MAGAZINE BASE PADS, FLOOR PLATES, INSERTS

MAGAZINE BASE PADS, FLOOR PLATES, INSERTS

Shop by:

Color
Manufacturer
Your results are being filtered by:
  • Category -> Sig Sauer P320 Gun Parts
Remove Filters

Products

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended Brass

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended Brass

Brass Base Pads are perfect for competitors looking to add weight to their pistol. As compared to our 6061 Aluminum pads with anodized coating for the P320, P226 or VP9/P30 the Brass Base Pads are significantly heavier; more than triple the weight.For USPSA Production, ensure you weigh your setup to ensure you are under the maximum weight limit.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

  • Brass (P320 Extended Pad) – 3.75 ounces
  • Brass (P320 Standard) – 1.1 ounce
  • Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
  • OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

BPD-SIG-32X-HDE-BRASS

In stock

$26.95

SIG Magazine Base Plate - P320 21RND - COY

SIG Magazine Base Plate - P320 21RND - COY

Factory replacement extended magazine floorplate for the P320. Compatible with the new X-Grip Modules.

*Only compatible with current 21 round magazines*

KIT-MOD-MAG-XFLR-PLT-COY

In stock

$11.95

Align P320 X-Universal 10-30 Magwell - Black

Align P320 X-Universal 10-30 Magwell - Black

The Align Tactical® X-UNIVERSAL™ 10-30 MAGWELL provides an enlarged funnel with patent-pending Over-Travel Compensating Guide¹, for the unique ability to accept OEM 10/17 round magazines without needing aftermarket floor plates. Offers reloading speed and consistency of all Sig Sauer® X-Series® (10/17/21/30) round OEM magazines with polymer or Legion/AXG® floor plates. Front ledge doubles as a palm support to lock in your grip.


Fits Sig Sauer® P320® X-Series FULL & CARRY OEM grip modules (Not compatible with X-Compact/AXG/Standard grip modules)

Precision CNC Machined from 7075 Aluminum
Limited Warranty applies to fitment (magwells are impact wear parts)
Drop of Removable liquid Thread Locker (such as Blue LOCTITE®) recommended during installation of 6-32 screw (fastening screw and 1/16 USA made Hex Tool included).

¹Floor-plate rear guiding ramps that horizontally center a magazine's notch to the mag catch

8302020

In stock

$94.00

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

  • This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDS

In stock

$19.99

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard Brass

Grayguns Hard Duty Use P320 Magazine Base Pad - Standard Brass

Brass Base Pads are perfect for competitors looking to add weight to their pistol. As compared to our 6061 Aluminum pads with anodized coating for the P320, P226 or VP9/P30 the Brass Base Pads are significantly heavier; more than triple the weight.For USPSA Production, ensure you weigh your setup to ensure you are under the maximum weight limit.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

  • Brass (P320 Extended Pad) – 3.75 ounces
  • Brass (P320 Standard) – 1.1 ounce
  • Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
  • OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

BPD-SIG-32X-HDS-BRASS

In stock

$23.95

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Grayguns Hard Duty Use P320 Magazine Base Pad - Extended

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Backwards compatible with all versions of P320 modules, including the standard and X-Series with or without the extended magwell installed.

  • This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

BPD-SIG-32X-HDE

In stock

$21.95

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Red

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Red

Springer Precision Sig P320 9mm +10 extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This base pad includes with an extra power spring to use with your follower. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They are specifically designed to work with Springer Precision mag wells. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. Includes a .050 hex driver that makes installation and removal a breeze. There will be a gap between the base pad and frame if used with a compact model. Red 2.474oz

SP0239-RED

In stock

$45.00

Springer Precision Sig P320 EZ .25" Base Pad - Round Hole - Red

Springer Precision Sig P320 EZ .25" Base Pad - Round Hole - Red

Spring Precision Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Red. 0.80 OZ Round hole.


These pads use the old style round nipple-style locking floorplate. Newer generation magazines have a square-style locking floortab/basepad. If you have this style, you need SP0211B, square hole type.

SP0212B-RED

In stock

$18.50

Springer Precision Sig P320 EZ .375" Base Pad - Round Hole - Blue

Springer Precision Sig P320 EZ .375" Base Pad - Round Hole - Blue

Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Blue. 1.08 OZ Round hole.


These pads use the old style round nipple-style locking floorplate. Newer generation magazines have a square-style locking floortab/basepad. If you have this style, you need SP0211, square hole type.

SP0212-BLUE

In stock

$18.50

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Blue

Springer Precision Sig P320 +10 9mm Base Pad w/Extra Power Spring - Blue

Springer Precision Sig P320 9mm +10 extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This base pad includes with an extra power spring to use with your follower. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They are specifically designed to work with Springer Precision mag wells. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. Includes a .050 hex driver that makes installation and removal a breeze. There will be a gap between the base pad and frame if used with a compact model. Blue 2.474oz

SP0239-BLUE

In stock

$45.00

Springer Precision Sig P320 EZ .375" Base Pad - Round Hole - Red

Springer Precision Sig P320 EZ .375" Base Pad - Round Hole - Red

Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Red. 1.08 OZ Round hole.


These pads use the old style round nipple-style locking floorplate. Newer generation magazines have a square-style locking floortab/basepad. If you have this style, you need SP0211, square hole type.

SP0212-RED

In stock

$18.50

Springer Precision Sig P320 EZ .25" Base Pad - Round Hole - Blue

Springer Precision Sig P320 EZ .25" Base Pad - Round Hole - Blue

Spring Precision Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Blue. 0.80 OZ Round hole.


These pads use the old style round nipple-style locking floorplate. Newer generation magazines have a square-style locking floortab/basepad. If you have this style, you need SP0211B, square hole type.

SP0212B-BLUE

In stock

$18.50

SIG Magazine Base Plate - P320 21RND - BLK

SIG Magazine Base Plate - P320 21RND - BLK

Factory replacement extended magazine floorplate for the P320. Compatible with the new X-Grip Modules. Black.

*Only compatible with current 21 round magazines*

KIT-MOD-MAG-XFLR-PLT-BLK

Out of stock

Out of stock
Sig Sauer Magazine Base Plate - P320/P250 9mm, .40SW, .357SIG New Style

Sig Sauer Magazine Base Plate - P320/P250 9mm, .40SW, .357SIG New Style

Sig Sauer factory base pad for Sig Sauer P320/P250 new style grip modules. Round Hole.

1300338

Out of stock

Out of stock
Sig Sauer P320 and P250 Magazine Base Plate Kit

Sig Sauer P320 and P250 Magazine Base Plate Kit

Sig Sauer factory floor plate kit for P320/P250 Full Size and Compact magazines. Includes a base pad and insert. Works with all calibers of Full Size and Compact size magazines. Does not work with Sub-Compact magazines.

Please Note: This floor plate is not compatible with early grip modules of the P250 series.

KIT-MOD-MAG-FLR-PLT-BLK

Out of stock

Out of stock