Daniel Defense

Daniel Defense

more...
Daniel Defense

Products

Daniel Defense 32RD 5.56mm DD Magazine

Daniel Defense 32RD 5.56mm DD Magazine

Built with the same high quality as their precision-made rifles, the Daniel Defense magazine features a 32RD capacity in the same overall size as a comparable 30RD magazine. Lightweight carbon-fiber-reinforced polymer construction, improved feed lip design, anti-tilt follower, impact absorbing baseplate, and a textured body for easy grip in all weather conditions. Made in the USA!

13-072-16539-006

Out of stock

Out of stock
Daniel Defense AR-15 Lower Receiver Parts Kit

Daniel Defense AR-15 Lower Receiver Parts Kit

Daniel Defense AR-15 Lower Receiver Parts Kit includes: A2 Pistol Grip, Magpul Enhanced Polymer Trigger Guard, Pistol Grip Screw, Pistol Grip Lock Washer, AR-15 Pivot Pin, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch Spring, Buffer Retainer Pin, Buffer Retainer Spring, Disconnector Spring, Magazine Catch Spring, Magazine Release Button, Two Pivot/Takedown Detent Pins, Two Pivot/Takedown Detent Springs, Rear Takedown Pin, Safety Detent Selector, Selector Detent Spring, Trigger Guard Roll Pin, Trigger Guard Set Screw, Two Trigger/Hammer Pins, Bolt Catch, Hammer Spring, Magazine Catch Assembly, Safety Semi-Auto Selector, Semi-Auto Disconnector, Semi-Auto Hammer w/ J-Pin Assembly, Semi-Auto Trigger, and Trigger Spring. High quality parts made in the USA!

05-013-21007

Out of stock

Out of stock
Daniel Defense AR15 Bolt Assembly - 5.56mm/300 Blackout

Daniel Defense AR15 Bolt Assembly - 5.56mm/300 Blackout

The Daniel Defense 5.56mm/300 Blackout Bolt Assembly features a shot peened bolt with extractor booster. Made in the U.S.A.

04-013-22183

Out of stock

Out of stock
Daniel Defense Bolt-Up System Barrel Nut Wrench

Daniel Defense Bolt-Up System Barrel Nut Wrench

The Daniel Defense Bolt-Up Barrel Nut Wrench is a proprietary spanner wrench used to install Daniel Defense AR15 Lite Rail, Omega X, and RIS II Rail System. This wrench is designed to be used with a 1/2 drive torque wrench.

16-002-08234

Out of stock

Out of stock
Daniel Defense Carbine H-Buffer

Daniel Defense Carbine H-Buffer

Daniel Defense Carbine H-Buffer Assembly for use in M4-type receiver extension tubes.

05-013-17032

Out of stock

Out of stock
Daniel Defense Castle Nut

Daniel Defense Castle Nut

The Daniel Defense Castle Nut will secure your mil spec or commercial spec carbine receiver extension and rear receiver end plate to the lower receiver. Made with recesses for staking your rear receiver end plate to prevent the castle nut from coming loose. It is finished with a heavy magnesium phosphate coating and is compatible with common armorers/castle nut wrenches (not included).

15-057-20039

Out of stock

Out of stock
Daniel Defense Complete Bolt Carrier Group - 5.56mm

Daniel Defense Complete Bolt Carrier Group - 5.56mm

The Daniel Defense Bolt Carrier Group features a shot peened bolt with extractor booster. The Bolt Carriers are chrome lined, and have properly staked gas keys. Made in the U.S.A.

04-013-19032

Out of stock

Out of stock
Daniel Defense Enhanced Furniture Set

Daniel Defense Enhanced Furniture Set

The Daniel Defense Furniture Set includes an ergonomically enhanced pistol grip, vertical grip, and buttstock. The precision molded buttstock features a comfortable rubber molded cheek-piece, ergonomic latch, interchangeable butt pads and an integrated ambidextrous QD attachment point. Fits Mil-Spec receiver extension tubes. The ergonomic pistol grip shares the same grip angle as the venerable 1911 and incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. The improved vertical grip features comfortable rubber overmolding for a solid grip wet or dry as well as a dual O-ring watertight storage compartment at the base of the grip.

