TRIGGERS - STANDARD

TRIGGERS - STANDARD

Products

Sig Sauer Flat Trigger, P365

Sig Sauer Flat Trigger, P365

The SIG SAUER P365 factory flat trigger is a direct replacement to your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull. Sig Sauer Flat Trigger, Trigger Bar Spring and Trigger Pin included.

KIT-365-FLAT-TRIGGER

In stock

$44.95

SIG Standard Trigger - P239 Black

SIG Standard Trigger - P239 Black

SIG factory Standard Trigger for P239 models.

34239204

In stock

$49.95

Sig Sauer Flat Trigger - P320 - BLK

Sig Sauer Flat Trigger - P320 - BLK

The SIG SAUER P320 factory flat trigger is a direct replacement to your stock trigger. The flat trigger design gives shooters a lower position on the trigger, which will increase leverage for a smoother, more consistent pull.

TRG-320-FLAT-BLK

In stock

$44.95

SIG Standard Trigger - P220, P245 Black - 8mm

SIG Standard Trigger - P220, P245 Black - 8mm

SIG factory Standard 8mm serrated Trigger for older production P220 with the narrow trigger and P245 models. Made in Germany.

34221210

In stock

$39.95

SIG Standard Trigger - SIGPRO Black

SIG Standard Trigger - SIGPRO Black

SIG factory Standard Trigger for SIGPRO models.

34290907

In stock

$39.95

Grayguns P320 Adjustable Hybrid Trigger

Grayguns P320 Adjustable Hybrid Trigger

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program.

Specifications and Features

  • Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program
  • Adjustable over-travel to help reduce reset and take out wasted motion
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

TRG-SIG-320-AHT

In stock

$89.00

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

Grayguns Competition Hybrid Trigger Kit - Sig Sauer P320

The new Grayguns P320 Competition Trigger System delivers the unequalled smooth feel and hot performance of our custom action work in a cleverly engineered drop-in kit.

Paired with Bruce Gray’s exclusive hybrid trigger design, this is the most advanced drop in competition system available for all post/Voluntary Upgrade P320 models.

The P320 Competition Trigger System is intended for installation by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit.

The kit includes the following exclusive Grayguns elements:

  • Our newly designed hybrid trigger with built in over-travel adjustment
  • Precision-ground custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns original competition sear springs
  • Intermediate competition sear springs
  • Original soft competition trigger bar spring
  • New snappy-reset trigger bar spring
  • Micro-polished, extended safety lever pin

Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces trigger pull weight to suit your preferences, with additional springs provided to yield custom pull weights.
  • Adjustable over-travel, stops at optimum trigger face angle
  • Smoother takeup and clean release sensation, with clean reset
  • Preserves factory sear face engagement height and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. Note – The safety lever spring is no longer needed in the P320, and is not included in the kit.

SYS-SIG-320-AHT

In stock

$149.00

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Curved Trigger - Sig Sauer P-Series - STEEL BLACK

The Grayguns P-Series Dual Adjustable Curved Trigger is the ultimate trigger upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Bruce Gray has combined the adjustable over-travel feature, unbeatable comfort and control and unrivaled quality of our original OEM SIG Sauer® Legion P22xCT, Classic Standard trigger, with the improved geometry and pre-travel adjustment of our wildly popular P22xST Dual Adjustable Straight Trigger series.

This trigger is the ultimate upgrade for your Legion Series or any modern DA/SA SIG P-Series pistol.

Our Dual Adjustable Curved Trigger

This steel trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. The trigger is guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

Fit Guide

The Dual Adjustable Curved Trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including:

  • X5 All-Round
  • P220 (see exception below)
  • P226
  • P228
  • P229
  • P227, and others.

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

TRG-SIG-22X-DAC

In stock

$69.00

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

Grayguns Enhanced Leverage System ELS - Sig Sauer P Series

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function.

The trigger kit is engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without the need for spring replacements.
  • Reduced over-travel
  • Reduced pre-travel
  • Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.

