Daniel Defense

Products

Daniel Defense DDM4 V11 SLW .223/5.56NATO

Daniel Defense DDM4 V11 SLW .223/5.56NATO

Precision built in the USA, Daniel Defense Rifles are engineered with the tactical professional and shooting enthusiast in mind. The DDM4 V11 SLW is a quick handling, lightweight carbine with a Mil-Spec upper and lower receiver, hammer forged, 14.5" lightweight chrome lined 1:7 barrel with a pinned and welded Daniel Defense flash suppressor, H-Buffer, and mid-length gas system. A free-floating Keymod SLiM Rail 12.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. Finished with a Daniel Defense stock and pistol grip, the DDM4 V11 Stretch Light Weight comes with one 32RD Daniel Defense Polymer Magazine, vertical foregrip, manual, and hard case.

DDM4-V11-SLW

In stock

$1665.00

Daniel Defense Custom Rifle .223/5.56NATO

Daniel Defense Custom Rifle .223/5.56NATO

Precision built in the USA, Daniel Defense Rifles are engineered with the tactical professional and shooting enthusiast in mind. This Daniel Defense rifle is custom spec'd and features a carbine length gas system, Daniel Defense LITE RAIL III 7.0", A2 Flash Hider, 16" cold hammer forged 1:7 twist barrel, Magpul MOE buttstock, A2 pistol grip, Vertical grip and fixed front post sight. Comes with one 30RD PMAG, manual, and hard case.

Must ship to a U.S. FFL dealer

DD-CUSTOM

In stock

$1099.99

Daniel Defense AR-15 Lower Receiver Parts Kit

Daniel Defense AR-15 Lower Receiver Parts Kit

Daniel Defense AR-15 Lower Receiver Parts Kit includes: A2 Pistol Grip, Magpul Enhanced Polymer Trigger Guard, Pistol Grip Screw, Pistol Grip Lock Washer, AR-15 Pivot Pin, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch Spring, Buffer Retainer Pin, Buffer Retainer Spring, Disconnector Spring, Magazine Catch Spring, Magazine Release Button, Two Pivot/Takedown Detent Pins, Two Pivot/Takedown Detent Springs, Rear Takedown Pin, Safety Detent Selector, Selector Detent Spring, Trigger Guard Roll Pin, Trigger Guard Set Screw, Two Trigger/Hammer Pins, Bolt Catch, Hammer Spring, Magazine Catch Assembly, Safety Semi-Auto Selector, Semi-Auto Disconnector, Semi-Auto Hammer w/ J-Pin Assembly, Semi-Auto Trigger, and Trigger Spring. High quality parts made in the USA!

05-013-21007

In stock

$94.00

Daniel Defense Rail Mount QD Swivel Attachment Point with Swivel

Daniel Defense Rail Mount QD Swivel Attachment Point with Swivel

The Daniel Defense Quick Disconnect rail mounted sling swivel provides versatility by allowing the user to easily choose the optimum mounting position along the rail system. The push button QD provides fast detach of the sling and the rotation limiter prevents the sling from becoming tangled.

03-021-30029

In stock

$39.00

Daniel Defense Mil-Spec Buffer Tube - 6 Position

Daniel Defense Mil-Spec Buffer Tube - 6 Position

Daniel Defense Mil-Spec Buffer tube with 6 position capability with a Mil-Spec retractable stock. 7075-T6 Aluminum. Type-3 Hard Coat Anodized.

*Outside Diameter = 1.15"

05-013-16186

In stock

$34.00

Daniel Defense Offset Flashlight Mount PAK

Daniel Defense Offset Flashlight Mount PAK

This Daniel Defense ambidextrous Offset Flashlight Mount incorporates a Positive Action Knob (PAK) for quick detach. The offset design allows the user to mount a flashlight when a vertical foregrip is mounted on the bottom rail allowing for natural positioning of the rear flashlight button. This configuration helps to eliminate unintended light discharge due to the deliberate action required to activate the light. Made in the USA.

DD-6000

In stock

$69.95

Daniel Defense Fixed Front/Rear AR-15 Sight Combo

Daniel Defense Fixed Front/Rear AR-15 Sight Combo

The Daniel Defense Fixed Front/Rear Sight Combo is a lightweight, streamlined design that attaches securely to any M1913 picatinny style rail. Easy to use in conjunction with compact pistol lights such as the Surefire X300, TLR-1, etc, the concave radius on either side of the sight is a great place to rest your thumb for easy, ambidextrous activation of the light.

