Sig Sauer P228 Gun Parts

Sig Sauer P228 Gun Parts

Products

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

The P22xCT Classic Standard Trigger adds over-travel adjustability to our original design. Utterly indestructible, the P22xCT Classic Standard is machined from tough steel, carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function.

Our intermediate trigger shape optimizes both SA and DA control for optimal control, and is more comfortable than the factory short trigger it replaces. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Will not fit SIG Pro, X5 Allround, P225 / P6, P239 or most SAO models. Also will not fit older P220 with 8mm wide trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

This product was previously referred to as the P-Series Precision Adjustable Intermediate Trigger (P-SAIT).

TRG-SIG-22X-AIC

In stock

$39.00

Grayguns P320 Adjustable Hybrid Trigger

Grayguns P320 Adjustable Hybrid Trigger

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program.

Specifications and Features

  • Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program
  • Adjustable over-travel to help reduce reset and take out wasted motion
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-SIG-320-AHT

In stock

$89.00

Wolff Recoil Spring - SIG P225/228/229

Wolff Recoil Spring - SIG P225/228/229

SIG P225/228/229 RECOIL SPRINGS

  • Factory Standard 9mm, .40 S&W: 16LB
  • Factory Standard 357 Sig : 17LB

*Firing Pin Spring Included

461-14lbs

In stock

$7.79

Wolff Hammer Spring - SIG P220/225/226/228/229

Wolff Hammer Spring - SIG P220/225/226/228/229

P220 above Serial # 219166

  • Models without plastic retainer/base
  • Factory Standard 24 LB

Sig P225, P226, P228 and P229

  • Factory Standard 24 LB

285 - 16lbs

In stock

$3.99

Sig Sauer Safety Lever - P225/226/228/229/239

Sig Sauer Safety Lever - P225/226/228/229/239

Sig Sauer factory Safety Lever for P225, P226, P228, P229 and P239 models.

LEVER-15

In stock

$9.95

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-ELS-STA-DAK

In stock

$179.00

SIG Firing Pin Spring - All P Series

SIG Firing Pin Spring - All P Series

SIG factory Firing Pin Spring for all P Series models.

SPRING-1

In stock

$7.95

SIG Standard Trigger - P226, P228, P229 Black

SIG Standard Trigger - P226, P228, P229 Black

SIG factory Standard Trigger for P226, P228, P229, 227 and recent production P220 with wide (10mm) trigger. A Short Trigger for the P220 SAO is not available.

TRIGGER-6

In stock

$39.95

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer factory Sear for P227, P225, P226, P228, P229 and P239 DA/SA and DAK models.

1200352-R

In stock

$59.95

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

SYS-SIG-22X-MSS

In stock

$19.00

Crimson Trace Laser Grips - Sig Sauer P228 / P229

Crimson Trace Laser Grips - Sig Sauer P228 / P229

Crimson Trace Laser Grips for the Sig Sauer P228 and P229 feature a comfortable and secure rubber texture with a sturdy polymer frame. The easily activated red laser puts you on target fast.

LG-329

Out of stock

$299.00

Out of stock
Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Super Black Finish

GRD-SIG-22C-SB

Out of stock

$25.00

Out of stock
Hogue Extreme Aluminum Grips P228, P229 - CHECKERED MATTE BLACK

Hogue Extreme Aluminum Grips P228, P229 - CHECKERED MATTE BLACK

Hogue Extreme Aluminum grips are machined for a perfect fit from solid aluminum. They are then checkered for a positive, slip free grip surface and hard anodized for added durability. A P229 is pictured. These will fit all P228's and P229's with either style mainspring assembly and trigger bar spring.

28170

Out of stock

$101.96

Out of stock
Hogue Extreme G10 Grips P228, P229 - CHECKERED BLACK

Hogue Extreme G10 Grips P228, P229 - CHECKERED BLACK

The G10 grips are another product in the Extreme Series line from Hogue. Manufactured from the high strength G10 composite and checkered for a positive grip. These will fit all P228's and P229's with either style mainspring assembly and trigger bar spring.

28179

Out of stock

$101.96

Out of stock
Hogue Grip Screw - P226/P228/P229- BLUE

Hogue Grip Screw - P226/P228/P229- BLUE

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26009

Out of stock

$8.95

Out of stock
Hogue Grip Screw - P226/P228/P229- STAINLESS

Hogue Grip Screw - P226/P228/P229- STAINLESS

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26019

Out of stock

$8.49

Out of stock
Hogue Rubber Finger Groove Grips P228/229

Hogue Rubber Finger Groove Grips P228/229

Rubber Hogue grips with finger grooves for the Sig P228 and P229 pistol.

28000

Out of stock

$23.95

Out of stock