Products
Radian Weapons Enhanced BCG 5.56mm - Black
|
The Enhanced Bolt Carrier Group for AR15/M16 platform weapons was designed to minimize carrier tilt and reduce friction inside the upper receiver by relocating key bearing surfaces. All materials, tolerances, and coatings meet or exceed milspec standards for performance, reliability, and durability.
|
R0081
Out of stock
Radian Weapons Extended Bolt Catch - Black
|
The Radian Extended Bolt Catch significantly improves the ergonomics and controls of your weapon. Featuring an aggressively textured surface, ensuring a positive grip and engagement of the bolt release. The enlarged lower bolt catch paddle is tilted outward, providing increased accessibility and ease of use. The Extended Bolt Catch is compatible with forged Mil-Spec receivers and some billet receivers. The part is constructed from heat-treated tool steel and finished with black nitride, ensuring maximum durability and resistance to wear and corrosion. With a weight of only 0.49 oz., this extended bolt catch is lightweight and adds minimal bulk to your AR-15 while providing enhanced functionality and accessibility of the rifle's bolt release. INCLUDES: 1 - Extended Bolt Catch 1 - Spiral Roll Pin |
R0323
Out of stock
Radian Weapons Raptor AR15/M4 5.56 Ambidextrous Charging Handle - Matte Black
|
The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized. |
R0001
Out of stock
Radian Weapons Raptor LT AR15/M4 5.56 Ambidextrous Charging Handle - Black
|
The Radian Raptor-LT uses the same patented ambidextrous functionality as its predecessor. The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight and durability. Compatible with AR15/M16 or AR10/SR25-pattern rifles. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. |
R0148
Out of stock
Radian Weapons Raptor LT AR15/M4 5.56 Ambidextrous Charging Handle - FDE
|
The Radian Raptor-LT uses the same patented ambidextrous functionality as its predecessor. The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight and durability. Compatible with AR15/M16 or AR10/SR25-pattern rifles. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. |
R0149
Out of stock
Radian Weapons Raptor SD AR15/M4 5.56 Ambidextrous Charging Handle - Black
|
The silencer-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooters face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. |
R0006
Out of stock
Radian Weapons Sig P365 X-Macro Backstrap & Magwell
|
The Radian P365 XMACRO Backstrap and Magazine Well were designed in tandem to provide users with a rock-solid and enhanced grip on one of the most popular everyday-carry firearms on the market today – The Sig Sauer P365.
The P365 XMACRO Magazine Well also aids in hand positioning by providing another key point of contact at the bottom of the grip module. The enhanced feed walls ensure reliable tactical and administrative reloading while maintaining a streamlined design. The low-profile characteristics of the system limits printing while concealed carrying as well as reducing snagging occurrences during holstering and unholstering. The Magazine Well maintains compatibility with all OEM XMACRO magazines and base plates/extensions. The Radian P365 XMACRO Backstrap and Magazine Well install using a precision machined dovetail interface with spring-loaded retention stud to lock the two components in place – no screws to come loose or break. MATERIALS: INCLUDES:
|
H0014
Out of stock
Radian Weapons Talon 45/90 Ambi Safety Selector - Black
|
The Talon ambidextrous safety selector is a modular design that can be installed as a standard 90 or as a 45 short throw by simply rotating the shaft 180 inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place, no screws to come loose or break. The Talon is compatible with most semi-automatic AR15/AR10/SR25 pattern rifles. Made in the USA. |
R0018
Out of stock
Radian Weapons Raptor AR15/M4 5.56 Ambidextrous Charging Handle - FDE
|
The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized. |
R0003
In stock
$99.95
Radian Weapons Vertex Trigger - Curved
|
The Radian Vertex Trigger was designed with functional ergonomics at the center of the design philosophy. The trigger bow is positioned forward of the traditional bow location, enhancing the shooter’s ability to make a straight-back trigger break, and reducing potential for “left and down” or “right and down” trigger pull. The single stage Vertex Trigger features a crisp, 3.5-4 pound break and short reset. The Vertex Trigger’s bow is constructed from 1144 carbon steel, and the hammer from precision machined S7 shock resistant tool steel. The hammer is then wire-EDM finished in the interface areas. The components are captured in a lightweight aluminum housing. The Vertex Trigger is compatible with the AR15 platform, with a design that prevents pin walkout even when using standard hammer and trigger pins. |
AAC-0016
In stock
$229.95