28-102-06145-006

Out of stock

Out of stock
Daniel Defense EZ Carbine QD Swivel Attachment Point (w/swivel)

Daniel Defense EZ Carbine QD Swivel Attachment Point (w/swivel)

The Daniel Defense EZ Carbine QD Swivel Attachment Point attaches easily and securely to any AR15 with a collapsible buttstock and Mil-Spec buffer tube. Heavy duty quick-detach push button sling swivel can be attached to the left or right side for ambidextrous use. CNC machined aluminum and hard anodized finish provides for extended durability. A simple and ingenious way to add a QD attachment point to your rifle! New updated one piece design allows for quick and easy installation. The user simply slides off the buttstock, slides on the EZ Carbine Sling mount and tightens it securely with a common allen wrench. Made in the U.S.A.

03-019-05026

Out of stock

Out of stock
Daniel Defense Mil-Spec Buffer Tube - 6 Position

Daniel Defense Mil-Spec Buffer Tube - 6 Position

Daniel Defense Mil-Spec Buffer tube with 6 position capability with a Mil-Spec retractable stock. 7075-T6 Aluminum. Type-3 Hard Coat Anodized.

*Outside Diameter = 1.15"

05-013-16186

Out of stock

Out of stock
Daniel Defense MK18, 10.3" SBR - Black - 5.56mm

Daniel Defense MK18, 10.3" SBR - Black - 5.56mm

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized

02-088-07327

Out of stock

Out of stock
Daniel Defense MK18, 10.3" SBR - FDE - 5.56mm

Daniel Defense MK18, 10.3" SBR - FDE - 5.56mm

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the Flat Dark Earth MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized (FDE or Black)

DDM4-MK18

Out of stock

Out of stock
Daniel Defense MK18, 10.3" SBR - Tornado Grey - 5.56mm

Daniel Defense MK18, 10.3" SBR - Tornado Grey - 5.56mm

Currently in use with USSOCOM, the Daniel Defense MK18 is a lightweight, compact, short barreled rifle equipped with the MK18 rail system featuring the Bolt-Up System which has been rigorously tested prior to fielding by USSOCOM. The 10.3” barrel is the same length in use for the MK18 upper most commonly used for close quarter operations. The MK18 Factory SBR is unmatched in size, weight, and performance. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum
  • FINISH: Daniel Defense Tornado Cerakote

02-088-05192

Out of stock

Out of stock
Daniel Defense Rail Mount QD Swivel Attachment Point with Swivel

Daniel Defense Rail Mount QD Swivel Attachment Point with Swivel

The Daniel Defense Quick Disconnect rail mounted sling swivel provides versatility by allowing the user to easily choose the optimum mounting position along the rail system. The push button QD provides fast detach of the sling and the rotation limiter prevents the sling from becoming tangled.

03-021-30029

Out of stock

Out of stock
Daniel Defense .750 Clamp Low Profile Gas Block

Daniel Defense .750 Clamp Low Profile Gas Block

The Daniel Defense low profile gas block mounts directly to .750 diameter barrels and is made of 4150 hardened steel with a Mil-Spec phosphate coating for enhanced durability. Made in the U.S.A.

25-079-05006

In stock

$60.00

Daniel Defense Rear Receiver QD Attachment Point End Plate

Daniel Defense Rear Receiver QD Attachment Point End Plate

The Daniel Defense ambidextrous swivel attachment point provides a secure fixture for your push button swivel loop to attach to. Easily installed using only a spanner wrench to remove your collapsible stock and buffer tube. Hard Coat Type 3 anodized and proudly made in the USA.

03-018-04062

In stock

$40.00

Daniel Defense Offset Flashlight Mount PAK

Daniel Defense Offset Flashlight Mount PAK

This Daniel Defense ambidextrous Offset Flashlight Mount incorporates a Positive Action Knob (PAK) for quick detach. The offset design allows the user to mount a flashlight when a vertical foregrip is mounted on the bottom rail allowing for natural positioning of the rear flashlight button. This configuration helps to eliminate unintended light discharge due to the deliberate action required to activate the light. Made in the USA.

DD-6000

In stock

$69.95

Daniel Defense Picatinny Bipod Mount Adapter

Daniel Defense Picatinny Bipod Mount Adapter

The Daniel Defense Picatinny Bipod Mount Adapter allows users with picatinny rail systems to mount bipods that usually attach to swivel studs. Constructed from 6061-T6 aluminum, Type III hard coat black anodized. Made in the U.S.A.

03-141-10324

In stock

$54.00