19-088-09116

In stock

$119.00

Daniel Defense Offset Flashlight Mount

Daniel Defense Offset Flashlight Mount

The Daniel Defense ambidextrous Offset Flashlight Mount is designed to allow the user to mount a flashlight when a vertical foregrip is mounted on the bottom rail allowing for natural positioning of the rear flashlight button. This configuration helps to eliminate unintended light discharge due to the deliberate action required to activate the light.

DD-6001

In stock

$43.95

Daniel Defense .750 Clamp Low Profile Gas Block

Daniel Defense .750 Clamp Low Profile Gas Block

The Daniel Defense low profile gas block mounts directly to .750 diameter barrels and is made of 4150 hardened steel with a Mil-Spec phosphate coating for enhanced durability. Made in the U.S.A.

25-079-05006

In stock

$58.00

Daniel Defense Carbine Buffer Spring

Daniel Defense Carbine Buffer Spring

Daniel Defense Carbine Buffer Spring for use in M4-type receiver extension tubes.

  • Outside Diameter: 0.93"

15-024-16146

In stock

$14.00

Daniel Defense Bolt-Up System Barrel Nut Wrench

Daniel Defense Bolt-Up System Barrel Nut Wrench

The Daniel Defense Bolt-Up Barrel Nut Wrench is a proprietary spanner wrench used to install Daniel Defense AR15 Lite Rail, Omega X, and RIS II Rail System. This wrench is designed to be used with a 1/2 drive torque wrench.

16-002-08234

In stock

$10.95

Daniel Defense Offset Flashlight Mount Assembly

Daniel Defense Offset Flashlight Mount Assembly

The Daniel Defense ambidextrous Offset Flashlight Mount is designed to allow the user to mount a flashlight when a vertical foregrip is mounted on the bottom rail allowing for natural positioning of the rear flashlight button. This configuration helps to eliminate unintended light discharge due to the deliberate action required to activate the light. Accommodates a 1" Diameter Flashlight Body. Made in the U.S.A. Updated for 2014, the Offset Flashlight Mount now utilizes a patented “Rock and Lock” one piece mounting system creating an even more robust and streamlined mount as well as simplified installation on any MIL-STD-1913 picatinny rail.

03-020-16514

In stock

$47.00

Daniel Defense Picatinny Bipod Mount Adapter

Daniel Defense Picatinny Bipod Mount Adapter

The Daniel Defense Picatinny Bipod Mount Adapter allows users with picatinny rail systems to mount bipods that usually attach to swivel studs. Constructed from 6061-T6 aluminum, Type III hard coat black anodized. Made in the U.S.A.

03-141-10324

In stock

$52.00

Daniel Defense Rear Receiver QD Attachment Point End Plate

Daniel Defense Rear Receiver QD Attachment Point End Plate

The Daniel Defense ambidextrous swivel attachment point provides a secure fixture for your push button swivel loop to attach to. Easily installed using only a spanner wrench to remove your collapsible stock and buffer tube. Hard Coat Type 3 anodized and proudly made in the USA.

03-018-04062

In stock

$39.00

Daniel Defense 32RD 5.56mm DD Magazine

Daniel Defense 32RD 5.56mm DD Magazine

Built with the same high quality as their precision-made rifles, the Daniel Defense magazine features a 32RD capacity in the same overall size as a comparable 30RD magazine. Lightweight carbon-fiber-reinforced polymer construction, improved feed lip design, anti-tilt follower, impact absorbing baseplate, and a textured body for easy grip in all weather conditions. Made in the USA!

13-072-16539-006

In stock

$19.00

Daniel Defense EZ Carbine QD Swivel Attachment Point (w/swivel)

Daniel Defense EZ Carbine QD Swivel Attachment Point (w/swivel)

The Daniel Defense EZ Carbine QD Swivel Attachment Point attaches easily and securely to any AR15 with a collapsible buttstock and Mil-Spec buffer tube. Heavy duty quick-detach push button sling swivel can be attached to the left or right side for ambidextrous use. CNC machined aluminum and hard anodized finish provides for extended durability. A simple and ingenious way to add a QD attachment point to your rifle! New updated one piece design allows for quick and easy installation. The user simply slides off the buttstock, slides on the EZ Carbine Sling mount and tightens it securely with a common allen wrench. Made in the U.S.A.

03-019-05026

In stock

$71.00

Daniel Defense Rear Receiver QD Swivel Attachment Point (w/QD swivel)

Daniel Defense Rear Receiver QD Swivel Attachment Point (w/QD swivel)

The Daniel Defense™ ambidextrous swivel attachment point provides a secure fixture for your swivel loop to attach to. Easily installed using only a spanner wrench to remove your collapsible stock and buffer tube. Hard Coat Type 3 anodized and proudly made in the USA. Includes QD Sling Swivel.

03-018-30026

In stock

$48.00