White Label Armory - Manufacturers - Top Gun Supply

Products

White Label Armory AR15 Trigger

White Label Armory AR15 Trigger

Whether you want to try your hand at your own trigger job, or just want to keep a spare around, our AR15 trigger is an excellent economical choice! Properly cast right here in the USA, not an imported MIM piece!
  • Cast and heat treated per milspec
  • Engagement surfaces precisely milled
  • Phosphate Coated
  • Perfect for your standard build
  • 100% USA Made

4001-0607-002

Out of stock

Out of stock
White Label Armory Complete Upper Receiver, 5.56mm w/ 16" Barrel 15" MLOK

White Label Armory Complete Upper Receiver, 5.56mm w/ 16" Barrel 15" MLOK

The perfect upper for your lower, without all the tools required to build it. Our complete upper receivers are made from the highest quality USA produced components out there. All of our complete uppers are fully assembled, test fired and ready to pin to the lower receiver of your choice. As with all of our products, these are guaranteed for life.

  • 16" 4150CMV Barrel - 1:7 twist - stress relieved - mid-length gas system - nitride finish
  • 15" Standard free float MLOK handguard
  • Forged 7075-T6 upper receiver - hard coat anodized
  • WLA Bolt Carrier Group - 9310 bolt - billet extractor - H&M nitride finish
  • A2 Flash Hider - nitride finish
  • Billet charging handle
  • 100% USA made

4027-3410-015

Out of stock

Out of stock
White Label Armory M16 / AR15 Extractor - 5.56

White Label Armory M16 / AR15 Extractor - 5.56

White Label Armory M16 / AR15 Extractor - 5.56. Yet another piece that can leave you in a bind if it breaks. Keep an extra around to keep you and your buddies in the action!
  • Fits all standard AR15/M16 5.56 & .223 bolts
  • Machined from 4140 bar stock
  • Heat treated
  • Shot peened
  • Phosphate coated for reliability
  • 100% USA Made

2020-0307-001

Out of stock

Out of stock
White Label Armory M16 Bolt Carrier Group - 5.56 Billet Extractor 9310 Bolt - Black Nitride

White Label Armory M16 Bolt Carrier Group - 5.56 Billet Extractor 9310 Bolt - Black Nitride

White Label's house made M16 bolt carrier group is the perfect BCG for your next build. Properly built, no corners cut, 100 percent US made. With our lifetime guarantee, you can't go wrong.
  • 8620 M16 style carrier
    • H&M Black Nitride finish
    • Properly heat treated
    • Final grind before plating
  • 9310 5.56/.223 bolt
    • Heat treated
    • Shot peened
    • H&M Black Nitride finish
    • MPI
  • 4140 billet gas key
    • H&M Black Nitride Finish
    • Properly seated with Grade 8 fasteners
    • Properly staked to ensure reliability
  • 4140 Cam Pin nitride treated for wear resistance
  • Billet Machined Extractor
    • Machined from solid 4140 bar stock, heat treated and shot peened
    • Phosphate coated for reliable extraction
    • Extractor insert included
    • O-Ring included
  • Firing pin precision machined from 17-4 H-900 Stainless Steel
  • 100% USA Made

2009-0701-001

Out of stock

Out of stock
White Label Armory AR15 Magazine Catch Button

White Label Armory AR15 Magazine Catch Button

White Label Armory AR15 Magazine Catch Button.
  • Manufactured to milspec dimensions
  • For use on M16 and AR15 style firearms
  • Made from 6061-T6 aluminum bar stock
  • Anodized black
  • Weight: .05 ounces
  • 100% USA Made

4001-1009-001

In stock

$2.00

White Label Armory AR15 MLOK Handguard 10" - BLK

White Label Armory AR15 MLOK Handguard 10" - BLK

Machined in house from our custom 6061-T6 extrusion, White Label's house brand free float hand guards will provide you with a lifetime of service. Unlike many manufacturers who simply cut holes and slots in their extrusion, White Label machines every surface of the exterior to ensure a uniform and flat surface. Our 4140 steel barrel nut does not need to be indexed for gas tube clearance, and installs with a standard castle nut wrench. No custom made tooling required. Lifetime Guarantee

AR15 / M16 Hand Guard - 10" MLOK

  • Machined from 6061-T6 aluminum
  • Hard coat anodized per milspec
  • 4140 steel barrel nut
  • Top rail length: 9.85 inches
  • Weight with mounting hardware: 8.6 ounces
  • MLOK mounting points at 3:00, 6:00, and 9:00

4005-1009-103

In stock

$109.95

White Label Armory AR15 Pistol Kit, 5.56mm w/ 10.5" Barrel 10.5" MLOK - No Receiver

White Label Armory AR15 Pistol Kit, 5.56mm w/ 10.5" Barrel 10.5" MLOK - No Receiver

Everything you need to build out a high quality AR15 carbine using whatever lower receiver you want. Built, test-fired, and quality checked in house, our AR15 pistol kits will provide you a lifetime of reliable service. We use only the finest USA manufactured parts. Each unit is assembled with care and fully tested to ensure that your build will function the first time. Compatible with any mil-spec dimension AR15 lower receiver.

