ARMORER HAND TOOLS

ARMORER HAND TOOLS

Products

Grease Application Brush

Grease Application Brush

This 1/4" Tin Handle Acid Brush is great for applying Brian Enos's Slide-Glide, TW25B or any of your other favorite weapons lubricants.

SHP13

In stock

$0.99

Hex Head Bit - 1/8"

Hex Head Bit - 1/8"

1/8" Hex Head Bit for installing and removing grip screws. Fits SIG P220, P230, P245 and P225 Hogue grip screws along with various other grip screws. Standard 1/4" drive. Made in Germany.

WT71336

In stock

$1.99

Torx Plus Bit - IP20

Torx Plus Bit - IP20

IP20 Torx Plus for installing and removing Sig Sauer factory P229 Torx Plus grip screws. Standard 1/4" drive. Made in Germany.

WT71620

In stock

$1.99

Hex Head Bit - 3/32"

Hex Head Bit - 3/32"

3/32" hex Head Bit for installing and removing grip screws. Fits SIG P226, P228, P229, P238, P938 and P239 Hogue grip screws along with Wilson Combat 1911 and various other grip screws. Standard 1/4" drive. Made in Germany.

WT71330

In stock

$1.99

Whia Tools Magnetizer and Demagnetizer

Whia Tools Magnetizer and Demagnetizer

Instantly magnetize or demagnetize steel tools and small parts. Utilizes powerful C8 industrial ceramic magnets. No batteries required. Size is 2" x 2" x 1". The inexpensive Wiha Tool magnetizer/demagnetizer is an essential workbench tool!

WT40010

In stock

$5.95

Whia Tools Premium Split Head Mallet

Whia Tools Premium Split Head Mallet

Excellent non-marring mallet for the work bench. 1.2" face size with both soft and hard heads. Handle is made from hickory hardwood and approximately 9.25" long. Made in Germany.

WT83230

In stock

$23.95

Trijicon M16/AR15 Front Sight Adjustment Tool

Trijicon M16/AR15 Front Sight Adjustment Tool

Trijicon M16/AR15 Front Sight Adjustment Tool

AC50002

In stock

$8.95

Hoppe's Utility Cleaning Brush - NYLON

Hoppe's Utility Cleaning Brush - NYLON

Great for cleaning breech faces and those hard to reach areas like forcing cones.

BOA1380

In stock

$2.45

Hoppe's Utility Cleaning Brush - PHOSPHOR BRONZE

Hoppe's Utility Cleaning Brush - PHOSPHOR BRONZE

Great for cleaning breech faces and those hard to reach areas like forcing cones.

BOA1380P

In stock

$2.79

Uncle Mike's Gun-Tite Removable Adhesive - Medium Strength - Blue

Uncle Mike's Gun-Tite Removable Adhesive - Medium Strength - Blue

Uncle Mike's Medium Strength threadlocker seals and bonds against vibration, shock and moisture. Sets at room temperature. Works on all metal parts. High solvent resistance. Ideal for securing scope mounts, loose or worn screws, etc.

16310

In stock

$5.99

Glock Rear Adjustable Sight Screwdriver

Glock Rear Adjustable Sight Screwdriver

Small screwdriver for rear adjustable Glock sights. Factory Glock part.

6635

In stock

$2.49

Safariland Professional Gunsmith Screwdriver Set - 32 Piece

Safariland Professional Gunsmith Screwdriver Set - 32 Piece

This Safariland screwdriver set should provide the right bits to get most gunsmith jobs done. Hollow ground flathead bits, Allen bits, star bits, phillips head bits and a magnetic bit holder.

T0045

In stock

$19.99

Combo Bit Set - 3 Bits

Combo Bit Set - 3 Bits

Combination Bit set for many common grip grip screws. Includes 3/32" Hex Bit, 1/8" Hex Bit and IP20 Torx Plus Bit. Standard 1/4" drive. Made in Germany.

WT1832ip20

In stock

$3.99

Glock Disassembly Tool

Glock Disassembly Tool

Glock Factory Armorer's Tool used in disassembly of Glock Pistols.

GT03374

In stock

$8.95

Dial Caliper, 6 inch

Dial Caliper, 6 inch

An inexpensive option for precision measurements. Check OAL when reloading, measure gun parts or any other measurement that requires a precision value. .001" graduations, stainless steel and shock-proof. Comes with a protective carry case. Made in China.

01400

In stock

$19.99

Glock Front Sight Tool - FACTORY TOOL

Glock Front Sight Tool - FACTORY TOOL

3/16" Hex Nut Tool made by Glock for front sight removal and installation. The handle provides a positive grip to easily remove or install your sights. Not for long slide models. Gunsmith installation is recommended.

SP05686

In stock

$39.99

Wheeler Engineering Nylon/Brass Hammer

Wheeler Engineering Nylon/Brass Hammer

Features both a 1" brass face for driving pins and punches and a non-marring 1" nylon face that is great for pin alignment and other uses where a steel hammer is not appropriate. 11" overall length.

711016

In stock

$16.99

AR-15 Front Sight Wrench

AR-15 Front Sight Wrench

AR15 front sight wrench designed for for adjusting the elevation on the front sight of your AR-15.


For A1 models with 5 prongs.

078-015-001

In stock

$8.99

Armorer Tools

Gunsmiths and armorers – time away from the workshop is well spent if you’re shopping our site, because we’ve got the tools to make tasks easier! Start off or expand your collection of armorer tools with a multi-piece armorer’s punch set that includes hammers, as well as steel, brass and delrin punches. Purchase handy pin and roll pin punches in smaller sets. If you’ve got a Glock gun, take a look at the factory armorer’s tool used to disassemble Glock pistols. In addition, we stock an assortment of Glock parts too. A padded bench mat creates the perfect protective place to work on handguns. Once your workspace is covered, use a multipurpose, combination armorer tool for Sig Sauer handguns. It’s got the right screwdriver tips for everything Sig Sauer gunsmiths may need from taking out grip screws to installing a mainspring.

Gunsmithing Tools Equal Repairs Done Right

If you work on guns, you know the right gunsmithing tools make a world of difference! The 1911 versatile tool from Wilson Combat is a gunsmithing tool value; it’s actually an array of tools in one compact unit. Disassemble and assemble a 1911 automatic pistol with this tool. We’ve also got calipers and bits, plus a combination bit set that works on those common grip screws. Safeguard AR-15 rifles while working on them with lower receiver vice blocks and upper receiver action blocks. Keep a multi-use AR-15 tool nearby to assist you. A comprehensive 1911 tool kit supports pistol work that requires pin punch, hex drives and a variety of screwdriver sizes. For rounding out your tool kits, also take a minute to see our sight installation tools.