3/16" Hex Nut Tool made by Glock for front sight removal and installation. The handle provides a positive grip to easily remove or install your sights. Not for long slide models. Gunsmith installation is recommended.

Features both a 1" brass face for driving pins and punches and a non-marring 1" nylon face that is great for pin alignment and other uses where a steel hammer is not appropriate. 11" overall length.

AR15 front sight wrench designed for for adjusting the elevation on the front sight of your AR-15.

For A1 models with 5 prongs.

The Ghost Enhanced Armorer Tool Kit features everything you need to completely disassemble your Glock pistol. Kit comes with 2.5mm punch with enhanced grip for better leverage, and clear armorers 1/3 plate.

The Lyman Electronic Trigger Pull Gauge allows for accuracy to 1/10 ounce over a working range of 0 to 12 pounds. The Digital Trigger Pull Gauge is equipped with a large, easy to read LCD display and is push button operated for zero, clear and averaging functions. It can also can be converted to read in kilograms. Unlike other gauges, there are no weights or sliding pointers to worry about. Simply place the gauge on the trigger and pull! Lyman's Digital Trigger Pull Gauge accurately records the results. You can also take multiple readings and the Digital Trigger Pull Gauge will tell you the average weight for the string. This is the perfect tool for target shooters, silhouette shooters, gunsmiths, hunters or anyone who wants to adjust their trigger pull weights accurately and easily.

The Wheeler Engineering 89 piece professional gunsmith screwdriver set covers all the bases when it comes to working on firearms. All bits are made from S2 tool steel and hardened to 56-58 Rockwell “C.”

Kit Includes:

1. 54 Hollow-ground Flat Bits
2. 15 Specialty Gunsmith Bits
3. 8 Allen Bits
4. 4 Phillips Bits
5. 3 Torx Bits
6. Square to Hex Adapter
7. Bit Extension
8. Regular No-Slip Handle
9. Short No-Slip Handle
10. Case w/ Bit Location Guide

The Wheeler Hammer and Punch Set includes a polymer/brass hammer, eight precision brass punches, four steel punches, and two plastic punches. A great kit for driving pins or drifting sights while and the range or bench.

Kit Includes

1. Hammer with brass and polymer face
2. 8 Brass punches: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16"
3. 4 Steel punches: 2 each of 1/16" and 3/32"
4. 2 Composite punches: 15/64" and 3/8"
5. Molded plastic storage case

Ideal for firearm assembly and disassembly, the Wheeler Universal Bench Block features a variety of notches, grooves, and holes to assist you in installation of various parts and accessories. Made of non-marring urethane. Perfect for use on 1911 pistols as well as other firearms such as 10/22s. Features a main spring removal recess and boss, barrel link removal channel, rear sight drift channel, and front sight staking channel.

The Wheeler Engineering AR-15 Bench Block is ideal for securing your AR during assembly and disassembly. Made of non-marring urethane, it features various notches, grooves, and holes on both sides for the upper receiver, lower receiver, front sight and charging handle. The perfect tool for your next AR-15 build! Ideal for changing or adjusting triggers, removing or installing pins, detents, and springs. Works with ambidextrous safety lower receivers.

The Wheeler Engineering® Roll Pin Punch set is machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16″, 1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″, 5/64″, 1/16″ punches in a nylon pouch.

• 9-piece set 1/16″ through 5/16″
• Hardened Steel construction
• Hemispherical Tip
• Fitted Nylon Storage Pouch

Less than half the size of comparable gunsmithing screwdriver sets!

The Wheeler® Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It’s also the perfect size to include on your trips to the range and the field.

Included with the standard, Phillips, hex, and torx bits, is a 2″ long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4″ square drive sockets and other attachments.

The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

The Frankford Arsenal Stainless Steel Dial Caliper is a necessary tool for the precise measurements required for reloading ammunition.

Features:

1. Accurate to within .001"
2. 0-6" measurement range
3. Heavy duty protective case
4. Locking adjustment
5. Measure external, internal, and depth
6. Thumb dial for precise adjustments
7. Precision milled and ground surfaces for precise accuracy

This padded bench mat is perfect for working on your pistols. The padding helps protect your finish and keep your work in place. Measures 17" X 11" in size and has worldwide Glock contact information as well as a G17 Gen 5 exploded drawing and parts list. The Gen5 Exploded Diagram Bench Mat Includes: Gen 5 pistol diagram, parts list, lubrication guide, & Safe Action safety mechanisms.

American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

A Multipurpose tool for Sig Sauer handguns featuring a correctly shaped screwdriver tip for removing grip screws, installation and removal of magazine catch and sear spring and a tip to aid in mainspring removal and installation. 5/16" drive. The screwdriver may not fit the older style P226 screws with the smaller .115" shank.

Tighten to the specified torque and not a smidgen more! Adjustable in 1 in/lb increments, this tool is easy to read, simple to set, and offers fast, accurate tension whenever and wherever you need it.

INCLUDED IN THE BOX

• 5 Hex Bits
  • 9/64"
  • 3/16"
  • 2 mm
  • 2.5 mm
  • 3 mm
• 3 Torx Bits
  • T10
  • T15
  • T25
• 1 Screwdriver Bit
• 10 mm wide
• 1 Socket
• 1/2 " Socket
• 1/4" Socket Adapter