SYS-ELS-STA-DAK

In stock

$179.00

SIG Standard Trigger - P226, P228, P229 Black

SIG Standard Trigger - P226, P228, P229 Black

SIG factory Standard Trigger for P226, P228, P229, 227 and recent production P220 with wide (10mm) trigger. A Short Trigger for the P220 SAO is not available.

TRIGGER-6

In stock

$39.95

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

Grayguns Competition Curved Trigger Kit - Sig Sauer P320

SIG Sauer® P320 Competition Trigger Kit can now be installed by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit. The kit is specifically designed for guns that have gone through SIG’s Voluntary Upgrade Program. The kit includes the following elements:
  • Precision-ground Grayguns custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
  • Grayguns competition sear springs
  • Grayguns competition trigger bar spring
  • Over-travel stop tube
  • Micro-polished, extended safety lever pin

The Grayguns P320 Competition Trigger Kit yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It yields a trigger pull weight of approximately 3.5 to 5 pounds. The kit with included competition sear is designed exclusively for competition or range use only.

SYS-SIG-320-CT

In stock

$129.00

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Straight

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-ST

In stock

$89.00

Sig Sauer Trigger Group, P365

Sig Sauer Trigger Group, P365

Sig Sauer Trigger Group. Includes Trigger, Trigger Bar, Disconnector, Trigger Bar Spring and Trigger Pin, compatible with Sig Sauer P365.

KIT-365-TRIGGER-GROUP

In stock

$49.95

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

Grayguns Sig Sauer P320 Hard Duty Use Trigger - Curved

The Grayguns P320ST and P320CT triggers are specifically designed for guns that have gone through SIG Sauer’s® Voluntary Upgrade Program. The trigger is available in your choice of straight-face or curved-face design.

The Grayguns P320 trigger yields superior trigger pull results while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities. It is designed for drop-in installation.

P320 Trigger – Straight or Curved – Specifications and Features

  • Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
  • Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant.
  • Designed for use with the SIG factory trigger bar spring
  • Minimal over-travel, stops at optimum trigger face angle
  • Smoother takeup and release sensation
  • Preserves factory sear engagement and mechanical safety values
  • Proven reliable and durable for high-volume professional use
  • Our triggers are externally comparable in appearance to the factory part
  • Limited lifetime warranty on materials and workmanship

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).


TRG-SIG-320-CT

In stock

$89.00

Timney Triggers Sig MPX Straight - 4.5LB

Timney Triggers Sig MPX Straight - 4.5LB

The trigger is factory tuned for 4.5 lb. pull weight, with no creep

The trigger makes use of your rifle's original hammer/trigger pins as well as safety

Single stage trigger

  • Trigger allows you to become more accurate with your rifle
  • No gunsmith needed, easy to install
  • Ready for the range, no adjustments needed
  • No additional parts needed to install trigger
  • Crisp feel

683

In stock

$199.99

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

Grayguns Dual Adjustable Straight Trigger - Sig Sauer P-Series - STEEL BLACK

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

TRG-SIG-22X-DAS

In stock

$69.00

Grayguns Enhanced Trigger Sig Sauer P238 and P938 - PUR

Grayguns Enhanced Trigger Sig Sauer P238 and P938 - PUR

Grayguns specially made enhanced trigger provides an improved design shape, more comfortable feel on your trigger finger and comes in assorted colors to personalize your Sig Sauer P238 or P938. This replacement trigger will fit all variants of the P238 and P938. This is a purple aluminum trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

PX38-PURPLE

In stock

$40.00

Grayguns Enhanced Trigger Sig Sauer P238 and P938 - RED

Grayguns Enhanced Trigger Sig Sauer P238 and P938 - RED

Grayguns specially made enhanced trigger provides an improved design shape, more comfortable feel on your trigger finger and comes in assorted colors to personalize your Sig Sauer P238 or P938. This replacement trigger will fit all variants of the P238 and P938. This is a red aluminum trigger.

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

PX38-RED

In stock

$40.00