GRAYGUNS PARTS

GRAYGUNS PARTS

Products

Grayguns HK P30, P2000 Short Reset System

Grayguns HK P30, P2000 Short Reset System

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA and LEM variations.

*Does not work with the CDA LEM 4.1 Triggers*

The kit works with all variants of the HK P2000 and P30 models without a thumb safety including:

  • P30
  • P30L
  • P30SK
  • P2000
  • P2000SK

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

SYS-HK-P30-STD

In stock

$90.00

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.

  • Hybrid face design
  • Preserves factory sear engagement and all mechanical safety values
  • Adjustable over-travel eliminates gross movement after the sear is released and reduces trigger travel to reset
  • Enhanced Leverage geometry reduces pull weight by 30% with stock springs
  • Smoother takeup, sear release and reset sensation
  • Optimal 90⁰ sear release
  • Supports Voluntary Upgrade rough handling characteristics for assurance and reliability
  • Designed for use with the SIG factory trigger bar spring
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

  • High hardness and adhesion
  • Good chemical resistance
  • Good temperature resistance in air
  • Relatively low thermal conductivity
  • Attractive, golden color

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-SIG-320-AHT-TIN

In stock

$99.00

Grayguns P365XL Compensator w/ Barrel

Grayguns P365XL Compensator w/ Barrel

Grayguns P365 Compensator softens recoil and flattens muzzle flip yet only adds 1 inch (1.023″) to the overall length. We’ve designed the comp to ensure it will run reliably with your factory recoil spring. Our clever CompLock index and locking system ensure your SIG Sauer P365 compensator aligns perfectly and stays put.

P365 Compensator Specifications

  • Custom, Grayguns True Precision barrel, Diamond-Like Carbon (DLC) finished for maximum service life
  • Machined from the 7075-T6 aluminum alloy and finished in DLC to complement your factory slide
  • The innovative CompLock index system assures perfect alignment and durability
  • Adds only 1.023 inches to length; passing the reality check
  • DutyComp is optimized for reliable function with defensive ammo using the factory recoil spring assembly; no iffy replacements are required

SYS-SIG-P365XL-BCOMP-V1

In stock

$330.00

Grayguns Sig Sauer P320 Hard Duty Use Trigger -  Adjustable Straight

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Adjustable Straight

The Grayguns P320 Adjustable Straight Trigger is the ultimate fire control refinement for this amazingly versatile platform, embodying the best innovations from Bruce Gray’s continuing R&D program with SIG Sauer®. Like all Grayguns Inc. products, proudly American made from precision machined tool steel, heat treated, hand finished and gauged for perfect appearance, fit and function.

Designed for hard duty use, with the toughness to outlast your pistol, our P320 triggers are Grayguns Grade and guaranteed for life.

P320 Trigger – Straight or Curved – Specifications and Features

  • Adjustable over-travel eliminates gross movement after the sear is released, and reduces trigger travel to reset
  • Enhanced Leverage geometry reduces pull weight by 30% with stock springs
  • Smoother takeup, sear release and reset sensation
  • Optimal 90⁰ sear release
  • Supports Voluntary Upgrade rough handling characteristics for assurance and reliability

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-AST

In stock

$94.00

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

Out of stock

Out of stock
Grayguns Fat Custom Strut System - Sig Sauer P Series

Grayguns Fat Custom Strut System - Sig Sauer P Series

The Grayguns custom-designed Strut System fully supports the main spring, reducing friction, spring bowing and fatigue. The design eliminates the typical double action “crunch” felt in OEM pistols. This full system also includes our custom P-Series Master Spring Set, to help reduce your pull weight for full tuning options.

The SIG P-Series Fat Custom Strut System was designed by Bruce Gray to help bring another Grayguns custom gunsmithing service to the drop in parts market.

For more than 40 years Bruce has been modifying factory struts to eliminate the typical double action crunch caused by the sharp edges and tip of the strut.

In his new design, the fat strut fully supports the main spring which reduces friction, spring bowing, and fatigue. The struts are cut using a precision EDM process, hand finished, and heat treated to the proper hardness. Paired with the upgraded strut, is a durable seat machined in-house out of aircraft grade aluminum and anodized. These struts are indestructible and guaranteed for life.

This full system also includes our custom P-Series Master Spring Set, to help reduce your pull weight for full tuning options. Includes 17 pound spring (red) and 19 pound spring (blue).

Fit Guide

The system is compatible with the E2 style grips, as well as most older style grips. The system fits most of the following SIG DA/SA pistol variants:

  • P226
  • P228
  • P229
  • P225-A
  • P227

Disclaimer

These parts are intended for installation by a qualified armorer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action.

