Sig Sauer P226 Gun Parts

Sig Sauer P226 Gun Parts

Products

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

In stock

$74.00

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series Hybrid

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series Hybrid

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function. This is the Hybrid trigger shoe.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-SIG-ELS-AHT-DAK

In stock

$169.00

Sig Sauer Decocking Lever Bearing - P226, P228, P229, P239, P220

Sig Sauer Decocking Lever Bearing - P226, P228, P229, P239, P220

Sig Sauer factory Decocking Lever Bearing for P220, P226, P228, P229 and P239 models.

BEARING-1

In stock

$12.95

Sig Sauer Outer Pin H.D. - All Carbon Slides

Sig Sauer Outer Pin H.D. - All Carbon Slides

Sig Sauer factory Outer Roll Pin for all carbon steel slide models.

PIN-4

In stock

$12.95

Sig Sauer Magazine Catch - P226, P228, P229 Blue

Sig Sauer Magazine Catch - P226, P228, P229 Blue

Sig Sauer factory Magazine Catch for P226, P228 and P229 models.

MAG-CATCH-2

In stock

$19.95

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer Sear - P227/P225/226/228/229/239

Sig Sauer factory Sear for P227, P225, P226, P228, P229 and P239 DA/SA and DAK models.

SEAR-2

In stock

$19.95

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer Ejector - P228, P229, P239, P226-40

Sig Sauer factory ejector for P224, P228, P229, P239, P226 .40S&W and P226 .357SIG models.

EJECTOR-2

In stock

$21.99

Wolff Hammer Spring - SIG P220/225/226/228/229

Wolff Hammer Spring - SIG P220/225/226/228/229

P220 above Serial # 219166

  • Models without plastic retainer/base
  • Factory Standard 24 LB

Sig P225, P226, P228 and P229

  • Factory Standard 24 LB

285 - 17lbs

In stock

$3.99

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Grayguns P320 Adjustable Hybrid Trigger - TIN Gold

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program. Designed for demanding duty use, with the toughness to outlast your pistol, our P320 triggers are guaranteed for life.

  • Hybrid face design
  • Preserves factory sear engagement and all mechanical safety values
  • Adjustable over-travel eliminates gross movement after the sear is released and reduces trigger travel to reset
  • Enhanced Leverage geometry reduces pull weight by 30% with stock springs
  • Smoother takeup, sear release and reset sensation
  • Optimal 90⁰ sear release
  • Supports Voluntary Upgrade rough handling characteristics for assurance and reliability
  • Designed for use with the SIG factory trigger bar spring
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

  • High hardness and adhesion
  • Good chemical resistance
  • Good temperature resistance in air
  • Relatively low thermal conductivity
  • Attractive, golden color

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-SIG-320-AHT-TIN

In stock

$99.00

Sig Sauer Trigger Bar - P226, P228, P229 DA/SA

Sig Sauer Trigger Bar - P226, P228, P229 DA/SA

Sig Sauer factory Trigger Bar for P226/228/229 DA/SA and DAO models.

*Note, this is for the older German P-series pistols.

TRIGGER-BAR-2

In stock

$54.99

Sig Sauer Trigger Pivot Pin - P225/226/228/229

Sig Sauer Trigger Pivot Pin - P225/226/228/229

Sig Sauer factory Trigger Pivot Pin for P225, P226, P228 and P229 models.

34225180

In stock

$12.95

Hogue Grip Screw - P226/P228/P229- BLUE

Hogue Grip Screw - P226/P228/P229- BLUE

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26009

Out of stock

Out of stock
Hogue Grip Screw - P226/P228/P229- STAINLESS

Hogue Grip Screw - P226/P228/P229- STAINLESS

Set of (4) Allen Head replacement grip screws for your Sig Sauer P226, P228 or P229 pistols. Uses 3/32" Allen Wrench.

26019

Out of stock

Out of stock
Sig P224P226/228/229 Short Trigger-NICKEL

Sig P224P226/228/229 Short Trigger-NICKEL

Factory Nickel Short Trigger for the Sig P226, P224, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance.

TRG-22690-NKL-SHORT

Out of stock

Out of stock
Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Sig P226/P228/P229/P220/P224/P227 Short Trigger-BLACK

Factory Black Short Trigger for the Sig P226, P224, P227, P228 and P229 and recent production P220's. A Short Trigger for the P220 SAO is not available. 10mm wide. The SIG SAUER® Short Trigger is for shooters with small hands and was designed to enhance trigger manipulation for better shooting performance. Phosphate.

TRIGGER-7

Out of stock

Out of stock
Sig Sauer Decocking Lever - P227, P226, P228, P229 PHOSPHATE

Sig Sauer Decocking Lever - P227, P226, P228, P229 PHOSPHATE

Sig Sauer factory Decocking Lever for P227, P226, P228 and P229 models. Phosphate finish.

1200622

Out of stock

Out of stock
Sig Sauer Hammer - P220/225/226/228/229/245  NICKEL

Sig Sauer Hammer - P220/225/226/228/229/245 NICKEL

Sig Sauer factory Hammer for P220, P225, P226, P228, P229 and P245 models, nickel finish. Replaces part #34280325N

1200482

Out of stock

Out of stock
Sig Sauer Hammer - P220/225/226/228/229/245 Black Super Finish

Sig Sauer Hammer - P220/225/226/228/229/245 Black Super Finish

Sig Sauer factory Hammer for P220, P225, P226, P228, P229 and P245 models, black super finish.

1200454

Out of stock

Out of stock