SUPPRESSOR PARTS
Shop by:
 More
|
Products
Griffin Armament Alignment Check Rod - .36cal
|
With the appropriate Griffin Armament Suppressor Alignment Check Rod, an end user or gunsmith can verify alignment of the chosen suppressor and mount with the desired host. Installation and use of this tool is simple and should prevent baffle strikes or any unexpected issues once you get to the range. Griffin Armament has gone to great lengths to accommodate a wide variety of thread pitch and caliber options across our silencer mount and adapter products. This gives practically every end user who wishes to suppress their host the opportunity to do so! With this wide range of compatibility comes its own set of issues, the main one being silencer and mount alignment to the host firearm’s bore. To use the Suppressor Check Alignment Rod:
If mount and silencer are in alignment, remove rod and enjoy your suppressed firearm! |
GASACR9
In stock
$69.95
Griffin Armament Alignment Check Rod - .45 cal
|
With the appropriate Griffin Armament Suppressor Alignment Check Rod, an end user or gunsmith can verify alignment of the chosen suppressor and mount with the desired host. Installation and use of this tool is simple and should prevent baffle strikes or any unexpected issues once you get to the range. Griffin Armament has gone to great lengths to accommodate a wide variety of thread pitch and caliber options across our silencer mount and adapter products. This gives practically every end user who wishes to suppress their host the opportunity to do so! With this wide range of compatibility comes its own set of issues, the main one being silencer and mount alignment to the host firearm’s bore. To use the Suppressor Check Alignment Rod:
If mount and silencer are in alignment, remove rod and enjoy your suppressed firearm! |
GASACR45
In stock
$69.95
Griffin Armament Dual Lok EZ Brake, 5.56mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the DUAL-LOK™ EZ-Brake™ features 3 radial slots which provide effective recoil mitigation. The DUAL-LOK™ EZ-brake™ weighs 2.5 ounces, making it one of the lightest mounts available for the DUAL-LOK™ Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation. |
DLEZ22C1228
In stock
$90.90
Griffin Armament Rachet-lok Front Cap, .30 cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GAA30FC
In stock
$76.00
Griffin Armament Rachet-lok Front Cap, .36 Cal
|
The patented Ratchet-LOK™ cap system, allows users to shoot high volume rate of fire with products that feature this technology, without the worry of the end cap loosening and components of the product becoming lost or damaged. End users must use a 3 prong car stock wrench to loosen and remove the end cap. These caps come in a variety of apertures in both a dimpled flat cap and patented low profile flash hider design.
Using appropriate end caps for the caliber selected will reduce sound pressure by 2 - 5db but even more on certain calibers. |
GABUSH36FC
In stock
$76.00
Griffin Armament Taper Mount EZ Brake, 5.56mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ22C1228
In stock
$81.00
HUXWRX HUB QD Adapter 2.0
|
The HUXWRX HUB-QD Adapter 2.0 is designed to allow any suppressor that has 1.375X24 thread pattern mounting to be compatible with HUXWRX & OSS QD muzzle devices. |
3486
In stock
$187.00
JK Armament HD HUB DTM, 1/2''x28
|
The Direct Thread Mount features the industry standard HUB 1.37524 TPI (1-3/824 TPI) thread pitch, which works with all JK 155 suppressors and dozens of suppressors from many other manufacturers as well. On the firearm side, our Direct Thread Mount is available in five (and counting!) different thread sizes to match the factory muzzle threads on your barrel.
|
JK155HDM28
In stock
$99.75
Rugged Piston M13.5x1 LH, 9mm
|
Rugged Suppressors piston uses a non-slotted design creating a full circumference gas seal. This drastically lowers gas blowback for a more enjoyable shooting experience. Machined from 17-4 Stainless Steel and heat treated this piston is built to last. *When using a piston on a fixed barrel platform such as a carbine or subgun the spring must be replaced with a Fixed barrel spacer.
