Command Arms polymer picatinney rail system that adds two 2.5" long rails at 45 degrees. Versatile rail mounted option for original polymer handguards on AR15 rifles. Easily mount lights or lasers on original style AR15 handguards. Mounting hardware is included. Made in Israel.

Timber Creek Outdoors Bi-Pod Mount compatible with any M-LOK system.

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3” Inside diameter
• 1.5” Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels

The Ergo Ultra Lite Slim 2-Piece Keymod Rail System is a drop in replacement for AR style rifles. Machined from 6061-T6 aluminum and weighing less than the standard M4 plastic handguards, the Ergo Keymod Rail features a standard M1913 picatinny rail up top and Keymod slots on both sides and bottom for mounting accessories as needed. Easy to install with no special tools required, simply remove the plastic hand guards, replace with the separate halves of the Ultra Lite Slim KeyMod and tighten the four included screws. Finished in a durable Dark Earth Cerakote.

Timber Creek Outdoors 5 slot rail section compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum.

Timber Creek Outdoors 15 inch Enforcer M-LOK Handguard.

• Slim lightweight design integrated with modular flexibility
• Durable aircraft grade billet aluminum body
• Barrel nut included
• No timing or shims required
• Full length mil-spec 1913 picatinny rail
• Lifetime warranty
• Compatible with AR 15 uppers
• Requires low profile gas block
• 9.5 oz including barrel nut

Machined in house from our custom 6061-T6 extrusion, White Label's house brand free float hand guards will provide you with a lifetime of service. Unlike many manufacturers who simply cut holes and slots in their extrusion, White Label machines every surface of the exterior to ensure a uniform and flat surface. Our 4140 steel barrel nut does not need to be indexed for gas tube clearance, and installs with a standard castle nut wrench. No custom made tooling required. Lifetime Guarantee

AR15 / M16 Hand Guard - 10" MLOK

• Machined from 6061-T6 aluminum
• Hard coat anodized per milspec
• 4140 steel barrel nut
• Top rail length: 9.85 inches
• Weight with mounting hardware: 8.6 ounces
• MLOK mounting points at 3:00, 6:00, and 9:00

• Machined from 6061-T6 aluminum
• Hard coat anodized per milspec
• 4140 steel barrel nut
• Top rail length: 15.0 inches
• Weight with mounting hardware: 11.3 ounces
• MLOK mounting points at 3:00, 6:00, and 9:00

Breek's newly developed RG2-S (Rugged Rail Mod2 Skeletonized) Handguard line up is an evolution from our previous lineup. Our Patent Pending locking mechanism uses a wedge block system that puts equal pressure all the way around the barrel nut. This gives you better harmonics and a much stronger mounting solution especially when you're putting pressure on the end using a bipod or sling.

The Newly Released RG2 handguards were developed specifically for suppressor builds, each length is designed to fit common barrel length and leave room for all types of quick attach suppressor mounting solutions. The skeletonized design shaves as much weight as posssible without sacrificing the integrity of the handguard. All edges are chamfered, blasted, then Type 3 Hardcoat anodized for a smooth feel.

Highlights

• Patent Pending Rugged Rail System - 2 Piece Wedge Blocks Allow for a Rock Solid Attachment
• Fits AR-15 & M4 variants (223, 556, 9mm, & 300blk)
• Fits Mil Spec Forged & Billet Style Uppers
• Handguard & Wedge Blocks are Made From Aircraft Grade 6061-T6 Aluminum
• Mil-Spec Type III Class 2 Hard Coat Anodize
• Large Cutouts Made to Reduce Weight and Provide Ventilation
• Slim-line, Smooth Handguard Profile
• Magpul Licensed M-LOK Mounting System
• Barrel Nut is Made From High Grade Steel & Coated
• Proudly Made in the USA
• Comes with our Breek Arms 1 Year Warranty