SYS-SIG-226-STRUT

Out of stock

Out of stock
Grayguns Fat Guide Rod - Sig P220/P226 - Stainless

Grayguns Fat Guide Rod - Sig P220/P226 - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Stainless

GRD-SIG-22F-SS

Out of stock

Out of stock
Grayguns Fat Guide Rod - Sig P220/P226 - Super Black

Grayguns Fat Guide Rod - Sig P220/P226 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P220 and P226 - Super Black Finish

GRD-SIG-22F-SB

Out of stock

Out of stock
Grayguns HK P30 w/Safety Short Reset System

Grayguns HK P30 w/Safety Short Reset System

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P30 with thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P30 model with a thumb safety, including DA/SA and LEM variations.

The kit works with all variants of the HK P30 with a thumb safety including:

  • P30
  • P30L
  • P30SK

Will not work with CDA LEM 4.1 trigger.

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

SYS-HK-P30-MS

Out of stock

Out of stock
Grayguns Hogue G10 Grips - P226 DA/SA

Grayguns Hogue G10 Grips - P226 DA/SA

Designed with the masters at Hogue, our grips use a miniature version of the highly popular “Piranha” texture. This custom texture is 40 percent more aggressive than standard grips while being smooth enough to carry. These grips provide the form and function you’ve come to expect from Grayguns.

The Grayguns iconic logo – in pewter – is affixed in the grip’s center. The P226 TDA version is designed with an exclusive shape to accommodate both the standard and SIG Legion controls.

GRP-HOG-226-TDA

Out of stock

Out of stock
Grayguns P30 Straight Trigger - Heckler & Koch P30

Grayguns P30 Straight Trigger - Heckler & Koch P30

Designed by Keith Hosey, Grayguns’ director of gunsmithing, the HK P30 Straight Trigger is a first-of-its-kind in the market. Fits all P30 variants. Reduces over-travel while featuring a 90-degree optimal trigger break.

The straight trigger design does allow for a lower finger placement and may provide the feel of reduced pull weight. The trigger design does not reduce pull weight.

Made in the United States to high-quality standards, guaranteeing the fit and finish Grayguns is known for. Precision machined from tool steel and properly heat treated for optimal wear resistance. Hand inspected and finished to assure a quality trigger we can stand behind for life.

Fit Guide

This trigger will fit all variations (LEM, DA/SA and SAO) of the HK P30 line of pistols. Including:

  • P30
  • P30L
  • P30SK

Fully compatible with the Grayguns HK P30 Short Reset System and HK P30 (with Safety) Short Reset System.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-HK-P30-ST

Out of stock

Out of stock
Grayguns Short Reset Trigger (SRT) Kit - Sig Sauer P-Series

Grayguns Short Reset Trigger (SRT) Kit - Sig Sauer P-Series

The custom-designed Grayguns Short Reset Trigger (SRT) Kit incorporates SIG Sauer’s Safety Lever – with permission – and is designed to provide a smooth, short action reset in a drop in kit. The kit reduces the trigger reset travel by about 70 percent*, when using one of our dual adjustable triggers.

The really special part of this kit is the Bruce Gray designed custom sear. It is a bar-stock steel component, classically machined, painstakingly cut and inspected. The sear is hand-finished for the best angle of engagement and release with the factory hammer. The part is heat treated and stoned to provide a very smooth surface. We follow up with a baked-in nickel PTFE coating for a smooth release and outstanding durability.

User feedback indicates many shooters find their follow-up shots are quicker and more accurate with the Grayguns SRT Kit installed in their SIG DA/SA pistols. (See our Fit Guide below.)

Our Grayguns SRT Kit includes:

  • Bruce Gray designed bar-stock custom sear
  • SIG Sauer safety lever
  • Two, 19 pound mainsprings*

Grayguns Short Reset Trigger Trigger Fit Guide

The Grayguns SRT Kit fits modern, SIG Sauer P-Series DA/SA pistols including: P220, P228, P229, P226, P226 X-Five Allround, P227 and most obsolete versions.

SYS-SIG-22X-SRS

Out of stock

Out of stock
Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Backwards compatible with all versions of P320 modules, including the standard and X-Series with or without the extended magwell installed.

  • This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDE

Out of stock

Out of stock

Grayguns Gun Parts

Grayguns gun parts by renown pistolsmith and Grand Master competition shooter, Bruce Gray. Bruce and his team of highly skilled craftsmen have developed high quality upgrades for Sig Sauer pistols from solid guide rods, sights, recoil springs, extractors, triggers to drop in action enhancement kits. Grayguns offers leading edge design and engineering for the shooter that needs the highest performance out of their pistols. Take your Sig Sauer to the next level with superior products from Grayguns, Inc. On top of creating an end user parts supply, Grayguns is a full service gunsmithing custom shop providing modifications that are well beyond the scope of dropping in parts. OpSpec Training is another branch of the business that provides serious training to new shooters as well as advanced classes for law enforcement, competition shooters and those who want "up their game" for self defense purposes. Top Gun Supply is not only a vendor of Grayguns. We are also a customer and have used most of Bruce's services. But, don't take our word. Ask any one of the many, many satisfied customers.