SUPPRESSOR PARTS
Shop by:
More
Products
SilencerCo 3-Lug Mount .45ACP Steel Black
|
SilencerCo's 3-Lug Mount is a quick-attach mounting option for guns with fixed barrels. It features a shorter overall length and is compatible with Octane, Omega K and Hybrid 46. This model is compatible with 3-lug 45ACP barrel. |
AC2448
In stock
$122.95
SilencerCo High Temp Suppressor Cover 6"
|
Engineered for extreme heat resistance, this cover shields your suppressor from scorching temperatures. Keep your firearm cool and maintain peak performance, even during rapid fire. Upgrade your setup with the ultimate high-temperature protection.*Rated up to 1600 degrees Fahrenheit
|
AC1983
In stock
$84.95
SilencerCo High Temp Suppressor Cover 7.5"
|
Engineered for extreme heat resistance, this cover shields your suppressor from scorching temperatures. Keep your firearm cool and maintain peak performance, even during rapid fire. Upgrade your setup with the ultimate high-temperature protection.*Rated up to 1600 degrees Fahrenheit
|
AC1984
In stock
$84.95
Breek Arms Plan B Sentinel Caged Flash Hider, .30 Cal
|
The Sentinel is a closed-tine, fully shrouded design for superior flash suppression and to reduce snagging on gear. Built for Plan B mounts and pin-and-weld builds, it delivers rock-solid alignment, compact length, and NVG-friendly signature reduction.
|
BRK4421
In stock
$64.99
Breek Arms Sentinel Caged Flash Hider for LOK 3QD, .30
|
The Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts, delivering unrivaled speed and simplicity. Its streamlined profile integrates seamlessly with any firearm for enhanced aesthetics and performance. The Breek-LOK 3QD Sentinel Caged Flash Hider mitigates muzzle flash by dispersing and redirecting gases, reinforced by internal threads that outperform standard flash hiders. This reduction in flash preserves a clear sight picture and prevents temporary blindness in low-light settings. Closed prongs eliminate snagging, remove the notorious “ring”, and bolster overall strength. The low-profile design maintains a clean, streamlined appearance on any setup.
|
BRK4321
In stock
$64.99
Breek Arms Sentinel Caged Flash Hider for LOK 3QD, 5.56
|
The Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts, delivering unrivaled speed and simplicity. Its streamlined profile integrates seamlessly with any firearm for enhanced aesthetics and performance. The Breek-LOK 3QD Sentinel Caged Flash Hider mitigates muzzle flash by dispersing and redirecting gases, reinforced by internal threads that outperform standard flash hiders. This reduction in flash preserves a clear sight picture and prevents temporary blindness in low-light settings. Closed prongs eliminate snagging, remove the notorious “ring”, and bolster overall strength. The low-profile design maintains a clean, streamlined appearance on any setup.
|
BRK4320
In stock
$64.99
Griffin Armament Direct Thread Piston, 9mm 1/2x28
|
Piston are H900 heat treated with a rust inhibitor. Please note, color and color pattern will vary due to the heat treatment.
|
GAR1228
In stock
$78.00
SilencerCo 3-Lug Muzzle Device 9mm Luger 1/2"-36 tpi
|
Silencerco's 3-Lug Muzzle Device fits on to your barrel allowing you to attach your suppressor. This model is compatible with .9mm firearms with 1/2''x36 threads.
|
AC2607
In stock
$77.95
SilencerCo 3-Lug Muzzle Device Black with .578"x28 Threads
|
Silencerco's 3-Lug Muzzle Device fits on to your barrel allowing you to attach your suppressor. This model is compatible with .45 ACP firearms with .578"x28 threads.
|
AC2605
In stock
$78.95
SilencerCo Piston 1/2"x28, 9mm
|
SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel, then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows semi-automatic cycling for unlocking pistol barrels. Throw a Fixed Barrel Spacer on for fixed barrel applications. SilencerCo pistons have female threading that attaches to our SilencerCo threaded barrels.