Advanced Specs

Handguard Length: 9.7 Inches

Total Weight w/ Barrel Nut: 10.4 Ounces

Barrel Nut Weight: 3.1 Ounces

Cutout Length (from longest point): 0.275 Inches

Inside Diameter (ID): 1.375 Inches

Front Outside Diameter (OD): 1.605 Inches

ID + Top Gas Tube Channel: 1.73 Inches

Gas Tube Channel Width: 0.475 Inches

Gas Block Compatibility: Low profile & adjustable low-profile gas blocks

Barrel Nut Wrench Size: 1 1/4"

Color: Black

Installation Instructions

1. Torque barrel nut to 40 - 60 ft pounds
2. Anti-Seize on the barrel nut is not necessary but recommended
3. Line the handguard top rail to the AR upper receiver rail for a seamless fit
4. Install wedges and torque two 10/32 bolts to 40 inch pounds

Timber Creek Outdoors 5 slot rail section compatible with any M-LOK system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum.

Timber Creek Outdoors 9 slot rail section compatible with any KeyMod system and creates a space for mounting accessories. CNC machined out of aircraft grade billet aluminum.

Timber Creek Outdoors Bi-Pod Mount compatible with any KeyMod system.

Timber Creek Outdoors 13 inch Enforcer M-LOK Handguard.

• Slim lightweight design integrated with modular flexibility
• Durable aircraft grade billet aluminum body
• Barrel nut included
• No timing or shims required
• Full length mil-spec 1913 picatinny rail
• Lifetime warranty
• Compatible with AR 15 uppers
• Requires low profile gas block
• 8.5 oz including barrel nut.

Breek's newly developed RG2-S (Rugged Rail Mod2 Skeletonized) Handguard line up is an evolution from our previous lineup. Our Patent Pending locking mechanism uses a wedge block system that puts equal pressure all the way around the barrel nut. This gives you better harmonics and a much stronger mounting solution especially when you're putting pressure on the end using a bipod or sling.

The Newly Released RG2 handguards were developed specifically for suppressor builds, each length is designed to fit common barrel length and leave room for all types of quick attach suppressor mounting solutions. The skeletonized design shaves as much weight as posssible without sacrificing the integrity of the handguard. All edges are chamfered, blasted, then Type 3 Hardcoat anodized for a smooth feel.

Highlights

• Patent Pending Rugged Rail System - 2 Piece Wedge Blocks Allow for a Rock Solid Attachment
• Fits AR-15 & M4 variants (223, 556, 9mm, & 300blk)
• Fits Mil Spec Forged & Billet Style Uppers
• Handguard & Wedge Blocks are Made From Aircraft Grade 6061-T6 Aluminum
• Mil-Spec Type III Class 2 Hard Coat Anodize
• Large Cutouts Made to Reduce Weight and Provide Ventilation
• Slim-line, Smooth Handguard Profile
• Magpul Licensed M-LOK Mounting System
• Barrel Nut is Made From High Grade Steel & Coated
• Proudly Made in the USA
• Comes with our Breek Arms 1 Year Warranty

Advanced Specs

Handguard Length: 13.7 Inches

Total Weight w/ Barrel Nut: 12.7 Ounces

Barrel Nut Weight: 3.1 Ounces

Cutout Length (from longest point): 0.275 Inches

Inside Diameter (ID): 1.375 Inches

Front Outside Diameter (OD): 1.605 Inches

ID + Top Gas Tube Channel: 1.73 Inches

Gas Tube Channel Width: 0.475 Inches

Gas Block Compatibility: Low profile & adjustable low-profile gas blocks

Barrel Nut Wrench Size: 1 1/4"

Color: Black

Installation Instructions

1. Torque barrel nut to 40 - 60 ft pounds
2. Anti-Seize on the barrel nut is not necessary but recommended
3. Line the handguard top rail to the AR upper receiver rail for a seamless fit
4. Install wedges and torque two 10/32 bolts to 40 inch pounds

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3” Inside diameter
• 1.5” Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3” Inside diameter
• 1.5” Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.