|
OP003
In stock
$65.00
SilencerCo 3-Lug Mount .45ACP Steel Black
|
SilencerCo's 3-Lug Mount is a quick-attach mounting option for guns with fixed barrels. It features a shorter overall length and is compatible with Octane, Omega K and Hybrid 46. This model is compatible with 3-lug 45ACP barrel. |
AC2448
In stock
$122.95
SilencerCo Charlie Piston Mount
|
This mount is used to attach the Omega 36M to handguns via pistons. It is also required to attach 3-lug mounts to your Omega 36M. |
AC4751
In stock
$118.15
SilencerCo High Temp Suppressor Cover 6"
|
Engineered for extreme heat resistance, this cover shields your suppressor from scorching temperatures. Keep your firearm cool and maintain peak performance, even during rapid fire. Upgrade your setup with the ultimate high-temperature protection.*Rated up to 1600 degrees Fahrenheit
|
AC1983
In stock
$84.95
Breek Arms Plan B Sentinel Caged Flash Hider, 5.56
|
The Sentinel is a closed-tine, fully shrouded design for superior flash suppression and to reduce snagging on gear. Built for Plan B mounts and pin-and-weld builds, it delivers rock-solid alignment, compact length, and NVG-friendly signature reduction.
|
BRK4420
In stock
$64.99
Breek Arms Sentinel Caged Flash Hider for LOK 3QD, .30
|
The Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts, delivering unrivaled speed and simplicity. Its streamlined profile integrates seamlessly with any firearm for enhanced aesthetics and performance. The Breek-LOK 3QD Sentinel Caged Flash Hider mitigates muzzle flash by dispersing and redirecting gases, reinforced by internal threads that outperform standard flash hiders. This reduction in flash preserves a clear sight picture and prevents temporary blindness in low-light settings. Closed prongs eliminate snagging, remove the notorious “ring”, and bolster overall strength. The low-profile design maintains a clean, streamlined appearance on any setup.
|
BRK4321
In stock
$64.99
Breek Arms Sentinel Caged Flash Hider for LOK 3QD, 5.56
|
The Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts, delivering unrivaled speed and simplicity. Its streamlined profile integrates seamlessly with any firearm for enhanced aesthetics and performance. The Breek-LOK 3QD Sentinel Caged Flash Hider mitigates muzzle flash by dispersing and redirecting gases, reinforced by internal threads that outperform standard flash hiders. This reduction in flash preserves a clear sight picture and prevents temporary blindness in low-light settings. Closed prongs eliminate snagging, remove the notorious “ring”, and bolster overall strength. The low-profile design maintains a clean, streamlined appearance on any setup.
|
BRK4320
In stock
$64.99
Griffin Armament Alignment Check Rod - .30cal
|
With the appropriate Griffin Armament Suppressor Alignment Check Rod, an end user or gunsmith can verify alignment of the chosen suppressor and mount with the desired host. Installation and use of this tool is simple and should prevent baffle strikes or any unexpected issues once you get to the range. Griffin Armament has gone to great lengths to accommodate a wide variety of thread pitch and caliber options across our silencer mount and adapter products. This gives practically every end user who wishes to suppress their host the opportunity to do so! With this wide range of compatibility comes its own set of issues, the main one being silencer and mount alignment to the host firearm’s bore. To use the Suppressor Check Alignment Rod:
If mount and silencer are in alignment, remove rod and enjoy your suppressed firearm! |
GASACR30
In stock
$69.95
Griffin Armament Direct Thread Piston, 9mm 1/2x28
|
Piston are H900 heat treated with a rust inhibitor. Please note, color and color pattern will vary due to the heat treatment.
|
GAR1228
In stock
$78.00
Griffin Armament Taper Mount EZ Brake, 9mm 1/2x28
|
Constructed of 17-4 PH stainless steel, the Taper Mount EZ-Brake™ features 6 radial slots which provides effective recoil mitigation. The Taper Mount EZ-brake™ weighs 2.0 ounces, making it one of the lightest mounts available for the Taper Mount Interface. The lighter weight reduces suppressor system weight while making the host firearm barrel lighter and more responsive to the shooter. The EZ-Brake™ does not require timing and will interface with a 13/16" standard socket wrench for installation.
|
TMEZ9C1228
In stock
$81.00