Sig Sauer P229 Gun Parts

Sig Sauer P229 Gun Parts

Products

Sig Sauer SRT Kit P226, P228, P229, P227

Sig Sauer SRT Kit P226, P228, P229, P227

The Sig Sauer P226, P227, P228 and P229 SRT Kit includes all of the necessary parts to reduce the reset on you Sig Sauer pistol. We recommend installation to be performed by a certified armorer.

PKIT-SRT-226-227-229

In stock

$44.00

SIG SAUER Factory Guide Rod - BLACK - P228/229/250C

SIG SAUER Factory Guide Rod - BLACK - P228/229/250C

SIG factory carbon steel Recoil Spring Guide Rod for P228, P229 and P250C 9mm/.40S&W/.357SIG. Note: Does not fit P250C .45ACP.

GUIDE-4

In stock

$9.95

SIG Standard Trigger - P226, P228, P229 Black

SIG Standard Trigger - P226, P228, P229 Black

SIG factory Standard Trigger for P226, P228, P229, 227 and recent production P220 with wide (10mm) trigger. A Short Trigger for the P220 SAO is not available.

TRIGGER-6

In stock

$33.95

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Grayguns Fat Guide Rod - Sig P228/P229 - Super Black

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Super Black Finish

GGGR-BK229

In stock

$25.00

Sig Sauer Safety Lever - P225/226/228/229/239

Sig Sauer Safety Lever - P225/226/228/229/239

Sig Sauer factory Safety Lever for P225, P226, P228, P229 and P239 models.

LEVER-15

In stock

$9.95

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

Grayguns Classic Standard Curved Trigger - Sig Sauer P-Series

The P22xCT Classic Standard Trigger adds over-travel adjustability to our original design. Utterly indestructible, the P22xCT Classic Standard is machined from tough steel, carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function.

Our intermediate trigger shape optimizes both SA and DA control for optimal control, and is more comfortable than the factory short trigger it replaces. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Will not fit SIG Pro, X5 Allround, P225 / P6, P239 or most SAO models. Also will not fit older P220 with 8mm wide trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

This product was previously referred to as the P-Series Precision Adjustable Intermediate Trigger (P-SAIT).

TRG-SIG-22X-AIC

In stock

$39.00

Grayguns Fat Guide Rod - Sig P228/P229 - Stainless

Grayguns Fat Guide Rod - Sig P228/P229 - Stainless

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Stainless

GRD-SIG-22C-ST

In stock

$20.00

Sig Sauer Mainspring - P225/226/228/229/239 Old Style

Sig Sauer Mainspring - P225/226/228/229/239 Old Style

Sig Sauer factory Mainspring (Hammer Spring) for all caliber P225, P226, P228, P229 (old style) DA/SA and P239 models.

MAINSPRING-2

In stock

$9.95

Wolff Hammer Spring - SIG P220/225/226/228/229

Wolff Hammer Spring - SIG P220/225/226/228/229

P220 above Serial # 219166

  • Models without plastic retainer/base
  • Factory Standard 24 LB

Sig P225, P226, P228 and P229

  • Factory Standard 24 LB

285 - 17lbs

In stock

$3.99

Sig Sauer Sear Spring - P220, P225, P226, P228, P229, P239, P245

Sig Sauer Sear Spring - P220, P225, P226, P228, P229, P239, P245

Sig Sauer factory Sear Spring for all DA/SA Classic P Series models.

1202437

In stock

$7.95

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-ELS-STA-DAK

In stock

$179.00

Sig Sauer Support Plate - P220, P225, P226, P228, P229

Sig Sauer Support Plate - P220, P225, P226, P228, P229

Sig Sauer factory Support Plate for all standard P series models except P239.

PLATE-1

In stock

$4.95

Sig Sauer Slide Catch Lever - P226, P228, P229

Sig Sauer Slide Catch Lever - P226, P228, P229

Sig Sauer factory Slide Catch Lever for P226, P228 and P229 models.

1200779

In stock

$29.95

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer factory Sear for P227, P225, P226, P228, P229 and P239 DA/SA and DAK models.

1200352-R

In stock

$49.95

Sig Sauer SRT Safety Lever - P226/228/229

Sig Sauer SRT Safety Lever - P226/228/229

Sig Sauer SRT Safety Lever for the P226, P228, and P229 series pistols. Will NOT work on P227 series.

1200488-R

In stock

$9.95

Hogue Grip Screw - P226/P228/P229- STAINLESS

Hogue Grip Screw - P226/P228/P229- STAINLESS

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26019

In stock

$8.49

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer factory ejector for P224, P228, P229, P239, P226 .40S&W and P226 .357SIG models.

EJECTOR-2

In stock

$12.95

Sig Sauer Hammer Stop - P225/228/229

Sig Sauer Hammer Stop - P225/228/229

Sig Sauer factory Hammer Stop for P225, P228 and P229 models.

HAMMER-STOP-3

In stock

$6.95