|
AC25
In stock
$79.95
Griffin Armament DUAL-LOK™ HUB Mount, 1.375x24
|
Griffin Armament is proud to introduce DUAL-LOK™, our newest QD mounting system for rifle suppressors. The DUAL-LOK™ system is comprised from two components, the DUAL-LOK™ Mount or equipped suppressor and the DUAL-LOK™ muzzle device (of your choice). This page is for the DUAL-LOK™ HUB Mount, a 1.375×24 threaded interface. A quality QD system should be accurate, robust, reliable, require minimal training, and be free of wear prone metal on metal teeth or ratchets, thereby guaranteeing a longer trouble free service life with minimal maintenance needed. Griffin’s DUAL-LOK™ QD mounting system was designed around these objectives. What makes this mounting system unique? It is a combination of desirable mechanical features and performance characteristics in a lightweight, compact system. DUAL-LOK™ combines a precision, sealing, and alignment taper interface with a stub ACME thread, and provides ease of secure attachment. A robust wave spring provides a reliable and positive heat-resistant spring action to the redundant locking collar (second locking feature). The locking collar is semi permanently installed to the mount via factory press slpined, stainless steel, taper pins. Since the mount has no wear prone metal on metal sliding actions like many other mounts, there is no need for the operator to disassemble the system. This locking ring includes three anti-rotation splines which ensure the suppressor will not come off inadvertently. The muzzle device integrates 60 machined mounting position grooves which is doubled by the mount’s two locking positions, hence the double entendre DUAL-LOK™. How is this achieved? The mounts’ two locking positions are machined out of phase of one another by 3 degrees which provides the 120 effective locking positions and ensures a tightly mounted and locked suppressor. When the suppressor is installed only one of the two positions will generally function by allowing the spring to push the locking collar rearward over the splines. Substantial efforts are taken in the manufacturing and inspection of the DUAL-LOK™ products to ensure Griffin customers are outfitted with the best QD mounting systems available.
|
DL1375X24
Out of stock
Griffin Armament PLAN-A Taper Mount Adapter for 1.375x24 HUB Suppressors
|
The Taper Mount PLAN-A™ adapter provides a Griffin Taper Mount interface for Silencerco® Hybrid™, OMEGA™, and Harvester 338™ as well as DEAD AIR ARMAMENT™ NOMAD™, and other suppressors with mount interface inside diameter threading of 1.375x24. No proprietary tools required. Machined in our Watertown headquarters from billet 17-4 stainless steel, this adapter provides a precision made interface that gives you access to nationally recognized Griffin Taper Mounts and accessories. Precision, durability, and value are at the core of Griffin product design and manufacturing. This product allows you to affordable kit up with the best muzzle devices in the industry.
|
TMA1375x24
Out of stock
Griffin Armament Rachet-lok Front Cap, .30 cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GAA30FC
Out of stock
Griffin Armament Rachet-lok Front Cap, .36 Cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GABUSH36FC
Out of stock
Griffin Armament Taper Mount EZ Brake, .30 cal 5/8x24
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ30C5824
Out of stock
SilencerCo Charlie Piston Mount
|
This mount is used to attach the Omega 36M to handguns via pistons. It is also required to attach 3-lug mounts to your Omega 36M. |
AC4751
Out of stock
SilencerCo Piston .578x28, 45 ACP
|
SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel, then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows semi-automatic cycling for unlocking pistol barrels. Throw a Fixed Barrel Spacer on for fixed barrel applications. SilencerCo pistons have female threading that attaches to our SilencerCo threaded barrels.
|
AC24
Out of stock
Surefire Suppressor Adapter Muzzle Brake 1/2"-28 tpi, 5.56x45mm
|
SureFire Suppressor Adapter/Muzzle Brake, fits M4 / M16 weapons and variants with 1/2-28 muzzle threads. It greatly reduces both recoil impulse and muzzle rise so that the weapon tracks straight back to keep you on target for faster shot-to-shot recovery. The patented Impulse Diffusion design minimizes side blast and rear-directed concussion effects. Precision machined from US mill-certified heat-treated stainless steel bar stock including high-precision single-point cut threads for optimum thread interface the SFMB-556-1/2-28 muzzle brake has a black Ionbond DLC coating to provide maximum protection under harsh environmental conditions and to facilitate cleaning even after extreme use. The SFMB-556-1/2-28 also serves as a rock-solid mounting adapter for SureFire SOCOM Series 5.56 mm Fast-Attach suppressors. A rear labyrinth seal minimizes potential carbon buildup in the indexing system and facilitates suppressor removal after extended firing.
|
SFMB-556-1/2-28
Out of stock