with all of the parts required for the conversion.

Comes with two hammer springs:
  • The longer hammer spring is for all USP, USP Compact and full size HK45.
  • The shorter hammer spring is only for the HK45 Compact.
USP LEM and HK45 trigger pull weights:
  • Use the trigger return spring that is already in your gun for light LEM trigger pull, approximately 4-5 lbs.
  • Use the trigger return spring in the kit for the heavier LEM trigger pull, approximately 7 lbs.

USP models prior to 2005 will also need 209266 Trigger Rebound Spring.

260204

Out of stock

$119.95

Out of stock
HK P2000SK .357SIG Barrel

HK P2000SK .357SIG Barrel

Heckler & Koch P2000SK .357SIG barrel. Manufactured by the H&K factory in Germany. Designed to fit the P2000SK Sub-Compact. Barrel is 3.27" long.

202688

Out of stock

$249.95

Out of stock
HK P30 9mm Tactical Barrel - THREADED

HK P30 9mm Tactical Barrel - THREADED

Heckler & Koch P30 threaded barrel. Manufactured by the H&K factory in Germany. Designed to fit the full size 9mm P30. Threads are M13.5 X 1LH.

234391

Out of stock

$199.95

Out of stock
HK P7 Cylinder Cleaning Brush

HK P7 Cylinder Cleaning Brush

H&K P7 Cyinder Brush for all Heckler & Koch P7 models. Used to clean carbon deposits from the cylinder to keep your gun cycling properly. Manufactured by HK.

222269

Out of stock

$8.95

Out of stock
HK P7 PSP 9mm - USED

HK P7 PSP 9mm - USED

USED HK P7 PSP blue finish with the European magazine release. Expect minor holster wear on sharp edges and slide. Ships with one magazine and case.

P7-PSP-USED

Out of stock

$1199.99

Out of stock
HK P7 Series Gas Cylinder Scraper

HK P7 Series Gas Cylinder Scraper

HK P7 Carbon Scraper for all P7 Series pistols. Authentic H&K factory tool. This tool is necessary to clean the carbon deposits and build up out of the gas cylinder to maintain proper function. Works with the P7 PSP, P7 M8, P7 M10 and P7 M13 models.

228377

Out of stock

$29.95

Out of stock