MAGAZINE BASE PADS, FLOOR PLATES, INSERTS

Brass Base Pads are perfect for competitors looking to add weight to their pistol. As compared to our 6061 Aluminum pads with anodized coating for the P320, P226 or VP9/P30 the Brass Base Pads are significantly heavier; more than triple the weight.For USPSA Production, ensure you weigh your setup to ensure you are under the maximum weight limit.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

• Brass (P320 Extended Pad) – 3.75 ounces
• Brass (P320 Standard) – 1.1 ounce
• Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
• OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

Springer Precision Sig P320 9mm +10 extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This base pad includes with an extra power spring to use with your follower. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They are specifically designed to work with Springer Precision mag wells. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. Includes a .050 hex driver that makes installation and removal a breeze. There will be a gap between the base pad and frame if used with a compact model. Blue 2.474oz

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

• This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

This basepad is designed by shooters for shooters for the SIG MPX magzine and can add up to 10 rounds in 9mm. These are made from high quality aluminum and hard anodized to provide an ultra durable platform to support the MPX magazines. Our extentions are easy to remove and clean. Whether it is for duty use, competition, or recreation, this is a great addition to your MPX. For use with the 20 and 30rd mags only. Blue 2.856oz

We now offer an extra power magazine spring for the MPX extensions. It is not necessary for normal feeding and functioning, however, it may be necessary for slide lock functionality after last shot fired.

***DO NOT USE THE BOTTOM PLATE ON YOUR MAGAZINE SPRING.***

The Springer Precision FASTMAG coupler is designed by shooters for shooters of the SIG MPX. These are made from high quality aluminum and hard anodized to provide an ultra durable platform to support the MPX magazines. Our coupler are easy to remove and clean. Whether it is for duty use, competition, or recreation, this is a great addition to your MPX. Black 2.088oz

*** For 20 and 30 round MPX magazines ONLY.

THEY WILL NOT FIT THE 10 ROUND MAGS.

The Springer Precision FASTMAG coupler is designed by shooters for shooters of the SIG MPX. These are made from high quality aluminum and hard anodized to provide an ultra durable platform to support the MPX magazines. Our coupler are easy to remove and clean. Whether it is for duty use, competition, or recreation, this is a great addition to your MPX. Blue 2.088oz

*** For 20 and 30 round MPX magazines ONLY.

THEY WILL NOT FIT THE 10 ROUND MAGS.

The Springer Precision FASTMAG coupler is designed by shooters for shooters of the SIG MPX. These are made from high quality aluminum and hard anodized to provide an ultra durable platform to support the MPX magazines. Our coupler are easy to remove and clean. Whether it is for duty use, competition, or recreation, this is a great addition to your MPX. Red 2.088oz

*** For 20 and 30 round MPX magazines ONLY.

THEY WILL NOT FIT THE 10 ROUND MAGS.

Springer Precision SIG P320/P250 9/40 140mm extended capacity base pads are CNC machined from aluminum and hard anodized for a long service life. This lengthens the magazine and adds rounds to your magazine. More rounds can be added if you choose the Grams follower options. The unique locking mechanism allows a very solid attachment with a simple backing out of the discrete set screw. They fit the USPSA 140mm magazine gauge. The unique attachment design provides a low profile, sleek design that is very stable and easy to remove. * We include a .050 hex driver that makes installation and removal a breeze. Up to 23 9mm and 20 40. cal rounds with the extra capacity follower kit. Comes with an extra power spring. Blue 1.40 oz

Spring Precision Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .25" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Red. 0.80 OZ Square hole.

These pads use the newer generation magazines that use a square-style locking floortab/basepad. The older generation use a round nipple-style locking insert. If you have this style, you need SP0212B, round hole type.

Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines. They are perfect for IDPA ESP and USPSA. Red. 1.08 OZ Square hole.

These pads use the newer generation magazines that use a square-style locking floortab/basepad. The older generation use a round nipple-style locking insert. If you have this style, you need SP0212, round hole type.

Designed for hard-duty use. Our custom Grayguns SIG Sauer P320 magazine base pads are manufactured from 6061 Aluminum. Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

The base pad is the same thickness as the OEM SIG base pad. A relief cut on the sides enhances malfunction drills, and allows for effective one-handed reloads using the belt or holster.

The cut mirrors the normal P320 module’s and creates a cut for the X-Series modules.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

• This the Extended Version Designed for the full-size magazine in a XSeries with the magwell. Also works with 21-round magazines and fits the standard P320.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

SIG factory Magazine Base Plate for (old style) P220 blued magazines that use the magazine spring to lock the plate.

SIG factory steel base plates for the Sig P226 .40/357 12RD and 9mm 15RD magazines. These are the newer Mec-Gar base plates and will fit the older production magazines along with the Mec-Gar brand magazines. Will not fit US made magazines.

Sig Sauer P226 10 round magazine base. This a factory replacement base for P226 9mm 10RD magazines and P226 .40S&W 10RD magazines. Will only fit 10RD magazine tubes.

SIG factory steel base plates for the Sig P226 9mm magazines. These are the original German base plates which are slightly shorter than the current production and will fit any of the factory P226 9mm, .40 or .357 magazines except the 10RD. Will work with the P228/P229 X-Grip with no modification required.

SIG factory Magazine Base Plate for P239 .40S&W and .357SIG magazines. Compatible with the 8 round magazine and L shaped insert.

Factory replacement extended magazine floorplate for the P320. Compatible with the new X-Grip Modules. Black.

*Only compatible with current 21 round magazines*

SIG factory Magazine Insert for P220 8RD magazines.