Sig Sauer P228 Gun Parts

Sig Sauer P228 Gun Parts

Products

Wolff Hammer Spring - SIG P220/225/226/228/229

Wolff Hammer Spring - SIG P220/225/226/228/229

P220 above Serial # 219166

  • Models without plastic retainer/base
  • Factory Standard 24 LB

Sig P225, P226, P228 and P229

  • Factory Standard 24 LB

285 - 16lbs

In stock

$3.99

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

In stock

$69.00

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

The P22xCT Classic Standard Trigger adds over-travel adjustability to our original design. Utterly indestructible, the P22xCT Classic Standard is machined from tough steel, carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function.

Our intermediate trigger shape optimizes both SA and DA control for optimal control, and is more comfortable than the factory short trigger it replaces. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Will not fit SIG Pro, X5 Allround, P225 / P6, P239 or most SAO models. Also will not fit older P220 with 8mm wide trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

This product was previously referred to as the P-Series Precision Adjustable Intermediate Trigger (P-SAIT).

TRG-SIG-22X-AIC

In stock

$39.00

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Sig Sauer Hammer Pivot Pin

Sig Sauer Hammer Pivot Pin

Sig Sauer factory Hammer Pivot Pin, all P series models. Genuine OEM gun parts ensure proper fit and finish as well as keeping your Sig Sauer pistol reliable.

PIN-21

In stock

$9.95

Sig Sauer Mainspring - P227/P220/226/228/229/245 DA/SA New Style

Sig Sauer Mainspring - P227/P220/226/228/229/245 DA/SA New Style

Sig Sauer factory Mainspring (Hammer Spring) for all caliber P227, P220, P226, P228, P229 (new style) and P245 DA/SA models.

MAINSPRING-1

In stock

$9.95

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

Grayguns Master Spring Set - Sig Sauer P-Series - NOT P225/P6

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

SYS-SIG-22X-MSS

Out of stock

$19.00

Out of stock
Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

TRIGGER-7

Out of stock

$39.95

Out of stock
Sig Sauer Hammer - P220/225/226/228/229/245 Black Super Finish

Sig Sauer Hammer - P220/225/226/228/229/245 Black Super Finish

Sig Sauer factory Hammer for P220, P225, P226, P228, P229 and P245 models, black super finish.

1200454

Out of stock

$59.95

Out of stock
Sig Sauer Mainspring Seat - OLD STYLE - P220, P225, P226, P228, P229

Sig Sauer Mainspring Seat - OLD STYLE - P220, P225, P226, P228, P229

Sig Sauer factory old style metal mainspring seat for the P220, P225, P226, P228, and P229.

MAINSPRING-SEAT-3

Out of stock

$7.95

Out of stock
Sig Sauer Safety Lock - P225/226/228

Sig Sauer Safety Lock - P225/226/228

Sig Sauer factory Safety Lock for P225, P226 and P228 models with carbon steel slides.

34225580

Out of stock

$29.95

Out of stock
Sig Sauer Sear Spring Seat Pin - P Series

Sig Sauer Sear Spring Seat Pin - P Series

Sig Sauer factory Sear Spring Seat Pin for P Series pistols.

1201708

Out of stock

$5.95

Out of stock
Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue

Sig Sauer Take Down Lever - P227/P220/225/226/228/229/245 Blue

Sig Sauer factory Take Down Lever for P227, P220, P225, P226, P228, P229, P239 and P245 models. Part number changed from 34229065.

LEVER-6

Out of stock

$29.95

Out of stock