  • Upper Receiver
    • 10.5" 4150CMV Barrel - 1:7 twist - carbine gas system - nitride finish
    • 10.5" free float MLOK hand guard with one rail section
    • Forged 7075-T6 upper receiver
    • Nitride finish BCG with 9310 bolt
    • WLA A2 style flash hider
  • Lower Parts Kit
  • Buffer Tube Kit
    • Mil-spec dimension buffer tube
    • Carbine weight buffer
    • Carbine buffer spring
    • Standard end plate and castle nut
  • SB Tactical SBA3 Brace
  • 100% USA made
  • No FFL Required

4040-3410-009

In stock

$649.95

White Label Armory AR15 Flash Can

White Label Armory AR15 Flash Can

The White Label Armory AR15 flash can is perfect for those applications that do not need recoil or flash reduction, but still need to focus muzzle blast and flash down range. Our flash cans are slim enough to fit under most hand guards for that classic "SD" look. Because there is no direct impact on the muzzle device, the lightweight aluminum is not damaged during firing.
  • Machined from 6061-T6 aluminum
  • Hard coat anodized
  • Threaded 1/2-28
  • Outside diameter: 1.20"
  • Length: 3.25"
  • Weight: 3.40z
  • Installation with or without a crush washer and 3/4" wrench
  • For use on 9mm or smaller diameter firearms only
  • 100% USA Made

4017-1009-001

In stock

$32.95

White Label Armory AR15 Takedown and Pivot Pin Detent

White Label Armory AR15 Takedown and Pivot Pin Detent

White Label Armory AR15 Takedown and Pivot Pin Detent
  • Machined to milspec dimensions
  • Cadmium Plated
  • 100% USA Mad

4001-1510-001

In stock

$1.00

White Label Armory AR-15 Lower Parts Kit

White Label Armory AR-15 Lower Parts Kit

The White Label Armory lower parts kits contain all high quality, 100% USA produced components, manufactured to exacting standards. Each kit is guaranteed to fit your mil-spec dimension lower receiver. We don't use foreign made parts, polymer parts, or MIM parts. These are quality kits at an excellent price.AR15 Lower Parts Kit - Complete

  • Hammer
  • Trigger
  • Disconnect
  • Bolt catch
  • Bolt catch detent
  • Selector
  • Selector detent
  • Magazine catch assembly
  • Fire control group pins (2)
  • Takedown pin
  • Pivot 9in
  • Pivot pin detents (2)
  • Buffer retainer pin
  • Complete spring kit
  • Trigger guard assembly
  • A2 pistol grip assembly
  • 100% USA Made

4002-1510-001

In stock

$59.95

White Label Armory AR15 Disconnect

White Label Armory AR15 Disconnect

A poorly machined disconnect can cause issues ranging from failure to fire, to dangerous hammer follow. Our disconnects are cut to the correct dimensions to ensure the proper function of your rifle.
  • Manufactured to milspec dimensions
  • Fits semi-automatic AR15 and AR10 fire control groups
  • Weight .28 ounces
  • Phosphate Coated
  • 100% USA Made

4001-1507-002

In stock

$9.95

White Label Armory AR15 Selector and Ejector Spring

White Label Armory AR15 Selector and Ejector Spring

White Label Armory AR15 Selector and Ejector Spring. One of the most common caused for a "failure to eject" is a worn or broken ejector spring. Springs are considered "wear" items and have a limited service life. Make sure you keep spares on hand for easy and quick replacement.
  • Manufactured to milspec dimensions
  • For use on M16, AR15, and AR10, selectors
  • For use on M16 and AR15 ejectors
  • 100% USA Made

2004-1900-003

In stock

$1.00

White Label Low Profile Gas Block .750 - Set Screw

White Label Low Profile Gas Block .750 - Set Screw

The White Label 4140 gas block will provide you with a lifetime of service.

.750" Low Profile Gas Block - Set Screw

  • Machined from 4140 pre-hardened steel
  • H&M Black Nitride coated
  • Closed end gas tube hole
  • Chamfered roll pin hole for easy assembly
  • Includes gas tube roll pin
  • 100% USA Made

4014-0501-102

In stock

$17.95

White Label Mid Length Gas Tube

White Label Mid Length Gas Tube

AR15 / M16 / AR10 Gas Tube - Mid Length
  • Fits all standard AR type Mid length gas systems
  • Precisely machined from seamless stainless steel tubing
  • 100% USA Made

4013-2300-003

In stock

$11.95

White Label Rifle Length Gas Tube

White Label Rifle Length Gas Tube

AR15 / M16 / AR10 Gas Tube - Rifle Length
  • Fits all standard AR type rifle length gas systems
  • Precisely machined from seamless stainless steel tubing
  • 100% USA Made

4013-2300-004

In stock

$13.95

White Label Armory AR-15 Buffer - H1

White Label Armory AR-15 Buffer - H1

A little tungsten goes a long way. With one tungsten and two steel weights, the H1 aids in feeding and slows down the cyclic rate on your M16.AR15 / M16 Buffer - H1 Heavy Weight

  • Fits all standard AR15/M16 carbine buffer tubes
  • Weight: 3.8 oz
  • Manufactured to mil-spec dimensions
  • Hard coat anodized
  • 100% USA Made

4007-1009-002

In stock

$20.95

White Label Armory AR-15 Buffer - H3

White Label Armory AR-15 Buffer - H3

Three tunsten weights give our H3 buffers about as much weight as you can pack into them. Perfect for slowing down an overgassed M16 or for aiding in feeding those fat .30 caliber bullets.AR15 / M16 Buffer - H3 Heavy Weight

  • Fits all standard AR15/M16 carbine buffer tubes
  • Weight: 5.4 oz
  • Manufactured to mil-spec dimensions
  • Hard coat anodized
  • 100% USA Made

4007-1009-004

In stock

$38.95

White Label Armory AR15 Pivot Pin

White Label Armory AR15 Pivot Pin

These nitride treated pivot pins are cut from solid stock on a precision Swiss CNC machine, tumbled for a smooth finish, and nitride treated for great looks and long lasting life. The ends are dimpled to aid in disassembly when using a punch or other tool.
  • Machined to milspec dimensions
  • Dimpled end to aid in disassembly
  • Black Nitride coated
  • 100% USA Made

4001-0601-002

In stock

$4.25